Journal Bearing: An Integrated CFD-Analytical Approach for the Estimation of the Trajectory and Equilibrium Position

[1]  Pantelis G. Nikolakopoulos,et al.  CFD analysis of journal bearing hydrodynamic lubrication by Bingham lubricant , 2008 .

[2]  Erwin Adi Hartono,et al.  Oil distribution and churning losses of gearboxes: Experimental and numerical analysis , 2020 .

[3]  Franco Concli,et al.  Low-loss gears precision planetary gearboxes: reduction of the load dependent power losses and efficiency estimation through a hybrid analytical-numerical optimization tool , 2017 .

[4]  Hailong Cui,et al.  An ESA‐CFD combined method for dynamic analysis of the aerostatic journal bearing , 2020, Lubrication Science.

[5]  Hua Xu,et al.  Application of Computational Fluid Dynamics and Fluid–Structure Interaction Method to the Lubrication Study of a Rotor–Bearing System , 2010 .

[6]  A. Palazzolo,et al.  Computational Fluid Dynamics Based Mixing Prediction for Tilt Pad Journal Bearing TEHD Modeling—Part I: TEHD-CFD Model Validation and Improvements , 2020 .

[7]  Dimitrios A. Bompos,et al.  CFD simulation of magnetorheological fluid journal bearings , 2011, Simul. Model. Pract. Theory.

[8]  D. Y. Dhande,et al.  Implementation of CFD–FSI Technique Coupled with Response Surface Optimization method for Analysis of Three-Lobe Hydrodynamic Journal Bearing , 2018, Journal of The Institution of Engineers (India): Series C.

[9]  Augusto Della Torre,et al.  Windage Power Losses of Ordinary Gears: Different CFD Approaches Aimed to the Reduction of the Computational Effort , 2014 .

[10]  M B Aitken,et al.  Elastohydrodynamic Lubrication of Big-End Bearings Part 1: Theory , 1991 .

[11]  Dan Jiang,et al.  Numerical analysis of plain journal bearing under hydrodynamic lubrication by water , 2014 .

[12]  F. Concli,et al.  Effect of the static pressure on the power dissipation of gearboxes , 2019, Lubrication Science.

[13]  Franco Concli,et al.  Innovative Meshing Strategies for Bearing Lubrication Simulations , 2020, Lubricants.

[15]  Carlo Gorla,et al.  A CFD ANALYSIS OF THE OIL SQUEEZING POWER LOSSES OF A GEAR PAIR , 2014 .

[16]  Hubert Schwarze,et al.  Investigation of Drag and Churning Losses on Tapered Roller Bearings , 2015 .

[17]  H. Heshmat.  The Mechanism of Cavitation in Hydrodynamic Lubrication , 1991 .

[18]  Carlo Gorla,et al.  Influence Of Lubricant Temperature, Lubricant Level And Rotational Speed On The Churning Power Loss In An Industrial Planetary Speed Reducer: Computational And Experimental Study , 2013 .

[19]  Wei-Mon Yan,et al.  Effects of Nanoparticle Enhanced Lubricant Films in Thermal Design of Plain Journal Bearings at High Reynolds Numbers , 2019, Symmetry.

[20]  Shuo Zhang,et al.  Investigations of the three-dimensional temperature field of journal bearings considering conjugate heat transfer and cavitation , 2019 .

[21]  FRANCO CONCLI,et al.  LUBRICATION OF GEARBOXES: CFD ANALYSIS OF A CYCLOIDAL GEAR SET , 2019, Computational and Experimental Methods in Multiphase and Complex Flow X.

[22]  J. Jamari,et al.  Hydrodynamic Lubrication of Textured Journal Bearing Considering Slippage: Two-dimensional CFD Analysis Using Multiphase Cavitation Model , 2019, Tribology in Industry.

[23]  Giovanni Carabin,et al.  A mixed FEM and lumped-parameter dynamic model for evaluating the modal properties of planetary gearboxes , 2018, Journal of Mechanical Science and Technology.

[24]  Alan Palazzolo,et al.  Computational Fluid Dynamics Based Mixing Prediction for Tilt Pad Journal Bearing TEHD Modeling—Part II: Implementation With Machine Learning , 2020 .

[25]  N. H. Woolley,et al.  Film pressure distribution in water-lubricated rubber journal bearings , 2005 .

[26]  Franco Concli,et al.  Thermal and efficiency characterization of a low-backlash planetary gearbox: An integrated numerical-analytical prediction model and its experimental validation , 2016 .

[27]  Pantelis G. Nikolakopoulos,et al.  Simulation of thermo-hydrodynamic behavior of journal bearings, lubricating with commercial oils of different performance , 2020, Simul. Model. Pract. Theory.

[28]  Franco Concli,et al.  Pressure distribution in small hydrodynamic journal bearings considering cavitation: a numerical approach based on the open‐source CFD code OpenFOAM® , 2016 .

[29]  John Boyd,et al.  A Solution for the Finite Journal Bearing and its Application to Analysis and Design: III , 1958 .

[30]  A. Sanati Nezhad,et al.  Nanofluids for Performance Improvement of Heavy Machinery Journal Bearings: A Simulation Study , 2020, Nanomaterials.

[31]  D. R. Stinebring,et al.  A preconditioned Navier–Stokes method for two-phase flows with application to cavitation prediction , 2000 .

[32]  D. Dowson.  A generalized Reynolds equation for fluid-film lubrication , 1962 .

[33]  M. Schmidt,et al.  Numerical investigation of cavitation flow in journal bearing geometry , 2013 .

[34]  Theo G. Keith,et al.  Development and evaluation of a cavitation algorithm , 1989 .