Integration and electrical properties of diffusion barrier for high density ferroelectric memory

A reliable Ir diffusion barrier was prepared on polysilicon plugged substrate with a contact size of 0.6 μm. Using a Ti adhesion layer and stress-relief process, it was possible to integrate the Ir barrier into a high density 4 Mb ferroelectric random access memory device. After heat treating sol-gel derived Pb(Zr1−xTix)O3 (PZT) films at 700 °C, the Ir barrier contact displayed an ohmic behavior and showed a low resistance of 130 Ω per contact in 1k serial contact array. The PZT films on Pt/IrO2/Ir poly-plugged substrate exhibited excellent ferroelectric properties such as remnant polarization and coercive voltage of 25 μC/cm2 and 1.15 V, respectively. Auger depth profile and transmission electron microscopy analyses confirmed that no appreciable oxidation was formed between the Ir barrier and the polysilicon plug.