Fabrication of PMMA microfluidic chips using disposable agar hydrogel templates

A novel method based on disposable agar hydrogel temples have been developed for the fabrication of PMMA microfluidic chips. Molten agar hydrogel was sandwiched between a glass plate and a PMMA template bearing negative relief of microstructure. After cooling, the negative PMMA template could be easily separated from the solidified agar hydrogel and a layer of agar hydrogel temple bearing high‐fidelity positive relief of the microstructure was left on the glass plate. Prepolymerized methyl methacrylate molding solution containing ultraviolet‐initiator was subsequently sandwiched between the agar hydrogel template and a PMMA plate and was allowed to polymerize under ultraviolet light to fabricate the PMMA channel plate at room temperature. Complete microchips could be obtained by bonding the channel plates with covers. The prepared microfluidic microchips have been successfully employed in the electrophoresis separation and detection of several ions in connection with contactless conductivity detection.

[1]  Yunhua Gao,et al.  Fabrication and characterization of poly(methyl methacrylate) microchannels by in situ polymerization with a novel metal template , 2003, Electrophoresis.

[2]  R. Zare,et al.  Current-monitoring method for measuring the electroosmotic flow rate in capillary zone electrophoresis , 1988 .

[3]  J. Klose,et al.  Two‐dimensional electrophoresis of membrane and cytosol proteins of mouse liver and brain , 1981 .

[4]  Gang Chen,et al.  Fabrication of poly(methyl methacrylate) microfluidic chips by atmospheric molding. , 2004, Analytical chemistry.

[5]  R. McCormick,et al.  Microchannel electrophoretic separations of DNA in injection-molded plastic substrates. , 1997, Analytical chemistry.

[6]  J. Rossier,et al.  UV Laser Machined Polymer Substrates for the Development of Microdiagnostic Systems. , 1997, Analytical chemistry.

[7]  Joseph Wang,et al.  Fabrication of poly(methyl methacrylate) capillary electrophoresis microchips by in situ surface polymerization. , 2006, Lab on a chip.

[8]  D. J. Harrison,et al.  Capillary electrophoresis and sample injection systems integrated on a planar glass chip , 1992 .

[9]  Ford,et al.  Polymeric microelectromechanical systems , 2000, Analytical chemistry.

[10]  C Gärtner,et al.  Polymer microfabrication methods for microfluidic analytical applications , 2000, Electrophoresis.

[11]  Shawn D. Llopis,et al.  Contact conductivity detection in poly(methyl methacrylate)-based microfluidic devices for analysis of mono- and polyanionic molecules. , 2002, Analytical chemistry.

[12]  Yun Chen,et al.  Fabrication of PMMA CE microchips by infrared‐assisted polymerization , 2008, Electrophoresis.

[13]  K. Becker,et al.  A marketing approach to agar , 1990, Journal of Applied Phycology.