Effect of surface scallop tool marks generated in micro-milling repairing process on the optical performance of potassium dihydrogen phosphate crystal
暂无分享,去创建一个
Jiubin Tan | Wei Liao | Xiaodong Yuan | Qi Liu | Jian Cheng | Linjie Zhao | Mingjun Chen | Yong Xiao | Hao Yang | Chen Jing | Jing Chen
[1] Jiang Guo,et al. On the machining of selective laser melting CoCrFeMnNi high-entropy alloy , 2018, Materials & Design.
[2] Qiao Xu,et al. Laser induced damage due to scratches in the surface of nonlinear optical crystals KH2PO4 (KDP) , 2017 .
[3] Xiaoyan Zeng,et al. A simulation study of dual laser beam separation technology for thick transparent inorganic materials , 2017 .
[4] W. Steele,et al. Scalable process for mitigation of laser-damaged potassium dihydrogen phosphate crystal optic surfaces with removal of damaged antireflective coating. , 2017, Applied optics.
[5] T. S. Hong,et al. Surface Defects in Groove Milling of Hastelloy-C276 Under Fluid Coolant , 2016 .
[6] Manyalibo J. Matthews,et al. Optics Recycle Loop Strategy for NIF Operations above UV Laser-Induced Damage Threshold , 2016 .
[7] Michael J. Runkel,et al. Large Optics for the National Ignition Facility , 2016 .
[8] Bruno Villette,et al. LMJ/PETAL laser facility: Overview and opportunities for laboratory astrophysics , 2015 .
[9] Wei Liao,et al. Role of tool marks inside spherical mitigation pit fabricated by micro-milling on repairing quality of damaged KH2PO4 crystal , 2015, Scientific Reports.
[10] L. Lamaignère,et al. Modeling surface defects in fused silica optics for laser wave propagation , 2015 .
[11] Jian Cheng,et al. Research on the critical condition of Brittle-Ductile Transition about Micro-Milling of KDP crystal and experimental verification , 2015 .
[12] Wanguo Zheng,et al. Characteristics of Laser-Induced Surface Damage on Large-Aperture KDP Crystals at 351 nm , 2015 .
[13] Wei Liao,et al. Effect of structural parameters of Gaussian repaired pit on light intensity distribution inside KH2PO4 crystal , 2014 .
[14] Paul Geraghty,et al. Mitigation of laser damage on National Ignition Facility optics in volume production , 2013, Laser Damage.
[15] Qiang Liu,et al. Development of pseudo-random diamond turning method for fabricating freeform optics with scattering homogenization. , 2013, Optics express.
[16] Jian Cheng,et al. Study on the optical performance and characterization method of texture on KH2PO4 surface processed by single point diamond turning , 2013 .
[17] Jian Cheng,et al. Fabrication of spherical mitigation pit on KH2PO4 crystal by micro-milling and modeling of its induced light intensification. , 2013, Optics express.
[18] Mingjun Chen,et al. Study of modulation property to incident laser by surface micro-defects on KH 2 PO 4 crystal , 2012 .
[19] I. Buj-Corral,et al. Surface topography in ball-end milling processes as a function of feed per tooth and radial depth of cut , 2012 .
[20] S. Qiu,et al. Fabrication of mitigation pits for improving laser damage resistance in dielectric mirrors by femtosecond laser machining. , 2011, Applied optics.
[21] M. Feit,et al. Searching for optimal mitigation geometries for laser-resistant multilayer high-reflector coatings. , 2011, Applied optics.
[22] Christopher J Stolz,et al. The National Ignition Facility: the path to a carbon-free energy future , 2011, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.
[23] S. Svanberg,et al. Active feedback regulation of a Michelson interferometer to achieve zero-background absorption measurements. , 2011, Applied optics.
[24] Li Jian-long,et al. Propagation of the electromagnetic field in anisotropic relief gratings , 2010 .
[25] Stuart A. Collins,et al. Optical Effects of Surface Finish by Ultraprecision Single Point Diamond Machining , 2010 .
[26] R C Montesanti,et al. Precision Engineering within the National Ignition Campaign , 2010 .
[27] Erdem Ozturk,et al. Investigation of lead and tilt angle effects in 5-axis ball-end milling processes , 2009 .
[28] Bertrand Bertussi,et al. Preliminary results on mitigation of KDP surface damage using the ball dimpling method , 2007, SPIE Laser Damage.
[29] Paul Geraghty,et al. Surface damage growth mitigation on KDP/DKDP optics using single-crystal diamond micro-machining ball end mill contouring , 2006, SPIE Laser Damage.
[30] Yongkang Guo,et al. Near field analysis for periodic diffractive gratings using Fourier modal method , 2006 .
[31] Jenq-Shyong Chen,et al. A study of the surface scallop generating mechanism in the ball-end milling process , 2005 .
[32] Michael J. Runkel,et al. NIF Pockels cell and frequency conversion crystals , 2004, SPIE LASE.
[33] Alan K. Burnham,et al. Methods for mitigating growth of laser-initiated surface damage on DKDP optics at 351 nm , 2003, SPIE Laser Damage.
[34] A. K. Burnham,et al. Developing KH2PO4 and KD2PO4 crystals for the world's most power laser , 2002 .
[35] F. Génin,et al. Role of light intensification by cracks in optical breakdown on surfaces. , 2001, Journal of the Optical Society of America. A, Optics, image science, and vision.
[36] Xiaodong Yuan,et al. Laser performance of the SG-III laser facility , 2016, High Power Laser Science and Engineering.
[37] Mike Dunne,et al. A high-power laser fusion facility for Europe , 2006 .