Multimode-pumped Raman amplification of a higher order mode in a large mode area fiber.

We report the first demonstration of Raman amplification in a fiber of a single Bessel-like higher order mode using a multimode pump source. We amplify the LP08-mode with a 559-µm2 effective mode area at a signal wavelength of 1115 nm in a pure-silica-core step-index fiber. A maximum of 18 dB average power gain is achieved in a 9-m long gain fiber, with output pulse energy of 115 µJ. The Raman pump source comprises a pulsed 1060 nm ytterbium-doped fiber amplifier with V-value ~30, which is matched to the Raman gain fiber. The pump depletion as averaged over the signal pulses reaches 36.7%. The conversion of power from the multimode pump into the signal mode demonstrates the potential for efficient brightness enhancement with low amplification-induced signal mode purity degradation.

[1]  S. Ramachandran,et al.  Dispersion-tailored few-mode fibers: a versatile platform for in-fiber photonic devices , 2005, Journal of Lightwave Technology.

[2]  David J. Richardson,et al.  High power fiber lasers: current status and future perspectives [Invited] , 2010 .

[3]  C. R. Giles,et al.  Modeling erbium-doped fiber amplifiers , 1991 .

[4]  Zuyuan He,et al.  Second-order few-mode Raman amplifier for mode-division multiplexed optical communication systems. , 2017, Optics express.

[5]  Liang Dong,et al.  Extending Effective Area of Fundamental Mode in Optical Fibers , 2009, Journal of Lightwave Technology.

[6]  Siddharth Ramachandran,et al.  Natural bend-distortion immunity of higher-order-mode large-mode-area fibers. , 2007, Optics letters.

[7]  J W Nicholson,et al.  Light propagation with ultralarge modal areas in optical fibers. , 2006, Optics letters.

[8]  C. Codemard,et al.  Tandem Cladding-Pumping for Control of Excess Gain in Ytterbium-Doped Fiber Amplifiers , 2010, IEEE Journal of Quantum Electronics.

[9]  Christophe A. Codemard,et al.  Design, performance, and limitations of fibers for cladding-pumped Raman lasers , 2011, IEEE Winter Topicals 2011.

[10]  M. Ibsen,et al.  Analysis of the Conversion to the First Stokes in Cladding-Pumped Fiber Raman Amplifiers , 2009, IEEE Journal of Selected Topics in Quantum Electronics.

[11]  R. Stolen,et al.  Parametric amplification and frequency conversion in optical fibers , 1982 .

[12]  R. Stolen,et al.  Raman gain in glass optical waveguides , 1973 .

[13]  N. K. Fontaine,et al.  Distributed Raman amplification based transmission over 1050-km few-mode fiber , 2015, 2015 European Conference on Optical Communication (ECOC).

[14]  S Ramachandran,et al.  Orbital angular momentum beam excitation using an all-fiber weakly fused mode selective coupler. , 2017, Optics letters.

[15]  Knight,et al.  Single-Mode Photonic Band Gap Guidance of Light in Air. , 1999, Science.

[16]  Y. Jeong,et al.  Ytterbium-doped large-core fiber laser with 1.36 kW continuous-wave output power. , 2004, Optics express.

[17]  F. Capasso,et al.  Coupled‐mode theory of Raman amplification in lossless optical fibers , 1976 .

[18]  Jeff Demas,et al.  Free-space beam shaping for precise control and conversion of modes in optical fiber. , 2015, Optics express.

[19]  T. A. Wiggins,et al.  Production and uses of diffractionless beams , 1991 .

[20]  J W Nicholson,et al.  A higher-order-mode erbium-doped-fiber amplifier. , 2010, Optics express.

[21]  A. DeSantolo,et al.  A higher-order mode fiber amplifier with an axicon for output mode conversion , 2015, Photonics West - Lasers and Applications in Science and Engineering.

[22]  S. Ramachandran,et al.  Polymer-clad silica fibers for tailoring modal area and dispersion. , 2016, Optics letters.

[23]  J K Sahu,et al.  Extending single mode performance of all-solid large-mode-area single trench fiber. , 2014, Optics express.