Optimization of WEDM Process Parameters for MRR and Surface Roughness using Taguchi-Based Grey Relational Analysis

reserved by the publisher. No part of this journal may be reproduced or used in any form or by any means without written permission from the publisher, except for noncommercial, educational use including classroom teaching purposes. Product or company names used in this journal are for identification purposes only. Inclusion of the names of the products or companies does not indicate a claim of ownership by IGI Global of the trademark or registered trademark. The views expressed in this journal are those of the authors but not necessarily of IGI Global.

[1]  Y. S. Tarng,et al.  Determination of optimal cutting parameters in wire electrical discharge machining , 1995 .

[2]  Prasanta Sahoo,et al.  Optimisation of EDM process parameters using grey-Taguchi technique , 2014 .

[3]  T. A. El-Taweel,et al.  Modelling the machining parameters of wire electrical discharge machining of Inconel 601 using RSM , 2005 .

[4]  R. Ramakrishnan,et al.  Multi response optimization of wire EDM operations using robust design of experiments , 2006 .

[5]  Milan Kumar Das,et al.  Optimization of WEDM process parameters on EN31steel by weighted principal component analysis , 2014 .

[6]  Saurav Datta,et al.  Modeling, simulation and parametric optimization of wire EDM process using response surface methodology coupled with grey-Taguchi technique , 2010 .

[7]  Bulan Abdullah,et al.  Influence of machine feed rate in WEDM of Titanium Ti-6Al-4V with constant current (6A) using brass wire , 2012 .

[8]  Kamlakar P Rajurkar,et al.  Thermal modeling and on-line monitoring of wire-EDM , 1993 .

[9]  Jatinder Kumar,et al.  Prediction of Surface Roughness in Wire Electric Discharge Machining (WEDM) Process based on Response Surface Methodology , 2012 .

[10]  Prasanta Sahoo,et al.  Optimization of Surface Roughness and MRR in EDM Using WPCA , 2013 .

[11]  Dingwen Yu,et al.  Influence of machining parameters on surface roughness in finish cut of WEDM , 2007 .

[12]  Trevor A Spedding,et al.  Study on modeling of wire EDM process , 1997 .

[13]  Kuo-Wei Lin,et al.  Optimizing Multiple Quality Characteristics of Wire Electrical Discharge Machining via Taguchi method-based Gray analysis for Magnesium Alloy , 2010 .

[14]  M. M. M. Sarcar,et al.  Evaluation of optimal parameters for machining brass with wire cut EDM , 2009 .

[15]  Amar Patnaik,et al.  Parametric optimization of wire electrical discharge machining (WEDM) process using taguchi method , 2006 .

[16]  Alakesh Manna,et al.  Taguchi and Gauss elimination method: A dual response approach for parametric optimization of CNC wire cut EDM of PRAlSiCMMC , 2006 .

[17]  J. Deng,et al.  Introduction to Grey system theory , 1989 .

[18]  Yunn-Shiuan Liao,et al.  A study on the machining-parameters optimization of wire electrical discharge machining , 1997 .

[19]  M. S. Shunmugam,et al.  Characteristics of wire-electro discharge machined Ti6Al4V surface , 2004 .

[20]  T. C. Lee,et al.  Processing of advanced ceramics using the wire-cut EDM process , 1997 .