In situ growth of Ca-Zn-P coatings on the Zn-pretreated WE43 Mg alloy to mitigate corrosion and enhance cytocompatibility.

[1]  Jun Yu Li,et al.  Calcium phosphate coating on biomedical WE43 magnesium alloy pretreated with a magnesium phosphate layer for corrosion protection , 2020 .

[2]  A. Padalhin,et al.  In-vitro and in-vivo evaluation of strontium doped calcium phosphate coatings on biodegradable magnesium alloy for bone applications , 2020 .

[3]  Yufeng Zheng,et al.  In vitro and in vivo studies of Zn-Mn biodegradable metals designed for orthopedic applications. , 2020, Acta biomaterialia.

[4]  C. Gu,et al.  Advances in coatings on biodegradable magnesium alloys , 2020 .

[5]  R. B. Soares,et al.  Corrosion behavior of magnetron sputtered NbN and Nb1-xAlxN coatings on AISI 316L stainless steel , 2019, Surface and Coatings Technology.

[6]  D. Seifzadeh,et al.  Application of novel sol–gel composites on magnesium alloy , 2019, Journal of Magnesium and Alloys.

[7]  X. Jing,et al.  Effect of phosphate additive on the morphology and anti-corrosion performance of plasma electrolytic oxidation coatings on magnesium―lithium alloy , 2019, Corrosion Science.

[8]  Ke Yang,et al.  Improvement of biodegradable and antibacterial properties by solution treatment and micro-arc oxidation (MAO) of a magnesium alloy with a trace of copper , 2019, Corrosion Science.

[9]  Shu Cai,et al.  Effect of alkali/acid pretreatment on the topography and corrosion resistance of as-deposited CaP coating on magnesium alloys , 2019, Journal of Alloys and Compounds.

[10]  H. Breitinger,et al.  Study of the degradation behavior and the biocompatibility of Mg–0.8Ca alloy for orthopedic implant applications , 2019, Journal of Magnesium and Alloys.

[11]  Yufeng Zheng,et al.  Biofunctionalization of metallic implants by calcium phosphate coatings , 2019, Bioactive materials.

[12]  M. P. Gomes,et al.  On the corrosion mechanism of Mg investigated by electrochemical impedance spectroscopy , 2019, Electrochimica Acta.

[13]  D. N. Rocha,et al.  Bioactivity of strontium-monetite coatings for biomedical applications , 2019, Ceramics International.

[14]  M. Dargusch,et al.  The influence of alloying and fabrication techniques on the mechanical properties, biodegradability and biocompatibility of zinc: A comprehensive review. , 2019, Acta biomaterialia.

[15]  Ping Liu,et al.  Corrosion resistance of bioinspired DNA-induced Ca–P coating on biodegradable magnesium alloy , 2019, Journal of Magnesium and Alloys.

[16]  Qingyang Li,et al.  Enhanced corrosion and wear resistance of AZ31 magnesium alloy in simulated body fluid via electrodeposition of nanocrystalline zinc , 2018, Materialia.

[17]  F. Witte,et al.  Biodegradable Metals , 2018, Biomaterials Science.

[18]  D. N. Rocha,et al.  Kinetics of conversion of brushite coatings to hydroxyapatite in alkaline solution , 2018, Journal of Materials Research and Technology.

[19]  R. Wu,et al.  Recent developments in high-strength Mg-RE-based alloys: Focusing on Mg-Gd and Mg-Y systems , 2018, Journal of Magnesium and Alloys.

[20]  R. Kavitha,et al.  Deposition of strontium phosphate coatings on magnesium by hydrothermal treatment: Characteristics, corrosion resistance and bioactivity , 2018 .

[21]  J. Drelich,et al.  Zinc-based alloys for degradable vascular stent applications. , 2018, Acta biomaterialia.

[22]  S. Omanovic,et al.  Corrosion behaviour of polypyrrole-coated WE43 Mg alloy in a modified simulated body fluid solution , 2018 .

[23]  Yanlin Wang,et al.  Design and fabrication of enhanced corrosion resistance Zn-Al layered double hydroxides films based anion-exchange mechanism on magnesium alloys , 2017 .

[24]  E. Han,et al.  Corrosion resistance of a self-healing micro-arc oxidation/polymethyltrimethoxysilane composite coating on magnesium alloy AZ31 , 2017 .

[25]  Kyung-Hee Park,et al.  Hydrothermal fabrication and characterization of calcium phosphate anhydrous/chitosan composites , 2017 .

[26]  S. M. Ahmadi,et al.  One-step and low-temperature synthesis of monetite nanoparticles in an all-in-one system (reactant, solvent, and template) based on calcium chloride-choline chloride deep eutectic medium , 2017 .

[27]  Yufeng Zheng,et al.  Design of magnesium alloys with controllable degradation for biomedical implants: From bulk to surface. , 2016, Acta biomaterialia.

[28]  M. Maitz,et al.  Comparative corrosion behavior of Zn with Fe and Mg in the course of immersion degradation in phosphate buffered saline , 2016 .

[29]  Peng Tian,et al.  Mussel-inspired functionalization of PEO/PCL composite coating on a biodegradable AZ31 magnesium alloy. , 2016, Colloids and surfaces. B, Biointerfaces.

[30]  P. Chu,et al.  Improvement of corrosion resistance and biocompatibility of rare-earth WE43 magnesium alloy by neodymium self-ion implantation , 2015 .

[31]  S. Yeap,et al.  Cytotoxicity evaluation of biodegradable Zn-3Mg alloy toward normal human osteoblast cells. , 2015, Materials science & engineering. C, Materials for biological applications.

[32]  F. Foschi,et al.  Bonding ability of experimental resin-based materials containing (ion-releasing)-microfillers applied on water-wet or ethanol-wet root canal dentine , 2014 .

[33]  C. Sfeir,et al.  Magnesium ion stimulation of bone marrow stromal cells enhances osteogenic activity, simulating the effect of magnesium alloy degradation. , 2014, Acta biomaterialia.

[34]  S. Carvalho,et al.  Structural and electrochemical characterization of Zr–C–N–Ag coatings deposited by DC dual magnetron sputtering , 2014 .

[35]  E. Brès,et al.  XRD and FTIR crystallinity indices in sound human tooth enamel and synthetic hydroxyapatite. , 2013, Materials science & engineering. C, Materials for biological applications.

[36]  G. Song,et al.  Corrosion behaviour in salt spray and in 3.5 % NaCl solution saturated with Mg(OH)2 of as-cast and solution heat-treated binary Mg-RE alloys: RE = Ce, La, Nd, Y, Gd , 2013 .

[37]  Wei Liu,et al.  Formation of dicalcium phosphate dihydrate on magnesium alloy by micro-arc oxidation coupled with hydrothermal treatment , 2013 .

[38]  A R Boccaccini,et al.  Biomedical coatings on magnesium alloys - a review. , 2012, Acta biomaterialia.

[39]  Guosong Wu,et al.  Improved corrosion resistance and cytocompatibility of magnesium alloy by two-stage cooling in thermal treatment , 2012 .

[40]  J. Rauch,et al.  Comparison of corrosion behaviour of zinc in NaCl and in NaOH solutions. Part I: Corrosion layer characterization , 2010 .

[41]  M. Fathi,et al.  Microstructure, mechanical properties and bio-corrosion evaluation of biodegradable AZ91-FA nanocomposites for biomedical applications , 2010 .

[42]  M. Yamaguchi.  Role of nutritional zinc in the prevention of osteoporosis , 2010, Molecular and Cellular Biochemistry.

[43]  G. Tang,et al.  Corrosion products on biomedical magnesium alloy soaked in simulated body fluids , 2009 .

[44]  U Gbureck,et al.  Cytocompatibility of brushite and monetite cell culture scaffolds made by three-dimensional powder printing. , 2009, Acta biomaterialia.

[45]  G. H. Nancollas,et al.  Calcium orthophosphates: crystallization and dissolution. , 2008, Chemical reviews.

[46]  J. Gavarri,et al.  Study of Protonic Mobility in CaHPO4·2H2O (Brushite) and CaHPO4(Monetite) by Infrared Spectroscopy and Neutron Scattering☆ , 1997 .

[47]  Xiuzhou Lin,et al.  Fabrication and corrosion resistance of a hydrophobic micro-arc oxidation coating on AZ31 Mg alloy , 2015 .

[48]  E. Tanaka,et al.  Fabrications of zinc-releasing biocement combining zinc calcium phosphate to calcium phosphate cement. , 2014, Journal of the mechanical behavior of biomedical materials.

[49]  G. Dias,et al.  Calcium phosphate coatings on magnesium alloys for biomedical applications: a review. , 2012, Acta biomaterialia.

[50]  Guohua Wu,et al.  Electrodeposition of chemically and mechanically protective Al-coatings on AZ91D Mg alloy , 2011 .