Evidence for a surface confined ion-to-electron transduction reaction in solid-contact ion-selective electrodes based on poly(3-octylthiophene).

The ion-to-electron transduction reaction mechanism at the buried interface of the electrosynthesized poly(3-octylthiophene) (POT) solid-contact (SC) ion-selective electrode (ISE) polymeric membrane has been studied using synchrotron radiation-X-ray photoelectron spectroscopy (SR-XPS), near edge X-ray absorption fine structure (NEXAFS), and electrochemical impedance spectroscopy (EIS)/neutron reflectometry (NR). The tetrakis[3,5-bis(triflouromethyl)phenyl]borate (TFPB(-)) membrane dopant in the polymer ISE was transferred from the polymeric membrane to the outer surface layer of the SC on oxidation of POT but did not migrate further into the oxidized POT SC. The TFPB(-) and oxidized POT species could only be detected at the outer surface layer (≤14 Ǻ) of the SC material, even after oxidation of the electropolymerized POT SC for an hour at high anodic potential demonstrating that the ion-to-electron transduction reaction is a surface confined process. Accordingly, this study provides the first direct structural evidence of ion-to-electron transduction in the electropolymerized POT SC ISE by proving TFPB(-) transport from the polymeric ISE membrane to the oxidized POT SC at the buried interface of the SC ISE. It is inferred that the performance of the POT SC ISE is independent of the thickness of the POT SC but is instead contingent on the POT SC surface reactivity and/or electrical capacitance of the POT SC. In particular, the results suggest that the electropolymerized POT conducting polymer may spontaneously form a mixed surface/bulk oxidation state, which may explain the unusually high potential stability of the resulting ISE. It is anticipated that this new understanding of ion-to-electron transduction with electropolymerized POT SC ISEs will enable the development of new and improved devices with enhanced analytical performance attributes.

[1]  Ernö Pretsch,et al.  Elimination of undesirable water layers in solid-contact polymeric ion-selective electrodes. , 2008, Analytical chemistry.

[2]  Tan,et al.  X-ray photoelectron spectroscopic studies of poly(2,2'-bithiophene) and its complexes. , 1991, Physical review. B, Condensed matter.

[3]  Ernö Pretsch,et al.  Evidence of a water layer in solid-contact polymeric ion sensors. , 2008, Physical chemistry chemical physics : PCCP.

[4]  J. Brédas,et al.  Electronic structure of sulphur-containing conducting polymers , 1987 .

[5]  S. Jiang,et al.  Water uptake in the hydrophilic poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) solid-contact of all-solid-state polymeric ion-selective electrodes. , 2011, The Analyst.

[6]  F. Diederich,et al.  Redox-active self-assembled monolayers as novel solid contacts for ion-selective electrodes , 2000 .

[7]  Eric Bakker,et al.  Solid contact potentiometric sensors for trace level measurements. , 2006, Analytical chemistry.

[8]  D. Castner,et al.  Structure and order of phosphonic acid-based self-assembled monolayers on Si(100). , 2010, Langmuir : the ACS journal of surfaces and colloids.

[9]  J. Bobacka,et al.  Potential Stability of All-Solid-State Ion-Selective Electrodes Using Conducting Polymers as Ion-to-Electron Transducers. , 1999, Analytical chemistry.

[10]  Gwyn P. Williams,et al.  Electronic structure and orientation studies of undoped poly-3-alkyl thiophenes electrochemically deposited on Pt as studied by NEXAFS , 1988 .

[11]  E. A. Il’inchik.  Standards for x-ray photoelectron spectroscopy of boron compounds , 2008 .

[12]  T. Okajima,et al.  Effects of annealing on the molecular orientation in polytetrafluoroethylene thin films , 2012 .

[13]  A. Ivaska,et al.  Electrochemical study of poly(3-octylthiophene) film electrodes I. Electrolyte effects on the voltammetric characteristics of the polymer. Three states of the polymer film , 1991 .

[14]  Ernö Pretsch,et al.  Synthesis and characterization of high-integrity solid-contact polymeric ion sensors , 2009, Journal of solid state electrochemistry : current research and development in science and technology.

[15]  R. Cattrall,et al.  Some alkylphosphoric acid esters for use in coated-wire calcium-selective electrodes: Part I. Response characteristics , 1975 .

[16]  F. Rius,et al.  Ion-selective electrodes using carbon nanotubes as ion-to-electron transducers. , 2008, Analytical chemistry.

[17]  A. Stein,et al.  Ion-selective electrodes with three-dimensionally ordered macroporous carbon as the solid contact. , 2007, Analytical chemistry.

[18]  C. M. Elliott,et al.  Spectroscopic and electrochemical studies of charge transfer in modified electrodes , 1989 .

[19]  Y. Ouchi,et al.  NEXAFS spectroscopic studies of molecular orientation in α-sexithienyl evaporated thin films on metal films , 1996 .

[20]  F. Klose,et al.  The multipurpose time-of-flight neutron reflectometer “Platypus” at Australia's OPAL reactor , 2011 .

[21]  P. Si,et al.  Thin layer electrochemical extraction of non-redoxactive cations with an anion-exchanging conducting polymer overlaid with a selective membrane. , 2009, Chemical communications.

[22]  P. Hauser,et al.  A potassium-ion selective electrode with valinomycin based poly(vinyl chloride) membrane and a poly(vinyl ferrocene) solid contact , 1995 .

[23]  A. Ivaska,et al.  Potentiometric ion sensors. , 2008, Chemical reviews.

[24]  Yushin Kim,et al.  Stripping analysis of nanomolar perchlorate in drinking water with a voltammetric ion-selective electrode based on thin-layer liquid membrane. , 2008, Analytical chemistry.

[25]  Andrew Nelson,et al.  Co-refinement of multiple-contrast neutron/X-ray reflectivity data using MOTOFIT , 2006 .

[26]  Ernö Pretsch,et al.  Redox-Active Self-Assembled Monolayers for Solid-Contact Polymeric Membrane Ion-Selective Electrodes , 2002 .

[27]  Ernö Pretsch,et al.  Solid-contact polymeric membrane electrodes with detection limits in the subnanomolar range , 2004 .

[28]  A. Olszyna,et al.  Covalent binding of sensor phases--a recipe for stable potentials of solid-state ion-selective sensors. , 2008, Analytica chimica acta.

[29]  Z. Brzózka,et al.  Further studies on the role of redox-active monolayer as intermediate phase of solid-state sensors , 2007 .

[30]  Zbigniew Brzozka,et al.  Studies on ferrocene organothiol monolayer as an intermediate phase of potentiometric sensors with gold inner contact , 2005 .

[31]  A. Ivaska,et al.  Electrochemical study of poly(3-octylthiophene) film electrodes II. Reversible redox/conductivity state switching. Impedance study , 1991 .

[32]  F. Rius,et al.  Transduction mechanism of carbon nanotubes in solid-contact ion-selective electrodes. , 2009, Analytical chemistry.