Internal mechanical conditions in the soft tissues of a residual limb of a trans-tibial amputee.

[1]  Amit Gefen,et al.  Bioengineering Models of Deep Tissue Injury , 2008, Advances in skin & wound care.

[2]  Amit Gefen,et al.  The Effects of Pressure and Shear on Capillary Closure in the Microstructure of Skeletal Muscles , 2007, Annals of Biomedical Engineering.

[3]  Amit Gefen,et al.  The biomechanics of sitting‐acquired pressure ulcers in patients with spinal cord injury or lesions , 2007, International wound journal.

[4]  A Gefen,et al.  Pressure ulcers and deep tissue injury: a bioengineering perspective. , 2007, Journal of wound care.

[5]  Amit Gefen,et al.  Risk factors for a pressure-related deep tissue injury: a theoretical model , 2007, Medical & Biological Engineering & Computing.

[6]  Klaas Nicolay,et al.  Role of ischemia and deformation in the onset of compression-induced deep tissue injury: MRI-based studies in a rat model. , 2007, Journal of applied physiology.

[7]  Y. Itzchak,et al.  Assessment of mechanical conditions in sub-dermal tissues during sitting: a combined experimental-MRI and finite element approach. , 2007, Journal of biomechanics.

[8]  A. Gefen,et al.  Real-Time Patient-Specific Finite Element Analysis of Internal Stresses in the Soft Tissues of a Residual Limb: A New Tool for Prosthetic Fitting , 2006, Annals of Biomedical Engineering.

[9]  Amit Gefen,et al.  Stress relaxation of porcine gluteus muscle subjected to sudden transverse deformation as related to pressure sore modeling. , 2006, Journal of biomechanical engineering.

[10]  J.T. Peery,et al.  A Three-Dimensional Finite Element Model of the Transibial Residual Limb and Prosthetic Socket to Predict Skin Temperatures , 2006, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[11]  D L Bader,et al.  Compression-induced deep tissue injury examined with magnetic resonance imaging and histology. , 2006, Journal of applied physiology.

[12]  D L Bader,et al.  A new MR-compatible loading device to study in vivo muscle damage development in rats due to compressive loading. , 2006, Medical engineering & physics.

[13]  Dr D. P. Reynolds,et al.  Interface load analysis for computer-aided design of below-knee prosthetic sockets , 1992, Medical and Biological Engineering and Computing.

[14]  A. Gefen,et al.  Pressure-time cell death threshold for albino rat skeletal muscles as related to pressure sore biomechanics. , 2006, Journal of biomechanics.

[15]  J. Kulkarni,et al.  Survival rates in dysvascular lower limb amputees. , 2006, International journal of surgery.

[16]  J. Black,et al.  Moving Toward Consensus on Deep Tissue Injury and Pressure Ulcer Staging , 2005, Advances in skin & wound care.

[17]  S G Zachariah,et al.  Changes in interface pressures and shear stresses over time on trans-tibial amputee subjects ambulating with prosthetic limbs: comparison of diurnal and six-month differences. , 2005, Journal of biomechanics.

[18]  P. Niederer,et al.  Strain energy density as a rupture criterion for the kidney: impact tests on porcine organs, finite element simulation, and a baseline comparison between human and porcine tissues. , 2005, Journal of biomechanics.

[19]  D. Berlowitz,et al.  Pressure‐Related Deep Tissue Injury under Intact Skin and the Current Pressure Ulcer Staging Systems , 2005, Advances in skin & wound care.

[20]  Xiaohong Jia,et al.  Finite element modeling of the contact interface between trans-tibial residual limb and prosthetic socket. , 2004, Medical engineering & physics.

[21]  W. Lee,et al.  Load transfer mechanics between trans-tibial prosthetic socket and residual limb--dynamic effects. , 2004, Journal of biomechanics.

[22]  Ergin Tönük,et al.  Nonlinear viscoelastic material property estimation of lower extremity residual limb tissues. , 2004, Journal of biomechanical engineering.

[23]  Cwj Cees Oomens,et al.  A numerical‐experimental method to characterize the non‐linear mechanical behaviour of human skin , 2003, Skin research and technology : official journal of International Society for Bioengineering and the Skin (ISBS) [and] International Society for Digital Imaging of Skin (ISDIS) [and] International Society for Skin Imaging.

[24]  C. Oomens,et al.  The etiology of pressure ulcers: skin deep or muscle bound? , 2003, Archives of physical medicine and rehabilitation.

[25]  J P Paul.  Comparison of computational analysis with clinical measurement of stresses on a below-knee residual limb in a prosthetic socket [Medical Engineering & Physics 22 (2000):607-12]. , 2001, Medical engineering & physics.

[26]  A F Mak,et al.  State-of-the-art research in lower-limb prosthetic biomechanics-socket interface: a review. , 2001, Journal of rehabilitation research and development.

[27]  M. Zhang,et al.  Comparison of computational analysis with clinical measurement of stresses on below-knee residual limb in a prosthetic socket. , 2000, Medical engineering & physics.

[28]  J. Paysant,et al.  Imaging of the painful lower limb stump. , 2000, Radiographics : a review publication of the Radiological Society of North America, Inc.

[29]  S G Zachariah,et al.  Finite element estimates of interface stress in the trans-tibial prosthesis using gap elements are different from those using automated contact. , 2000, Journal of biomechanics.

[30]  E. Zimerson,et al.  Skin disorders in amputees. , 2000, Journal of the American Academy of Dermatology.

[31]  D G Smith,et al.  Socket considerations for the patient with a transtibial amputation. , 1999, Clinical orthopaedics and related research.

[32]  S G Zachariah,et al.  Material properties of commonly-used interface materials and their static coefficients of friction with skin and socks. , 1998, Journal of rehabilitation research and development.

[33]  V. C. Roberts,et al.  Clinical investigation of the pressure and shear stress on the trans-tibial stump with a prosthesis. , 1998, Medical engineering & physics.

[34]  D S Childress,et al.  Parametric analysis using the finite element method to investigate prosthetic interface stresses for persons with trans-tibial amputation. , 1996, Journal of rehabilitation research and development.

[35]  V. C. Roberts,et al.  Development of a non-linear finite element modelling of the below-knee prosthetic socket interface. , 1995, Medical engineering & physics.

[36]  E. Menzel,et al.  Two-dimensional elastic properties of human skin in terms of an incremental model at the in vivo configuration. , 1995, Medical engineering & physics.

[37]  D. Childress,et al.  Normal and shear stresses on a residual limb in a prosthetic socket during ambulation: comparison of finite element results with experimental measurements. , 1993, Journal of rehabilitation research and development.

[38]  H B Skinner,et al.  Analysis of a below-knee patellar tendon-bearing prosthesis: a finite element study. , 1991, Journal of rehabilitation research and development.

[39]  Y Lanir,et al.  In-vivo indentation of human skin. , 1990, Journal of biomechanical engineering.

[40]  G A Ksander,et al.  An In‐Depth Look at Pressure Sores Using Monolithic Silicon Pressure Sensors , 1984, Plastic and reconstructive surgery.

[41]  L. Bennett,et al.  Shear vs pressure as causative factors in skin blood flow occlusion. , 1979, Archives of physical medicine and rehabilitation.

[42]  A. G. James,et al.  Strain energy functions of rubber. I. Characterization of gum vulcanizates , 1975 .