The design and implementation of a new digital dimming controller for the backlight resonant inverter

This paper presents a new digital dimming controller (DDC) for the backlight resonant inverter to improve the ignition behavior of the cold cathode fluorescent lamp (CCFL) and, hence, to increase the CCFL's lifespan. The DDC using a soft-starting technique (DDC-SST) is designed and developed to reduce the high ignition voltage and to eliminate the ignition current spikes. A full-bridge resonant inverter is adopted in the backlight system. The design considerations along with a complete analysis for said controller are detailed. Encouraging experimental results in close agreement with the theoretical analysis are also exhibited. The overall system power efficiency is approximately 85%. The ignition voltage is reduced by around 30% without any lamp current spike occurring during the dimming control operation. The apparent advantages of the proposed dimmer are listed in the conclusion.

[1]  M. Jordan,et al.  Resonant fluorescent lamp converter provides efficient and compact solution , 1993, Proceedings Eighth Annual Applied Power Electronics Conference and Exposition,.

[2]  Shmuel Ben-Yaakov,et al.  Current-sourcing push-pull parallel-resonance inverter (CS-PPRI): theory and application as a discharge lamp driver , 1994, IEEE Trans. Ind. Electron..

[3]  M. M. Jovanovic,et al.  The LCC inverter as a cold cathode fluorescent lamp driver , 1994, Proceedings of 1994 IEEE Applied Power Electronics Conference and Exposition - ASPEC'94.

[4]  Arthur F. Witulski,et al.  Analysis and design of current-fed push-pull resonant inverters-cold cathode fluorescent lamp drivers , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[5]  R. Redl,et al.  A low-cost control IC for single-transistor ZVS cold-cathode fluorescent lamp inverters and DC/DC converters , 1997, Proceedings of APEC 97 - Applied Power Electronics Conference.

[6]  Wen-Jung Ho,et al.  A cold-cathode fluorescent lamp driver circuit with synchronous primary-side dimming control , 1998, IEEE Trans. Ind. Electron..

[7]  Guan-Chyun Hsieh,et al.  Modeling and Estimating of the Fluorescent Lamp and Its Pre-heating Control , 1999 .

[8]  Iwao Sasase,et al.  Class DE current-source parallel resonant inverter , 1999, IEEE Trans. Ind. Electron..

[9]  Fred C. Lee,et al.  Single-stage power-factor-correction electronic ballast with a wide continuous dimming control for fluorescent lamps , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[10]  Young-Cheol Lim,et al.  An analysis of the backlight inverter by topologies , 2001, ISIE 2001. 2001 IEEE International Symposium on Industrial Electronics Proceedings (Cat. No.01TH8570).

[11]  S. W. Lee,et al.  Simplified control technique for LCD backlight inverter system using the mixed dimming method , 2001, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181).

[12]  Henry Shu-Hung Chung,et al.  An electronic ballast with wide dimming range, high PF, and low EMI , 2001 .

[13]  Guan-Chyun Hsieh,et al.  Primary-side charge-pump dimming controller for the cold-cathode fluorescent lamp ballast , 2001, Proceedings of IEEE Region 10 International Conference on Electrical and Electronic Technology. TENCON 2001 (Cat. No.01CH37239).

[14]  Guan-Chyun Hsieh,et al.  Harmonized strategy for breaking the striations in the fluorescent lamp , 2001, IEEE Trans. Ind. Electron..

[15]  Weiyun Chen.  Series-parallel resonant forward inverter as a cold cathode fluorescent lamp (CCFL) driver , 2002, APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335).

[16]  Chang-Hua Lin,et al.  Digital-dimming controller with current spikes elimination technique for LCD backlight electronic ballast , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..