Architecture of a remote impedance-based structural health monitoring system for aircraft applications

The essence of structural health monitoring (SHM) is to develop systems based on nondestructive inspection (NDI) technologies for continuous monitoring, inspection and detection of structural damages. A new architecture of a remote SHM system based on Electromechanical Impedance (EMI) measures is described in the present contribution. The proposed environment is employed to automatically monitor the structural integrity of aircrafts and is composed by sensor networks, a signal conditioning system, a data acquisition hardware and a data processing system. The obtained results allow the accomplishment of structural condition-based maintenance strategies, in opposite to those based only on the usage time of the equipment. This approach increases the operational capacity of the structure without compromising the security of the flights. As the environment continually checks for the first signs of damage, possibly reducing or eliminating scheduled aircraft inspections, it could significantly decrease maintenance and repair expenses. Furthermore, the usage of this system allows the creation of a historical database of the aircrafts structural integrity, making possible the incremental development of a Damage Prognosis System (DPS). This work presents the proposed architecture and a set of experiments that were conducted in a representative aircraft structure (aircraft window) to demonstrate the effectiveness of the proposed system.

[1]  Daniel J. Inman,et al.  Influence of Excitation Signal on Impedance-based Structural Health Monitoring , 2010 .

[2]  Gary Cloud,et al.  The application of interferometric techniques to the nondestructive inspection of fiber-reinforced materials , 1993 .

[3]  L. D. Mitchell,et al.  Variations in Structural Dynamic Characteristics Caused by Changes in Ambient Temperature: I. Experimental , 1996 .

[4]  Victor Giurgiutiu,et al.  Damage Detection in Thin Plates and Aerospace Structures with the Electro-Mechanical Impedance Method , 2005 .

[5]  Craig A. Rogers,et al.  Local-area health monitoring of aircraft via piezoelectric actuator/sensor patches , 1995, Smart Structures.

[6]  Valder Steffen,et al.  A low-cost electromechanical impedance-based SHM architecture for multiplexed piezoceramic actuators , 2011 .

[7]  José Viterbo Filho,et al.  A New Impedance Measurement System for PZT-Based Structural Health Monitoring , 2009, IEEE Transactions on Instrumentation and Measurement.

[8]  C. Liang,et al.  Truss Structure Integrity Identification Using PZT Sensor-Actuator , 1995 .

[9]  Vinod Raju,et al.  Implementing Impedance - Based Health Monitoring , 1997 .

[10]  Victor Giurgiutiu,et al.  Experimental Investigation of E/M Impedance Health Monitoring for Spot-Welded Structural Joints , 1999 .

[11]  Daniel J. Inman,et al.  A study on the correlation between PZT and MFC resonance peaks and damage detection frequency intervals using the impedance method , 2006 .

[12]  Yaowen Yang,et al.  Practical issues related to the application of the electromechanical impedance technique in the structural health monitoring of civil structures: I. Experiment , 2008 .

[13]  Valder Steffen,et al.  Impedance-based Health Monitoring for Aeronautic Structures using Statistical Meta-modeling , 2006 .

[14]  Daniel J. Inman,et al.  Improving Accessibility of the Impedance-Based Structural Health Monitoring Method , 2004 .

[15]  Craig A. Rogers,et al.  High-frequency impedance analysis for NDE of complex precision parts , 1996, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.