论文信息 - Evaluation of toughness degradation by small punch (SP) tests for neutron-irradiated 2Cr-1Mo steel

Evaluation of toughness degradation by small punch (SP) tests for neutron-irradiated 2Cr-1Mo steel

Mechanical properties correlations between the small punch (SP) test and conventional tensile, Charpy impact and fracture toughness tests were investigated on neutron irradiated 214Cr-1Mo ferritic steel. Estimation of radiation induced changes on tensile strength, elastic-plastic fracture toughness (JIC) and ductile-to-brittle transition temperature (DBTT) are thought to be basically possible by mechanical properties correlations when based on sufficient pre-irradiation data.

[1] Amit K. Ghosh,et al. Failure in thin sheets stretched over rigid punches , 1975 .

[2] Hideaki Takahashi,et al. Development of a further-miniaturized specimen of 3 mm diameter for tem disk (ø 3 mm) small punch tests , 1987 .

[3] Otto Buck,et al. Small punch test evaluation of intergranular embrittlement of an alloy steel , 1983 .

[4] Hideaki Takahashi,et al. Correlation between a Charpy V-notch impact test and a small punch test in ductile-brittle fracture mode transition behavior. , 1989 .

[5] T. Misawa,et al. Small punch tests for evaluating ductile-brittle transition behavior of irradiated ferritic steels , 1987 .

[6] H. Takahashi,et al. A Single Specimen Determination of JIc for Different Alloy Steels , 1980 .

[7] Hideaki Takahashi,et al. Characterization of Fracture Behavior in Small Punch Test by Combined Recrystallization-Etch Method and Rigid Plastic Analysis , 1987 .

[8] N. Aoki,et al. Fracture toughness evaluation of fusion reactor structural steels at low temperatures by small punch tests , 1989 .

[9] J. Kameda,et al. A kinetic model for ductile-brittle fracture mode transition behavior , 1986 .