Integration of Host Strain Bioengineering and Bioprocess Development Using Ultra-Scale Down Studies to Select the Optimum Combination: An Antibody Fragment Primary Recovery Case Study

An ultra scale‐down primary recovery sequence was established for a platform E. coli Fab production process. It was used to evaluate the process robustness of various bioengineered strains. Centrifugal discharge in the initial dewatering stage was determined to be the major cause of cell breakage. The ability of cells to resist breakage was dependant on a combination of factors including host strain, vector, and fermentation strategy. Periplasmic extraction studies were conducted in shake flasks and it was demonstrated that key performance parameters such as Fab titre and nucleic acid concentrations were mimicked. The shake flask system also captured particle aggregation effects seen in a large scale stirred vessel, reproducing the fine particle size distribution that impacts the final centrifugal clarification stage. The use of scale‐down primary recovery process sequences can be used to screen a larger number of engineered strains. This can lead to closer integration with and better feedback between strain development, fermentation development, and primary recovery studies. Biotechnol. Bioeng. 2014;111: 1971–1981. © 2014 The Authors. Biotechnology and Bioengineering Published by Wiley Periodicals, Inc.

[1]  Shaukat Ali,et al.  Characterization and feasibility of a miniaturized stirred tank bioreactor to perform E. coli high cell density fed‐batch fermentations , 2012, Biotechnology progress.

[2]  Y. Yamamoto,et al.  Cloning, mapping, and characterization of the Escherichia coli prc gene, which is involved in C-terminal processing of penicillin-binding protein 3 , 1991, Journal of bacteriology.

[3]  Thomas Ephraim Brock,et al.  First International Symposium on Jet Cutting Technology , 1972 .

[4]  Hans Axelsson.  Cell Separation, Centrifugation , 2010 .

[5]  Jochen Büchs,et al.  Hydromechanical stress in shake flasks: Correlation for the maximum local energy dissipation rate , 2006, Biotechnology and bioengineering.

[6]  C. Georgopoulos,et al.  The Escherichia coli dsbC (xprA) gene encodes a periplasmic protein involved in disulfide bond formation. , 1994, The EMBO journal.

[7]  M. Hoare,et al.  Ultra scale‐down studies of the effect of flow and impact conditions during E. coli cell processing , 2006, Biotechnology and bioengineering.

[8]  M. S. Levy,et al.  Framework for the Rapid Optimization of Soluble Protein Expression in Escherichia coli Combining Microscale Experiments and Statistical Experimental Design , 2007, Biotechnology progress.

[9]  Matthew Westoby,et al.  Modeling industrial centrifugation of mammalian cell culture using a capillary based scale‐down system , 2011, Biotechnology and bioengineering.

[10]  Douglas M. Ruthven,et al.  Encyclopedia of separation technology , 1997 .

[11]  R. Sauer,et al.  Tsp: a tail-specific protease that selectively degrades proteins with nonpolar C termini. , 1992, Proceedings of the National Academy of Sciences of the United States of America.

[12]  Charles M. Ambler.  The theory of scaling up laboratory data for the sedimentation type centrifuge , 1959 .

[13]  Jochen Büchs,et al.  Volumetric power consumption in baffled shake flasks , 2006 .

[14]  K. Mita,et al.  Specific codon usage pattern and its implications on the secondary structure of silk fibroin mRNA. , 1988, Journal of molecular biology.

[15]  Frank Hoffmann,et al.  Minimizing inclusion body formation during recombinant protein production in Escherichia coli at bench and pilot plant scale , 2004 .

[16]  B. Glick.  Metabolic load and heterologous gene expression. , 1995, Biotechnology advances.

[17]  Uwe Gottschalk,et al.  Process Scale Purification of Antibodies , 2009 .

[18]  Jessica Y Locke,et al.  Solution NMR structure of the NlpC/P60 domain of lipoprotein Spr from Escherichia coli: structural evidence for a novel cysteine peptidase catalytic triad. , 2008, Biochemistry.

[19]  P Dunnill,et al.  The use of laboratory centrifugation studies to predict performance of industrial machines: studies of shear-insensitive and shear-sensitive materials. , 2000, Biotechnology and bioengineering.

[20]  Mike Hoare,et al.  Characterization of flow intensity in continuous centrifuges for the development of laboratory mimics , 2001 .

[21]  Frank Baganz,et al.  Adapted Ultra Scale‐Down Approach for Predicting the Centrifugal Separation Behavior of High Cell Density Cultures , 2007, Biotechnology progress.

[22]  Michael C. Flickinger,et al.  Encyclopedia of bioprocess technology : fermentation, biocatalysis, and bioseparation , 1999 .

[23]  Patricia Taillandier,et al.  Effect of high shear stress on microbial viability , 2001 .

[24]  Yan Wang,et al.  Chaperone Activity of DsbC* , 1999, The Journal of Biological Chemistry.

[25]  N Hutchinson,et al.  Shear stress analysis of mammalian cell suspensions for prediction of industrial centrifugation and its verification , 2006, Biotechnology and bioengineering.

[26]  Ignacio Tinoco,et al.  Following translation by single ribosomes one codon at a time , 2008, Nature.

[27]  T. Creighton,et al.  Structural and functional characterization of DsbC, a protein involved in disulfide bond formation in Escherichia coli. , 1995, Biochemistry.

[28]  M. Boychyn,et al.  Performance prediction of industrial centrifuges using scale-down models , 2004, Bioprocess and biosystems engineering.

[29]  M. Spitali.  DOWNSTREAM PROCESSING OF MONOCLONAL ANTIBODY FRAGMENTS , 2008 .

[30]  J. van Duin,et al.  Secondary structure of the ribosome binding site determines translational efficiency: a quantitative analysis. , 1990, Proceedings of the National Academy of Sciences of the United States of America.

[31]  Sebastian Mayer,et al.  Correlation of levels of folded recombinant p53 in escherichia coli with thermodynamic stability in vitro. , 2007, Journal of molecular biology.

[32]  Dan S. Tawfik,et al.  Directed evolution of proteins for heterologous expression and stability. , 2005, Current opinion in structural biology.

[33]  F. Baneyx,et al.  Recombinant protein folding and misfolding in Escherichia coli , 2004, Nature Biotechnology.

[34]  D Weuster-Botz,et al.  Experimental design for fermentation media development: statistical design or global random search? , 2000, Journal of bioscience and bioengineering.

[35]  S. Singh,et al.  Solubilization and refolding of bacterial inclusion body proteins. , 2005, Journal of bioscience and bioengineering.

[36]  Fedbatch design for periplasmic product retention in Escherichia coli. , 2008, Journal of biotechnology.