Quasi-parallel switched-capacitor and regulating PWM DC-DC converter

Datacenter power consumption makes up two percent of United States electricity consumption or 80TWhr. Roughly half of this energy is spent on cooling or lost in power conversion. Further as datacenters try to maximize compaction, the need for small and highly efficient power supplies is highlighted. Telecom power supplies often rely on large and lossy transformers to achieve large conversion ratios or to provide isolation for Quasi-Parallel or Sigma configurations. Low power switched capacitors converters can eliminate the large magnetic components and even provide ground isolation. Switched capacitor converters suffer from poor load regulation, poor line regulation, and discontinuous conversion ratios. Using a multilevel modular switched capacitor converter in a quasiparallel structure, a lesser power rated regulating converter can provide load regulation and line regulation. This configuration can provide lightweight, efficient, and magnetic-less power.

[1]  D.J. Perreault,et al.  New architectures for radio-frequency DC/DC power conversion , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[2]  Siew-Chong Tan,et al.  On Energy Efficiency of Switched-Capacitor Converters , 2013, IEEE Transactions on Power Electronics.

[3]  F.C. Lee,et al.  Σ/sigma DC/DC conversion for computing and telecom applications , 2008, 2008 IEEE Power Electronics Specialists Conference.

[4]  J. Koomey Worldwide electricity used in data centers , 2008 .

[5]  Jin Wang,et al.  Recent developments on high-power switched-capacitor converters , 2012, 2012 IEEE Power and Energy Conference at Illinois.

[6]  L.M. Tolbert,et al.  5 kW Multilevel DC-DC Converter for Hybrid Electric and Fuel Cell Automotive Applications , 2007, 2007 IEEE Industry Applications Annual Meeting.

[7]  V. Agarwal,et al.  On the Input Resistance of a Reconfigurable Switched Capacitor DC–DC Converter-Based Maximum Power Point Tracker of a Photovoltaic Source , 2012, IEEE Transactions on Power Electronics.

[8]  C. Bunlaksananusorn,et al.  Modeling and control of a Zeta converter , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[9]  Michael D. Seeman,et al.  Analysis and Optimization of Switched-Capacitor DC–DC Converters , 2008 .

[10]  M. K. Alam,et al.  A high-efficiency modular switched-capacitor converter with continuously variable conversion ratio , 2012, 2012 IEEE 13th Workshop on Control and Modeling for Power Electronics (COMPEL).

[11]  N Femia,et al.  Stability Issues in Peak-Current-Controlled SEPIC , 2011, IEEE Transactions on Power Electronics.

[12]  Fang Zheng Peng,et al.  Zero-current-switching multilevel modular switched-capacitor dc-dc converter , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[13]  APEC 2000 - Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition , 2000, APEC 2000. Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.00CH37058).

[14]  F.C. Lee,et al.  High efficiency quasi-parallel Voltage Regulators , 2008, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition.

[15]  C.E. Bash,et al.  Smart chip, system and data center enabled by advanced flexible cooling resources , 2005, Semiconductor Thermal Measurement and Management IEEE Twenty First Annual IEEE Symposium, 2005..

[16]  Mummadi Veerachary Control of TI-SEPIC converter for optimal utilization of PV power , 2011, India International Conference on Power Electronics 2010 (IICPE2010).

[17]  Fan Zhang,et al.  A New Design Method for High-Power High-Efficiency Switched-Capacitor DC–DC Converters , 2008, IEEE Transactions on Power Electronics.

[18]  K. Nishijima,et al.  High efficiency operation for H-Bridge DC-DC converter , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[19]  Shuai Jiang,et al.  Optimal design of multilevel modular switched-capacitor dc-dc converter , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[20]  Leon M. Tolbert,et al.  Development of a 55 kW 3X dc-dc converter for HEV systems , 2009, 2009 IEEE Vehicle Power and Propulsion Conference.

[21]  Fang Zheng Peng,et al.  Multiphase Multilevel Modular DC–DC Converter for High-Current High-Gain TEG Application , 2010, IEEE Transactions on Industry Applications.

[22]  A. Pratt,et al.  Evaluation of 400V DC distribution in telco and data centers to improve energy efficiency , 2007, INTELEC 07 - 29th International Telecommunications Energy Conference.

[23]  A. Ioinovici,et al.  Switched-capacitor power electronics circuits , 2001 .

[24]  L. K. Wong,et al.  Small signal modelling of open-loop SEPIC converters , 2010 .

[25]  Terukazu Sato,et al.  H-bridge buck-boost converter with dual feedforward control , 2009, 2009 International Conference on Power Electronics and Drive Systems (PEDS).

[26]  D.J. Perreault,et al.  New Architectures for Radio-Frequency DC – DC Power Conversion , 2006 .

[27]  Vivek Agarwal,et al.  Analysis and design of a ground isolated switched capacitor DC-DC converter , 2010, 2010 IEEE International Symposium on Industrial Electronics.

[28]  Cullen E. Bash,et al.  Smart cooling of data centers , 2003 .

[29]  D.J. Perreault,et al.  Merged two-stage power converterarchitecture with softcharging switched-capacitor energy transfer , 2008, 2008 IEEE Power Electronics Specialists Conference.