Composites ‘salt inside porous matrix’ for adsorption heat transformation: a current state-of-the-art and new trends
暂无分享,去创建一个
[1] L. W. Wang,et al. Influence of mass recovery on the performance of a heat pipe type ammonia sorption refrigeration system using CaCl2/activated carbon as compound adsorbent , 2008 .
[2] C. S. Tretiak,et al. Sorption and desorption characteristics of a packed bed of clay–CaCl2 desiccant particles , 2009 .
[3] Ruzhu Wang,et al. Adsorption ice makers for fishing boats driven by the exhaust heat from diesel engine: choice of adsorption pair , 2004 .
[4] P. Touzain,et al. A chemical heat pump using carbon fibers as additive. Part I: enhancement of thermal conduction , 1999 .
[5] Ahmed M. Hamed,et al. Desorption characteristics of desiccant bed for solar dehumidification/humidification air conditioning systems , 2003 .
[6] Bernard Spinner,et al. Thermodynamic based comparison of sorption systems for cooling and heat pumping , 1999 .
[7] Lun Zhang,et al. Momentum and heat transfer in the adsorbent of a waste-heat adsorption cooling system , 1999 .
[8] S. Mintova,et al. Self-assembled titanosilicate TS-1 nanocrystals in hierarchical structures , 2011 .
[9] Thermochemical storage using composite materials , 2008 .
[10] I. V. Mezentsev,et al. A new approach to regenerating heat and moisture in ventilation systems , 2008 .
[11] S. Huo,et al. Dynamics and isotherms of water vapor sorption on mesoporous silica gels modified by different salts , 2010 .
[12] J. Veselovskaya,et al. Novel ammonia sorbents “porous matrix modified by active salt” for adsorptive heat transformation: 4. Dynamics of quasi-isobaric ammonia sorption and desorption on BaCl2/vermiculite , 2011 .
[13] Y. Kato,et al. Composite material “Mg(OH)2/vermiculite”: A promising new candidate for storage of middle temperature heat , 2012 .
[14] Clive B. Beggs,et al. The use of solar desiccant cooling in the UK: a feasibility study , 2002 .
[15] Ruzhu Wang,et al. Experimental study on an adsorption chiller employing lithium chloride in silica gel and methanol , 2012 .
[16] Giovanni Restuccia,et al. Selective water sorbents for multiple applications, 1. CaCl2 confined in mesopores of silica gel: Sorption properties , 1996 .
[17] G. Cacciola,et al. A family of new working materials for solid sorption air conditioning systems , 2002 .
[18] L. L. Vasiliev,et al. Three adsorbers solar cooler with composite sorbent bed and heat pipe thermal control , 2012 .
[19] Yuri I. Aristov,et al. ARTIC-1: A New Humidity Buffer for Showcases , 2009 .
[20] Shengwei Wang,et al. Numerical analysis and evaluation of an open-type thermal storage system using composite sorbents , 2009 .
[21] A. Lycourghiotis,et al. The Role of the Liquid‐Solid Interface in the Preparation of Supported Catalysts , 2006 .
[22] Limin Qiu,et al. Moisture transport and adsorption on silica gel-calcium chloride composite adsorbents , 2007 .
[23] Ruzhu Wang,et al. Novel composite sorbent for resorption systems and for chemisorption air conditioners driven by low generation temperature , 2009 .
[24] Yuri I. Aristov,et al. Composites "binary salts in porous matrix" for adsorption heat transformation , 2013 .
[25] Shengwei Wang,et al. Effects of impregnating variables on dynamic sorption characteristics and storage properties of composite sorbent for solar heat storage , 2007 .
[26] Yu. I. Aristov,et al. Low temperature heat capacity of the system “silica gel–calcium chloride–water” , 2011 .
[27] Keiko Fujioka,et al. Preparation of Fine Particles of Calcium Chloride with Expanded Graphite for Enhancement of the Driving Reaction for Chemical Heat Pumps , 2003 .
[28] Qun Cui,et al. Environmentally benign working pairs for adsorption refrigeration , 2005 .
[29] Keiko Fujioka,et al. Composite reactants of calcium chloride combined with functional carbon materials for chemical heat pumps , 2008 .
[30] C. Kaps,et al. Calorimetric studies of thermochemical heat storage materials based on mixtures of MgSO4 and MgCl2 , 2010 .
[31] SiO2–LiBr Nanocomposite Sol–Gel Adsorbents of Water Vapor: Preparation and Properties , 1999 .
[32] Li-Xia Pei,et al. Selective adsorption of a novel high selective desiccant for prospective use in heat and moisture recovery for buildings , 2012 .
[33] Sorption of carbon dioxide by the composite sorbent “potassium carbonate in porous matrix” , 2003 .
[34] A. Lebru,et al. Multisalt-carbon chemical cooler for space applications , 1999 .
[35] Yuri I. Aristov,et al. Adsorption chilling driven by low temperature heat: New adsorbent and cycle optimization , 2012 .
[36] Yuri I. Aristov,et al. Adsorption properties of composite materials (LiCl + LiBr)/silica , 2009 .
[37] D. Ackermann,et al. Studies of the water adsorption on Zeolites and modified mesoporous materials for seasonal storage of solar heat , 2004 .
[38] R. E. Critoph,et al. Review of trends in solid sorption refrigeration and heat pumping technology , 2005 .
[39] L. L. Vasiliev,et al. NaX zeolite, carbon fibre and CaCl2 ammonia reactors for heat pumps and refrigerators , 1996 .
[40] S. Iijima. Helical microtubules of graphitic carbon , 1991, Nature.
[41] I. V. Mezentsev,et al. Investigation of the Moisture Exchange in a Stationary Adsorbent Layer Through which Air is Passed , 2005 .
[42] A. Freni,et al. An advanced solid sorption chiller using SWS-1L , 2007 .
[44] F. C. Brown,et al. A Heat Pump and Thermal Storage System for Solar Heating and Cooling Based on the Reaction of Calcium Chloride and Methanol Vapor , 1980 .
[45] E. Fluck,et al. Gmelins Handbuch der anorganischen Chemie , 1936, Nature.
[46] Avelino Corma,et al. From Microporous to Mesoporous Molecular Sieve Materials and Their Use in Catalysis. , 1997, Chemical reviews.
[47] Ruzhu Wang,et al. Theoretical comparison of the refrigerating performances of a CaCl2 impregnated composite adsorbent to those of the host silica gel , 2008 .
[48] Yuri I. Aristov,et al. Effective Inorganic Hybrid Adsorbents of Water Vapor by the Sol−Gel Method , 1997 .
[49] J. Jänchen,et al. Influence of Cycle Temperatures on the Thermochemical Heat Storage Densities in the Systems Water/Microporous and Water/Mesoporous Adsorbents , 2005 .
[50] A. Freni,et al. Composite Sorbent of Methanol “Lithium Chloride in Mesoporous Silica Gel” for Adsorption Cooling Machines: Performance and Stability Evaluation , 2009 .
[51] Li-Zhi Zhang. Fabrication of a lithium chloride solution based composite supported liquid membrane and its moisture permeation analysis , 2005, Journal of Membrane Science.
[52] Yuri I. Aristov,et al. Novel sorbents of ethanol “salt confined to porous matrix” for adsorptive cooling , 2010 .
[54] K. Kaneko,et al. Superhigh surface area determination of microporous solids , 1992 .
[55] Ruzhu Wang,et al. Performance investigation on a novel two-stage solar driven rotary desiccant cooling system using composite desiccant materials , 2010 .
[56] Yuri I. Aristov,et al. Challenging offers of material science for adsorption heat transformation: A review , 2013 .
[57] Ruzhu Wang,et al. Effective thermal conductivity of expanded graphite–CaCl2 composite adsorbent for chemical adsorption chillers , 2006 .
[58] A. Shipovskaya,et al. Liquid-crystal state in the system polysaccharide-mesophasogenic solvent , 2006 .
[59] Nobuyoshi Nakagawa,et al. Preface to the Special Issue , 2007 .
[60] Pierre Neveu,et al. A review of chemical heat pump technology and applications , 2001 .
[61] Bernard Spinner,et al. The structure and performance of single effect solid-gas chemical heat pumps , 1993 .
[62] J. San,et al. Performance of a multi-bed adsorption heat pump using SWS-1L composite adsorbent and water as the working pair , 2009 .
[63] R. T. Yang,et al. Adsorbents: Fundamentals and Applications , 2003 .
[64] Jianlei Niu,et al. Indoor humidity behaviors associated with decoupled cooling in hot and humid climates , 2003 .
[65] Ruzhu Wang,et al. A review on adsorption working pairs for refrigeration , 2009 .
[66] I. S. Glaznev,et al. Kinetics of water adsorption/desorption under isobaric stages of adsorption heat transformers: The effect of isobar shape , 2009 .
[67] Ruzhu Wang,et al. Lithium chloride - Expanded graphite composite sorbent for solar powered ice maker , 2010 .
[68] D. Ackermann,et al. Calorimetric investigation on zeolites, AlPO4's and CaCl2 impregnated attapulgite for thermochemical storage of heat , 2005 .
[69] Shengwei Wang,et al. Experimental study on composite silica gel supported CaCl2 sorbent for low grade heat storage , 2006 .
[70] Yuri I. Aristov,et al. Composites CaCl2/SBA-15 for adsorptive transformation of low temperature heat: Pore size effect , 2011 .
[71] D. Johnston,et al. Chemical heat pumps using a dispersion of a metal salt ammoniate in an inert solvent , 1981 .
[72] Yuri I. Aristov,et al. Selective water sorbents for multiple applications, 8. sorption properties of CaCl2−SiO2 sol-gel composites , 1999 .
[73] R. Carling. Dissociation pressures and enthalpies of reaction in MgCl2 · nH2O and CaCl2 · nNH3☆ , 1981 .
[74] A. Nakajima,et al. Water vapor adsorption of CaCl2-impregnated activated carbon , 2010 .
[75] A. Freni,et al. Composites “lithium halides in silica gel pores”: Methanol sorption equilibrium , 2008 .
[76] Ruzhu Wang,et al. Adsorption Equilibrium of Water on a Composite Adsorbent Employing Lithium Chloride in Silica Gel , 2010 .
[77] Vincent Goetz,et al. A model for reversible solid-gas reactions submitted to temperature and pressure constraints: simulation of the rate of reaction in solid-gas reactor used as chemical heat pump , 1992 .
[78] Ruzhu Wang,et al. Development of a new synthesized adsorbent for refrigeration and air conditioning applications , 2006 .
[79] Yuri I. Aristov,et al. Water sorption on composite ''silica modified by calcium nitrate" , 2009 .
[80] Cai-Hang Liang,et al. Performance analysis of a direct expansion air dehumidification system combined with membrane-based total heat recovery , 2010 .
[81] Yuri I. Aristov,et al. Synthesis and water sorption properties of a new composite “CaCl2 confined into SBA-15 pores” , 2010 .
[82] Lingai Luo,et al. A review on long-term sorption solar energy storage , 2009 .
[83] C. Petit,et al. On the reactive adsorption of ammonia on activated carbons modified by impregnation with inorganic compounds. , 2009, Journal of colloid and interface science.
[84] V. E. Sharonov,et al. Chemical and adsorption heat pumps: Comments on the second law efficiency , 2008 .
[85] Larisa G. Gordeeva,et al. Novel ammonia sorbents ‘‘porous matrix modified by active salt” for adsorptive heat transformation: 6. The ways of adsorption dynamics enhancement , 2012 .
[86] Haijun Chen,et al. Attapulgite based LiCl composite adsorbents for cooling and air conditioning applications , 2008 .
[87] Yury I. Aristov,et al. Novel Materials for Adsorptive Heat Pumping and Storage: Screening and Nanotailoring of Sorption Properties , 2007 .
[88] J. Dahn,et al. Ammonia, cyclohexane, nitrogen and water adsorption capacities of an activated carbon impregnated with increasing amounts of ZnCl(2), and designed to chemisorb gaseous NH(3) from an air stream. , 2008, Journal of colloid and interface science.
[89] Yu. I. Aristov,et al. Universal relation between the boundary temperatures of a basic cycle of sorption heat machines , 2008 .
[90] Yuri I. Aristov,et al. Impact of phase composition on water adsorption on inorganic hybrids "salt/silica". , 2006, Journal of colloid and interface science.
[91] Ruzhu Wang,et al. Experimental comparison of the sorption and refrigerating performances of a CaCl2 impregnated composite adsorbent and those of the host silica gel , 2007 .
[92] Bernard Spinner,et al. Models of heat and mass transfers in solid—gas reactors used as chemical heat pumps , 1990 .
[93] Zine Aidoun,et al. Salt impregnated carbon fibres as the reactive medium in a chemical heat pump: the NH3–CoCl2 system , 2002 .
[94] Ruzhu Wang,et al. Experimental comparison of two honeycombed desiccant wheels fabricated with silica gel and composite desiccant material , 2006 .
[95] Vasily E. Sharonov,et al. Ammonia sorption on composites ‘CaCl2 in inorganic host matrix’: isosteric chart and its performance , 2006 .
[96] R. Ahmad,et al. Surface modification of alumina by metal doping , 2000 .
[97] Ruzhu Wang,et al. Adsorption Characteristic of Methanol in Activated Carbon Impregnated with Lithium Chloride , 2010 .
[98] Francis Meunier,et al. Second-law analysis of adsorptive refrigeration cycles: The role of thermal coupling entropy production , 1997 .
[100] J. Niu,et al. Performance comparisons of desiccant wheels for air dehumidification and enthalpy recovery , 2002 .
[101] Yuri I. Aristov,et al. Experimental testing of a lab-scale adsorption chiller using a novel selective water sorbent “silica modified by calcium nitrate” , 2012 .
[102] Li Yong,et al. Technology development in the solar adsorption refrigeration systems , 2003 .
[103] Belal Dawoud,et al. A hybrid solar-assisted adsorption cooling unit for vaccine storage , 2007 .
[104] Ruzhu Wang,et al. Use of compound desiccant to develop high performance desiccant cooling system , 2007 .
[105] C. Petit,et al. Interactions of ammonia with the surface of microporous carbon impregnated with transition metal chlorides , 2007 .
[106] A. Freni,et al. Influence of Characteristics of Methanol Sorbents “Salts in Mesoporous Silica” on the Performance of Adsorptive Air Conditioning Cycle , 2007 .
[107] Yury Aristov,et al. “Salt in a porous matrix” adsorbents: Design of the phase composition and sorption properties , 2009 .