Behavior of multiphase induction machines with unbalanced stator windings
暂无分享,去创建一个
Y. Gritli | D. Casadei | A. Tani | G. Serra | F. Filippetti | M. Mengoni | L. Zarri | F. Filippetti | D. Casadei | G. Serra | A. Tani | M. Mengoni | L. Zarri | Y. Gritli
[1] John E. Fletcher,et al. Current Optimization for a Multi-Phase Machine under an Open Circuit Phase Fault Condition , 2006 .
[2] D. Casadei,et al. Optimal fault-tolerant control strategy for multi-phase motor drives under an open circuit phase fault condition , 2008, 2008 18th International Conference on Electrical Machines.
[3] Thomas A. Lipo,et al. Disturbance free operation of a multiphase current regulated motor drive with an opened phase , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.
[4] C.B. Jacobina,et al. Fault tolerant control of five-phase AC motor drive , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).
[5] Jintae Cho,et al. On-line Detection of High-Resistance Connections in the Incoming Electrical Circuit for Induction Motors , 2007, 2007 IEEE International Electric Machines & Drives Conference.
[6] Jintae Cho,et al. On-line Detection of High-Resistance Connections in the Incoming Electrical Circuit for Induction Motors , 2007, IEMDC 2007.
[7] D. White,et al. Electromechanical energy conversion , 1959 .
[8] Xavier Kestelyn,et al. High Order Sliding mode optimal current control of five phase permanent magnet motor under open circuited phase fault conditions , 2010, 2010 IEEE Vehicle Power and Propulsion Conference.
[9] D. Casadei,et al. Comparison of different fault-tolerant control strategies for seven-phase induction motor drives , 2009, 2009 13th European Conference on Power Electronics and Applications.
[10] Seung-Ki Sul,et al. Synchronous-frame current control of multiphase synchronous motor under asymmetric fault condition due to open phases , 2004, IEEE Transactions on Industry Applications.
[11] Lee Empringham,et al. Multiphase Power Converter Drive for Fault-Tolerant Machine Development in Aerospace Applications , 2010, IEEE Transactions on Industrial Electronics.
[12] L. Parsa,et al. On advantages of multi-phase machines , 2005, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005..
[13] Gérard-André Capolino,et al. Modeling and Control of Six-Phase Symmetrical Induction Machine Under Fault Condition Due to Open Phases , 2008, IEEE Transactions on Industrial Electronics.
[14] H.A. Toliyat,et al. Fault-tolerant five-phase permanent magnet motor drives , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..
[15] Fabrice Locment,et al. Vectorial Approach-Based Control of a Seven-Phase Axial Flux Machine Designed for Fault Operation , 2008, IEEE Transactions on Industrial Electronics.
[16] Leila Parsa,et al. Fault-Tolerant Control of Five-Phase Permanent-Magnet Motors With Trapezoidal Back EMF , 2011, IEEE Transactions on Industrial Electronics.
[17] H. Toliyat,et al. Five-phase permanent-magnet motor drives , 2005, IEEE Transactions on Industry Applications.
[18] M.T. Abolhassani,et al. A novel multiphase fault tolerant high torque density permanent magnet motor drive for traction application , 2005, IEEE International Conference on Electric Machines and Drives, 2005..
[19] Dong Liu,et al. Strategies for the fault-tolerant current control of a multiphase machine under open phase conditions , 2009, 2009 International Conference on Electrical Machines and Systems.
[20] Sang Bin Lee,et al. Detection and Classification of Stator Turn Faults and High Resistance Electrical Connections for Induction Machines , 2007, 2007 IEEE Industry Applications Annual Meeting.
[21] Leila Parsa,et al. An Optimal Control Technique for Multiphase PM Machines Under Open-Circuit Faults , 2008, IEEE Transactions on Industrial Electronics.
[22] Haitham Abu-Rub,et al. Five‐Phase Induction Motor Drive System , 2012, High Performance Control of AC Drives with MATLAB®/Simulink.
[23] N. Bianchi,et al. Design of a fault-tolerant IPM motor for electric power steering , 2006, IEEE Transactions on Vehicular Technology.
[24] Gérard-André Capolino,et al. Advances in Diagnostic Techniques for Induction Machines , 2008, IEEE Transactions on Industrial Electronics.
[25] N. Bianchi,et al. Strategies for the Fault-Tolerant Current Control of a Five-Phase Permanent-Magnet Motor , 2007, IEEE Transactions on Industry Applications.
[26] Y. Zhao,et al. Modeling and control of a multi-phase induction machine with structural unbalance , 1996 .
[27] H.A. Toliyat,et al. Operating principles of a novel multiphase multimotor vector-controlled drive , 2004, IEEE Transactions on Energy Conversion.
[28] H.A. Toliyat,et al. A novel concept of a multiphase, multimotor vector controlled drive system supplied from a single voltage source inverter , 2004, IEEE Transactions on Power Electronics.
[29] Johan Gyselinck,et al. An on-line method for stator fault detection in multi-phase PMSM drives , 2010, 2010 IEEE Vehicle Power and Propulsion Conference.