Application of Optical-Fiber Bragg Grating Sensors in Monitoring the Rail Track Deformations

The lateral flow of ballast during the passage of trains can reduce the stability of rail tracks. Therefore, it is important to monitor and restrain the movement of ballast accordingly in order to prevent track misalignment. This current study explored the use of optical-Fiber Bragg Grating (FBG) sensors to measure the lateral displacement of unreinforced and geogrid-reinforced ballast. The tests were conducted on fresh latite basalt at a loading frequency of 20 Hz and up to 250 000 load cycles. The test results showed that the FBG sensing system is fully capable of measuring the lateral displacement of ballast under high-frequency cyclic loading. A comparison of strains obtained from FBGs installed at different depths along the ballast depth is made and the lateral strain profiles are measured. Moreover, an empirical model to convert the FBG strains to an equivalent lateral displacement of ballast is proposed to effectively use this technology in real-time monitoring of track deformations.

[1]  Michael Iten,et al.  Novel Applications of Distributed Fiber-optic Sensing in Geotechnical Engineering , 2011 .

[2]  Mohamed A. Shahin,et al.  Use of geosynthetics for stabilizing recycled ballast in railway track substructures , 2005 .

[3]  N. NÖTHER,et al.  Displacement Monitoring in Geotechnical Applications Using Optical Fiber Sensors in Geosynthetics , 2012 .

[4]  Katerina Krebber,et al.  Distributed strain measurement with polymer optical fibers integrated into multifunctional geotextiles , 2008, Photonics Europe.

[5]  B. Indraratna,et al.  Advanced Rail Geotechnology – Ballasted Track , 2011 .

[6]  Buddhima Indraratna,et al.  Behaviour of railway ballast under dynamic loads based on large-scale triaxial testing , 2003 .

[7]  L M Le Pen,et al.  Contribution of Base, Crib, and Shoulder Ballast to the Lateral Sliding Resistance of Railway Track: A Geotechnical Perspective , 2011 .

[8]  C. Esveld.  Modern railway track , 1989 .

[9]  K. K. Lee,et al.  Exploration of Using FBG Sensor for Axle Counter in Railway Engineering , 2004 .

[10]  Louis Le Pen,et al.  Track behaviour: the importance of the sleeper to ballast interface , 2008 .

[11]  Jianhua Yin,et al.  Monitoring and analysis of internal displacements of a slope and relationship with rainfall infiltration , 2011 .

[12]  Gerald P Raymond,et al.  Repeated-load response of aggregates in relation to track quality index , 1994 .

[13]  Christine Connolly.  Fibre‐optic‐based sensors bring new capabilities to structural monitoring , 2006 .

[14]  Buddhima Indraratna,et al.  On The Shear Behavior of Ballast-Geosynthetic Interfaces , 2012 .

[15]  M. Baessler,et al.  Track Settlement Due to Cyclic Loading with Low Minimum Pressure and Vibrations , 2003 .

[16]  B. Indraratna,et al.  Effect of confining pressure on ballast degradation and deformation under cyclic triaxial loading , 2007 .

[17]  Syed Khaja Karimullah Hussaini,et al.  The lateral displacement response of geogrid-reinforced ballast under cyclic loading , 2013 .

[18]  Cornelia Schmidt-Hattenberger,et al.  Strain measurements by fiber Bragg grating sensors for in situ pile loading tests , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[19]  Nick Thom,et al.  Discrete element modelling of cyclic loads of geogrid-reinforced ballast under confined and unconfined conditions , 2012 .

[20]  G. McDowell,et al.  Cyclic loading of railway ballast under triaxial conditions and in a railway test facility , 2009 .

[21]  Sai Shankar Madhuvarasu,et al.  Fiber Bragg grating-based high temperature sensor and its low cost interrogation system with enhanced resolution , 2014 .

[22]  Nezih Mrad,et al.  Fiber Optic Sensors for Structural Health Monitoring of Air Platforms , 2011, Sensors.

[23]  R. Kerry Rowe,et al.  Geotextile strain in a full scale reinforced test embankment , 1994 .

[24]  Honghu Zhu.  Fiber optic monitoring and performance evaluation of geotechnical structures , 2009 .

[25]  Rodrigo Salgado,et al.  Measurement of pile load transfer using the Fiber Bragg Grating sensor system , 2004 .

[26]  Ernest T. Selig,et al.  Track Geotechnology and Substructure Management , 1995 .

[27]  R. Measures.  Structural Monitoring with Fibre Optic Technology , 2001 .

[28]  An-Bin Huang,et al.  Development of a fibre Bragg grating sensored ground movement monitoring system , 2006 .

[29]  Jungseok Kim,et al.  Longitudinal strain monitoring of rail using a distributed fiber sensor based on Brillouin optical correlation domain analysis , 2011 .

[30]  Syed Khaja Karimullah Hussaini.  An experimental study on the deformation behaviour of geosynthetically reinforced ballast , 2013 .

[31]  B. Indraratna,et al.  Field Assessment of the Performance of a Ballasted Rail Track with and without Geosynthetics , 2010 .

[32]  Wei Wang,et al.  Influence of differential settlement on pavement structure of widened roads based on large-scale model test , 2011 .

[33]  Gerrit Dortland,et al.  Geotextile Enabled Smart Monitoring Solutions for Safe and Effective Management of Tailings and Waste Sites Two case studies: Volgermeerpolder (The Netherlands) and Suncor (Canada)" , 2011 .

[34]  Stephen J. Mihailov,et al.  Fiber Bragg Grating Sensors for Harsh Environments , 2012, Sensors.