Investigating surface defect by tool-material interaction in friction stir welding using coupled Eulerian-Lagrangian approach

[1]  S. Bag,et al.  A Finite Element Model for the Prediction of Chip Formation and Surface Morphology in Friction Stir Welding Process , 2021, Journal of Manufacturing Science and Engineering.

[2]  S. Bag,et al.  A finite element model for surface and volumetric defects in the FSW process using a coupled Eulerian–Lagrangian approach , 2021, Science and Technology of Welding and Joining.

[3]  S. Al-Sumaidae,et al.  Coupled Eulerian–Lagrangian prediction of thermal and residual stress environments in dissimilar friction stir welding of aluminum alloys , 2021, Journal of Advanced Joining Processes.

[4]  Surjya K. Pal,et al.  Prediction of Surface Profile in Friction Stir Welding Using Coupled Eulerian and Lagrangian Method , 2020, Volume 11: Heat Transfer and Thermal Engineering.

[5]  M. Awang,et al.  Thermal analysis of friction stir processing (FSP) using arbitrary Lagrangian‐Eulerian (ALE) and smoothed particle hydrodynamics (SPH) meshing techniques , 2020, Materialwissenschaft und Werkstofftechnik.

[6]  M. Cervera,et al.  Defect formation and material flow in Friction Stir Welding , 2020, European Journal of Mechanics - A/Solids.

[7]  Chuansong Wu,et al.  Progress in Thermomechanical Analysis of Friction Stir Welding , 2020 .

[8]  Nirav P. Patel,et al.  Numerical modelling on cooling assisted friction stir welding of dissimilar Al-Cu joint , 2019, Journal of Manufacturing Processes.

[9]  Zhi Zhu,et al.  A Finite Element Model to Simulate Defect Formation during Friction Stir Welding , 2017 .

[10]  Y. Shin,et al.  Investigation on the Effects of Process Parameters on Defect Formation in Friction Stir Welded Samples Via Predictive Numerical Modeling and Experiments , 2017 .

[11]  Enrico Filippi,et al.  Application of the Coupled Eulerian-Lagrangian (CEL) method to the modeling of orthogonal cutting , 2016 .

[12]  A. Galloway,et al.  Defect tolerance of friction stir welds in DH36 steel , 2015 .

[13]  H. Doude,et al.  Optimizing weld quality of a friction stir welded aluminum alloy , 2015 .

[14]  Edouard Rivière-Lorphèvre,et al.  On the introduction of adaptive mass scaling in a finite element model of Ti6Al4V orthogonal cutting , 2015, Simul. Model. Pract. Theory.

[15]  Norman McPherson,et al.  Development of a process envelope for friction stir welding of DH36 steel: A step change , 2014 .

[16]  V. Balasubramanian,et al.  Influences of pin profile and rotational speed of the tool on the formation of friction stir processing zone in AA2219 aluminium alloy , 2007 .

[17]  Young Gon Kim,et al.  Three defect types in friction stir welding of aluminum die casting alloy , 2006 .