Motion Control With Stiffness Adaptation for Torque Minimization in Multijoint Robots

This paper presents a motion control method for multi-joint robots, which involves the use of mechanical elastic elements with adjustable stiffness. Elastic elements are installed at each joint of the robots, and the proposed control method adaptively adjusts the stiffness of the elements. This stiffness adaptation minimizes actuator torque, while the control method generates fixed periodic motions. Advantages of the control method are that it works well without requiring the knowledge of the exact values of physical parameters or elaborate numerical calculations. We mathematically show trajectory-tracking performance of the control system, and the effect of torque minimization. Experimental results demonstrate that the proposed control method greatly reduces actuator torque while generating the desired motions.

[1]  Shigeki Sugano,et al.  Development of 4-DOF manipulator using mechanical impedance adjuster , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[2]  Warren E. Dixon,et al.  Repetitive learning control: a Lyapunov-based approach , 2002, IEEE Trans. Syst. Man Cybern. Part B.

[3]  M. Vukobratovic,et al.  A Method for Optimal Synthesis of Manipulation Robot Trajectories , 1982 .

[4]  Sadao Kawamura,et al.  Proposal of an Energy Saving Control Method for SCARA Robots , 2012, J. Robotics Mechatronics.

[5]  R. McN. Alexander,et al.  A minimum energy cost hypothesis for human arm trajectories , 1997, Biological Cybernetics.

[6]  J.T. Wen,et al.  Passivity based iterative learning control for mechanical systems subject to dry friction , 2008, 2008 American Control Conference.

[7]  Clay M. Thompson,et al.  Passive Dynamic Running , 1989, ISER.

[8]  Sadao Kawamura,et al.  A new mechanical structure for adjustable stiffness devices with lightweight and small size , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[9]  Alexander Rm,et al.  A minimum energy cost hypothesis for human arm trajectories. , 1997 .

[10]  Hiroaki Kobayashi,et al.  Design of a Tendon-Driven Articulated Finger-Hand Mechanism and Its Stiffness Adjustability , 2000 .

[11]  Suguru Arimoto,et al.  Control Theory of Nonlinear Mechanical Systems , 1996 .

[12]  Bram Vanderborght,et al.  Exploiting Natural Dynamics to Reduce Energy Consumption by Controlling the Compliance of Soft Actuators , 2006, Int. J. Robotics Res..

[13]  Sadao Kawamura,et al.  Power Assist Systems based on Resonance of Passive Elements , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[14]  Antonio Tornambè,et al.  A nonlinear observer for elastic robots , 1988, IEEE J. Robotics Autom..

[15]  Martin Buehler,et al.  Stable control of a simulated one-legged running robot with hip and leg compliance , 1997, IEEE Trans. Robotics Autom..

[16]  Takashi Emura,et al.  Energy-preserving control of a passive one-legged running robot , 2004, Adv. Robotics.

[17]  Richard W. Longman,et al.  Limit cycle behavior and convergence to zero error in learning control with stick-slip friction , 1994, Proceedings of IEEE International Conference on Systems, Man and Cybernetics.

[18]  Atsuo Kawamura,et al.  Trajectory planning of redundant manipulators for minimum energy consumption without matrix inversion , 1997, Proceedings of International Conference on Robotics and Automation.

[19]  Tad McGeer,et al.  Passive Dynamic Walking , 1990, Int. J. Robotics Res..

[20]  Sadao Kawamura,et al.  Generation of energy saving motion for biped walking robot through resonance-based control method , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[21]  Matthew M. Williamson,et al.  Series elastic actuators , 1995, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots.

[22]  S. Hara,et al.  Repetitive control system: a new type servo system for periodic exogenous signals , 1988 .

[23]  Hiroaki Kobayashi,et al.  A new impedance control concept for elastic joint robots , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[24]  Suguru Arimoto,et al.  Selective learning with a forgetting factor for robotic motion control , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[25]  Bernard Espiau,et al.  Limit cycles and their stability in a passive bipedal gait , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[26]  Antonio Bicchi,et al.  Embodying Desired Behavior in Variable Stiffness Actuators , 2011 .

[27]  Sadao Kawamura,et al.  Power assist system for sinusoidal motion by passive element and impedance control , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[28]  M. Spong.  Modeling and Control of Elastic Joint Robots , 1987 .

[29]  Tomohide Naniwa,et al.  A Hybrid Controller of Adaptive and Learning Control for Geometrically Constrained Robot Manipulators , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[30]  Sadao Kawamura,et al.  A New Control Method Utilizing Stiffness Adjustment of Mechanical Elastic Elements for Serial Link Systems , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[31]  J. Edward Colgate,et al.  Design of components for programmable passive impedance , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[32]  Russ Tedrake,et al.  Efficient Bipedal Robots Based on Passive-Dynamic Walkers , 2005, Science.

[33]  R. Ham,et al.  Compliant actuator designs , 2009, IEEE Robotics & Automation Magazine.

[34]  Sadao Kawamura,et al.  Resonance-based motion control method for multi-joint robot through combining stiffness adaptation and iterative learning control , 2009, 2009 IEEE International Conference on Robotics and Automation.