A new stabilization technique for finite elements in non-linear elasticity

In the present contribution, an innovative stabilization technique for two-dimensional low-order finite elements is presented. The new approach results in an element formulation that is much simpler than the recently proposed enhanced strain element formulation, yet which gives results of at least the same quality. An important feature in the regime of large deformations is the stability of the element, which is addressed in detail. The main advantages of the new formulation are, besides its simplicity, its computational efficiency and robust behaviour. Only three history variables have to be stored, making this stabilization concept particularly interesting for large-scale problems. Copyright © 1999 John Wiley & Sons, Ltd.

[1]  D. Malkus,et al.  Mixed finite element methods—reduced and selective integration techniques: a unification of concepts , 1990 .

[2]  J. C. Rice,et al.  On numerically accurate finite element solutions in the fully plastic range , 1990 .

[3]  J. C. Simo,et al.  A CLASS OF MIXED ASSUMED STRAIN METHODS AND THE METHOD OF INCOMPATIBLE MODES , 1990 .

[4]  Peter Wriggers,et al.  A finite element method for stability problems in finite elasticity , 1995 .

[5]  Ernst Rank,et al.  Adaptive mesh generation and transformation of triangular to quadrilateral meshes , 1993 .

[6]  Peter Wriggers,et al.  Material instabilities of an incompressible elastic cube under triaxial tension , 1997 .

[7]  Peter Wriggers,et al.  A FORMULATION OF THE QS6 ELEMENT FOR LARGE ELASTIC DEFORMATIONS , 1996 .

[8]  J. C. Simo,et al.  Variational and projection methods for the volume constraint in finite deformation elasto-plasticity , 1985 .

[9]  B. D. Reddy,et al.  Some geometrical results and estimates for quadrilateral finite elements , 1995 .

[10]  T. Belytschko,et al.  A uniform strain hexahedron and quadrilateral with orthogonal hourglass control , 1981 .

[11]  T. Belytschko,et al.  Efficient implementation of quadrilaterals with high coarse-mesh accuracy , 1986 .

[12]  Francisco Armero,et al.  On the formulation of enhanced strain finite elements in finite deformations , 1997 .

[13]  J. M. Kennedy,et al.  Hourglass control in linear and nonlinear problems , 1983 .

[14]  E. Wilson,et al.  A non-conforming element for stress analysis , 1976 .

[15]  Howard L. Schreyer,et al.  Eigenvalue analysis of compatible and incompatible rectangular four‐node quadrilateral elements , 1989 .

[16]  B. D. Reddy,et al.  Further results for enhanced strain methods with isoparametric elements , 1995 .

[17]  Peter Wriggers,et al.  A note on enhanced strain methods for large deformations , 1996 .

[18]  J. C. Simo,et al.  Quasi-incompressible finite elasticity in principal stretches. Continuum basis and numerical algorithms , 1991 .

[19]  J. C. Simo,et al.  Stability and convergence of a class of enhanced strain methods , 1995 .

[20]  Peter Wriggers,et al.  Consistent gradient formulation for a stable enhanced strain method for large deformations , 1996 .

[21]  Ekkehard Ramm,et al.  On alternative hybrid stress 2d and 3d elements , 1994 .

[22]  H. Stolarski,et al.  Extrapolated fields in the formulation of the assumed strain elements Part II: Three-dimensional problems , 1995 .

[23]  T. Pian,et al.  Rational approach for assumed stress finite elements , 1984 .

[24]  Peter Wriggers,et al.  A formulation for the 4‐node quadrilateral element , 1995 .

[25]  Robert L. Taylor,et al.  Improved versions of assumed enhanced strain tri-linear elements for 3D finite deformation problems☆ , 1993 .