Zonal thermal model of distribution transformer cooling

Abstract The present paper proposes an algebraic zonal model describing the cooling process, via internal oil and external air natural convection, of distribution transformers during a standardised heating test. The conception and adjustment of the presented algebraic zonal model rely on the oil flow and thermal results obtained by a more complex numerical differential model that has been verified and validated by the authors. The domain of the original differential model is divided into several interrelated control volumes or zones where mass and energy conservation laws are applied in conjunction with the necessary boundary conditions. The generated nonlinear algebraic equation system is solved, obtaining in the process the top oil temperature, the internal and external surface temperatures and the heat dissipation distribution. The results of the zonal model have been validated using the previous results from the differential model as well as experimental measurements from heating tests with three different transformers under various power loads. The model developed has proven to be an efficient tool in improving and optimising the thermal design of these devices.

[1]  Ajay K. Prasad,et al.  Vortex-dynamics model for entrainment in jets and plumes , 2000 .

[2]  Leon S. Lasdon,et al.  Design and Testing of a Generalized Reduced Gradient Code for Nonlinear Programming , 1978, TOMS.

[3]  Stephen Tait,et al.  Turbulent entrainment in jets with arbitrary buoyancy , 2005, Journal of Fluid Mechanics.

[4]  Adrian Bejan,et al.  The boundary layer natural convection regime in a rectangular cavity with uniform heat flux from the side , 1984 .

[5]  Eric Van den Bulck,et al.  Modelling of the mixed convection in the windings of a disc-type power transformer , 2000 .

[6]  F. White Viscous Fluid Flow , 1974 .

[7]  Zhengen Ren,et al.  COwZ—A subzonal indoor airflow, temperature and contaminant dispersion model , 2006 .

[8]  Juan Carlos Ramos,et al.  Development of a thermal model for automotive twin-tube shock absorbers , 2005 .

[9]  N. E. Wakil,et al.  Numerical study of heat transfer and fluid flow in a power transformer , 2006 .

[10]  Juan Carlos Ramos,et al.  Numerical modelling of natural convection of oil inside distribution transformers , 2011 .

[11]  Rejane De Césaro Oliveski,et al.  Entropy generation and natural convection in rectangular cavities , 2009 .

[12]  G. Swift,et al.  A fundamental approach to transformer thermal modeling. I. Theory and equivalent circuit , 2001 .

[13]  Derek B. Ingham,et al.  Enhanced numerical model of performance of an encapsulated three-phase transformer in laboratory environment , 2007 .

[14]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[15]  Alejandro Rivas,et al.  Model-based optimisation of Wastewater Treatment Plants design , 2008, Environ. Model. Softw..

[16]  Z. Radaković,et al.  Results of a novel algorithm for the calculation of the characteristic temperatures in power oil transformers , 1997 .

[17]  Y. Langhame,et al.  Effect of oil viscosity on transformer loading capability at low ambient temperatures , 1992 .

[18]  Alejandro Rivas,et al.  The application of spreadsheets to the analysis and optimization of systems and processes in the teaching of hydraulic and thermal engineering , 2006, Comput. Appl. Eng. Educ..

[19]  Jacek Smolka,et al.  Experimental validation of the coupled fluid flow, heat transfer and electromagnetic numerical model of the medium-power dry-type electrical transformer , 2008 .