Vibration Response Evaluation under Shock-Type Loading with Emphasis on Finite Element Model Updating

In some cases, impulse- or shock-type excitations as the dynamic loading are inevitable, and obtaining proper response with the well-known numerical methods is not easy. This paper focuses on dynamic response estimation against short-time loading with an updated finite element model using frequency response functions (FRF) and particle swarm optimization (PSO) technique. Because there is not an analytical method for assessing the numerical responses under shock-type excitations, in this paper, experimental tests are designed on a laboratory scale to evaluate the numerical responses. The vibration responses of the system against shock loading are compared with the Newmark average acceleration scheme and also with experimental data. The results reveal that the unconditionally stable Newmark method against regular loads has an appropriate performance. Still, under short-time loading, it faces numerical damping error, and this method should not be blindly applied under shock-type loads.

[1]  Aldo Sestieri,et al.  COUPLING THEORETICAL DATA AND TRANSLATIONAL FRFS TO PERFORM DISTRIBUTED STRUCTURAL MODIFICATION , 2001 .

[2]  Alireza Rahai,et al.  Structural finite element model updating using transfer function data , 2010 .

[3]  Prediction of the dynamic response of composite sandwich beams under shock loading , 2010 .

[4]  Abbas Karamodin,et al.  A new iterative model updating technique based on least squares minimal residual method using measured modal data , 2016 .

[5]  Rongming Lin,et al.  Finite element model updating using vibration test data under base excitation , 2007 .

[6]  You-Lin Xu,et al.  Inverse substructure method for model updating of structures , 2012 .

[7]  Wei-Xin Ren,et al.  A residual-based Gaussian process model framework for finite element model updating , 2015 .

[8]  Harmesh Kumar,et al.  Structural Dynamic Model Updating Techniques: A State of the Art Review , 2016 .

[9]  Rongming Lin,et al.  Model updating of damped structures using FRF data , 2006 .

[10]  Kong Fah Tee,et al.  Extraction of real modes and physical matrices from modal testing , 2011 .

[11]  C. Papadimitriou,et al.  Structural model updating and prediction variability using Pareto optimal models , 2008 .

[12]  P. D. McFadden,et al.  A review of time-frequency methods for structural vibration analysis , 2003 .

[13]  M. Haddar,et al.  Vibration response of sandwich plate under Low-velocity impact loading , 2011 .

[14]  S. V. Modak,et al.  Normal response function method for mass and stiffness matrix updating using complex FRFs , 2012 .

[15]  Shiqian Chen,et al.  Modal identification of multi-degree-of-freedom structures based on intrinsic chirp component decomposition method , 2019, Applied Mathematics and Mechanics.

[16]  Faramarz Khoshnoudian,et al.  Experimental validation of a FRF-based model updating method , 2018 .

[17]  Vikas Arora,et al.  Comparative study of finite element model updating methods , 2011 .

[18]  Costas Papadimitriou,et al.  Multi-objective optimization algorithms for finite element model updating , 2008 .

[19]  J. Małachowski,et al.  Comparison of numerical testing methods in terms of impulse loading applied to structural elements , 2013 .

[20]  Costas Papadimitriou,et al.  Component mode synthesis techniques for finite element model updating , 2013 .

[21]  L. G. Jaeger,et al.  Dynamics of structures , 1990 .

[22]  Ashutosh Bagchi,et al.  Updating the Mathematical Model of a Structure Using Vibration Data , 2005 .

[23]  Jesse D. Sipple,et al.  Finite element model updating using frequency response functions and numerical sensitivities , 2013 .

[24]  Erin Santini-Bell,et al.  A Two‐Step Model Updating Algorithm for Parameter Identification of Linear Elastic Damped Structures , 2013, Comput. Aided Civ. Infrastructure Eng..

[25]  Claude Brezinski,et al.  Numerical Methods for Engineers and Scientists , 1992 .

[26]  Wei-Ming Li,et al.  New iterative method for model updating based on model reduction , 2011 .

[27]  Piotr Omenzetter,et al.  Particle Swarm Optimization with Sequential Niche Technique for Dynamic Finite Element Model Updating , 2015, Comput. Aided Civ. Infrastructure Eng..

[28]  Kai Ping Yu,et al.  Finite element model updating of damped structures using vibration test data under base excitation , 2015 .

[29]  Timon Rabczuk,et al.  Detection of material interfaces using a regularized level set method in piezoelectric structures , 2016 .

[30]  Vikas Arora,et al.  Finite element model updating with damping identification , 2009 .

[31]  Dae-Sung Jung,et al.  Finite element model updating on small-scale bridge model using the hybrid genetic algorithm , 2013 .

[32]  Timon Rabczuk,et al.  An Energy Approach to the Solution of Partial Differential Equations in Computational Mechanics via Machine Learning: Concepts, Implementation and Applications , 2019, Computer Methods in Applied Mechanics and Engineering.