Parametric Assessment of Stress Development and Cracking in Internally Cured Restrained Mortars Experiencing Autogenous Deformations and Thermal Loading

A finite element model is used to examine how the properties of cementitious mortar are related to the stress development in the dual ring test. The results of this investigation are used to explain the thermal cracking behavior of mixtures containing prewetted lightweight aggregates (LWA) by quantifying the contribution of several material properties individually. In addition to the beneficial effects of using the LWA as an internal curing agent to reduce the autogenous shrinkage of concrete, the LWA also helps to reduce the potential for thermal cracking due to a lower elastic modulus and increased stress relaxation. The rate of stress development, age of cracking, and magnitude of the temperature drop necessary to induce cracking in a dual ring specimen are dependent on a variety of factors, including the coefficient of thermal expansion of both the cementitious mortar and the restraining rings, elastic modulus of the mortar, creep effect of the mortar, and rate of thermal loading. Depending on the rate of cooling, cracking may or may not occur. The slowest rate of cooling (2.5∘C/h) minimizes the effects of creep while cooling rates faster than 8∘C/h can produce a thermal gradient through the mortar cross-section that needs to be considered.

[1]  T. C. DuMond,et al.  Transactions of the American Society for Metals , 1961 .

[2]  Aleksandra Radlinska,et al.  Comments on the interpretation of results from the restrained ring test , 2008 .

[3]  Akhter B. Hossain,et al.  Assessing residual stress development and stress relaxation in restrained concrete ring specimens , 2004 .

[4]  R. W. Cannon,et al.  EFFECT OF RESTRAINT, VOLUME CHANGE, AND REINFORCEMENT ON CRACKING OF MASSIVE CONCRETE , 1973 .

[5]  P. Bowen,et al.  Changes in portlandite morphology with solvent composition: Atomistic simulations and experiment , 2011 .

[6]  Tommy Nantung,et al.  A Dual Concentric Ring Test for Evaluating Residual Stress Development due to Restrained Volume Change , 2010 .

[7]  Folker H. Wittmann,et al.  Influence of age of loading, water-cement ratio and rate of loading on fracture energy of concrete , 1987 .

[8]  CH. ED. Guillaume.  Invar and Its Applications , 1904, Nature.

[9]  Surendra P. Shah,et al.  Fracture Mechanics of Concrete: Applications of Fracture Mechanics to Concrete, Rock and Other Quasi-Brittle Materials , 1995 .

[10]  J. Weiss,et al.  Estimating residual stress in the restrained ring test under circumferential drying , 2006 .

[11]  Pietro Lura,et al.  Performance of Shrinkage-Reducing Admixtures at Different Humidities and at Early Ages , 2008 .

[12]  Marianne Tange Hasholt,et al.  Use of Superabsorbent Polymers and Other New Additives in Concrete , 2010 .

[13]  E. Wohlfarth.  The invar problem , 1975 .

[14]  Lars Damkilde,et al.  Early Age Fracture Mechanics and Cracking of Concrete: Experiments and Modelling , 2003 .

[15]  D. W. Hobbs,et al.  The dependence of the bulk modulus, Young's modulus, creep, shrinkage and thermal expansion of concrete upon aggregate volume concentration , 1971 .

[16]  Denis Mitchell,et al.  THERMAL PROPERTIES AND TRANSIENT THERMAL ANALYSIS OF STRUCTURAL MEMBERS DURING HYDRATION , 1998 .

[17]  Dale P. Bentz,et al.  Early-Age Properties of Cement-Based Materials: I. Influence of Cement Fineness , 2008 .

[18]  Kimberly E. Kurtis,et al.  Effect of Internally Stored Water on Creep of High-Performance Concrete , 2008 .

[19]  R. Springenschmid,et al.  Prevention of thermal cracking in concrete at early ages : state-of-the-art report presented by RILEM Technical Committee 119, Avoidance of Thermal Cracking in Concrete at Early Ages , 1998 .

[20]  Kyung-Joon Shin,et al.  Role of Lightweight Synthetic Particles on the Restrained Shrinkage Cracking Behavior of Mortar , 2011 .

[21]  Surendra P. Shah,et al.  Two Parameter Fracture Model for Concrete , 1985 .

[22]  Ryan Henkensiefken,et al.  INTERNAL CURING IN CEMENTITIOUS SYSTEMS MADE USING SATURATED LIGHTWEIGHT AGGREGATE , 2008 .

[23]  Y. Nakamura.  The invar problem , 1976 .

[24]  J. S. Lai,et al.  Creep and Relaxation of Nonlinear Viscoelastic Materials: With an Introduction to Linear Viscoelasticity , 2012 .

[25]  Dale P. Bentz,et al.  A review of early-age properties of cement-based materials , 2008 .

[26]  Bradley Justin Pease,et al.  Quantifying the Influence of Specimen Geometry on the Results of the Restrained Ring Test , 2006 .

[27]  Dale P. Bentz,et al.  Mitigation strategies for autogenous shrinkage cracking , 2004 .

[28]  Bernard Samuel Lement.  The dimensional behavior of invar , 1949 .

[29]  Z. Bažant,et al.  Fracture and Size Effect in Concrete and Other Quasibrittle Materials , 1997 .

[30]  D. Bentz,et al.  Standard Test Method for Autogenous Strain of Cement Paste and Mortar , 2007 .

[31]  Tommy Nantung,et al.  Saw-Cutting Guidelines for Concrete Pavements: Examining the Requirements for Time and Depth of Saw-Cutting , 2007 .

[32]  Kyle A. Riding,et al.  Effects of Construction Time and Coarse Aggregate on Bridge Deck Cracking , 2009 .

[33]  Sang-Soo Kim,et al.  A simple test procedure for evaluating low temperature crack resistance of asphalt concrete : executive summary report. , 2009 .

[34]  S. Dean,et al.  Shrinkage Cracking Behavior of Fiber Reinforced Concrete: As Assessed Using the Restrained Ring Test , 2010 .

[35]  W. Weiss.  Prediction of early-age shrinkage cracking in concrete elements , 1999 .

[36]  Ravindra Gettu,et al.  Rate Effects and Load Relaxation in Static Fracture of Concrete , 1992 .