A novel approach of battery pack state of health estimation using artificial intelligence optimization algorithm

Abstract An accurate battery pack state of health (SOH) estimation is important to characterize the dynamic responses of battery pack and ensure the battery work with safety and reliability. However, the different performances in battery discharge/charge characteristics and working conditions in battery pack make the battery pack SOH estimation difficult. In this paper, the battery pack SOH is defined as the change of battery pack maximum energy storage. It contains all the cells' information including battery capacity, the relationship between state of charge (SOC) and open circuit voltage (OCV), and battery inconsistency. To predict the battery pack SOH, the method of particle swarm optimization-genetic algorithm is applied in battery pack model parameters identification. Based on the results, a particle filter is employed in battery SOC and OCV estimation to avoid the noise influence occurring in battery terminal voltage measurement and current drift. Moreover, a recursive least square method is used to update cells' capacity. Finally, the proposed method is verified by the profiles of New European Driving Cycle and dynamic test profiles. The experimental results indicate that the proposed method can estimate the battery states with high accuracy for actual operation. In addition, the factors affecting the change of SOH is analyzed.

[1]  Jianqiu Li,et al.  A review on the key issues for lithium-ion battery management in electric vehicles , 2013 .

[2]  Gregory L. Plett,et al.  Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs: Part 2. Modeling and identification , 2004 .

[3]  Zonghai Chen,et al.  A novel approach of remaining discharge energy prediction for large format lithium-ion battery pack , 2017 .

[4]  Bor Yann Liaw,et al.  State of health estimation for lithium ion batteries based on charging curves , 2014 .

[5]  Jianqiu Li,et al.  A highly accurate predictive-adaptive method for lithium-ion battery remaining discharge energy prediction in electric vehicle applications , 2015 .

[6]  Michael A. Osborne,et al.  Gaussian process regression for forecasting battery state of health , 2017, 1703.05687.

[7]  W. P. M. H. Heemels,et al.  Energy management strategies for vehicular electric power systems , 2005, IEEE Transactions on Vehicular Technology.

[8]  C. Moo,et al.  Enhanced coulomb counting method for estimating state-of-charge and state-of-health of lithium-ion batteries , 2009 .

[9]  Federico Bella,et al.  Thermally cured semi-interpenetrating electrolyte networks (s-IPN) for safe and aging-resistant secondary lithium polymer batteries , 2016 .

[10]  Roger A. Dougal,et al.  Dynamic lithium-ion battery model for system simulation , 2002 .

[11]  Ke Wang,et al.  A PSO–GA optimal model to estimate primary energy demand of China , 2012 .

[12]  Lan-Rong Dung,et al.  Offline State-of-Health Estimation for High-Power Lithium-Ion Batteries Using Three-Point Impedance Extraction Method , 2017, IEEE Transactions on Vehicular Technology.

[13]  Chenbin Zhang,et al.  An adaptive remaining energy prediction approach for lithium-ion batteries in electric vehicles , 2016 .

[14]  Zhe Li,et al.  A dynamic capacity degradation model and its applications considering varying load for a large format Li-ion battery , 2016 .

[15]  Suleiman Abu-Sharkh,et al.  Rapid test and non-linear model characterisation of solid-state lithium-ion batteries , 2004 .

[16]  Kyung Ho Kim,et al.  Embedded fiber-optic sensing for accurate internal monitoring of cell state in advanced battery management systems part 1: Cell embedding method and performance , 2017 .

[17]  Jianqiu Li,et al.  A comparative study of commercial lithium ion battery cycle life in electric vehicle: Capacity loss estimation , 2014 .

[18]  Xuning Feng,et al.  Using probability density function to evaluate the state of health of lithium-ion batteries , 2013 .

[19]  Michael Buchholz,et al.  State-of-health monitoring of lithium-ion batteries in electric vehicles by on-board internal resistance estimation , 2011 .

[20]  Binggang Cao,et al.  State-of-health Estimation of Lithium-ion Battery Based on Interval Capacity , 2017 .

[21]  Zonghai Chen,et al.  An on-line estimation of battery pack parameters and state-of-charge using dual filters based on pack model , 2016 .

[22]  Zonghai Chen,et al.  A novel state of health estimation method of Li-ion battery using group method of data handling , 2016 .

[23]  C. L. Philip Chen,et al.  Intelligent Prognostics for Battery Health Monitoring Using the Mean Entropy and Relevance Vector Machine , 2014, IEEE Transactions on Systems, Man, and Cybernetics: Systems.

[24]  Fereidoon Moghadas Nejad,et al.  Hybrid PSO and GA approach for optimizing surveyed asphalt pavement inspection units in massive network , 2016 .

[25]  Federico Bella,et al.  Effect of lithium bis(trifluoromethylsulfonyl)imide salt-doped UV-cured glycidyl methacrylate , 2015, Journal of Solid State Electrochemistry.

[26]  Federico Bella,et al.  Newly Elaborated Multipurpose Polymer Electrolyte Encompassing RTILs for Smart Energy-Efficient Devices. , 2015, ACS applied materials & interfaces.

[27]  Jean-Michel Vinassa,et al.  Behavior and state-of-health monitoring of Li-ion batteries using impedance spectroscopy and recurrent neural networks , 2012 .

[28]  Federico Bella,et al.  A simple route toward next-gen green energy storage concept by nanofibres-based self-supporting electrodes and a solid polymeric design , 2016 .

[29]  Chris Manzie,et al.  Multi-time-scale observer design for state-of-charge and state-of-health of a lithium-ion battery , 2016 .