Effect of Er,Cr:YSGG laser irradiation and self-etch adhesive systems on hypermineralized dentin: a bond strength evaluation

Over time teeth are exposed to several physical-chemical alterations, which may change the dental structure. Therefore, dental clinicians must be aware of how to manage the altered tissue. Laser irradiation and self-etch adhesives may be an option in this situation. This study aimed to evaluate the bond strength of self-etch adhesive systems associated with different treatments on hypermineralized dentin. 80 bovine incisors were distributed into two groups: Universal (3M ESPE; n = 40) and Optibond All in One (Kerr; n = 40). Five treatments were performed for each group (n = 8): (T1) adhesive system (control); (T2) acid + adhesive; (T3) Er,Cr:YSGG laser + adhesive; (T4) acid + Er,Cr:YSGG laser + adhesive; (T5) Er,Cr:YSGG laser + acid + adhesive. After bond and restorative procedures, teeth were submitted to microshear bond strength test. ANOVA two-way followed by Games-Howell Test was performed. Statistical significance difference was observed for adhesive systems and treatments (p ⩽ 0.001). For the adhesives used, Universal adhesive system presented the highest average bond strength. The highest bond strength was obtained in the control group (T1), T3 and T4. Laser irradiation may be a viable option as a surface pretreatment on hypermineralized dentin when self-etch adhesives are used.

[1]  Fahim Vohra,et al.  Effect of Er,Cr:YSGG on bond strength and microleakage of dentin bonded to resin composite with different distance and irradiation time. , 2019, Photodiagnosis and photodynamic therapy.

[2]  N. Gutknecht,et al.  Adhesion in Dentin Prepared with Er,Cr:YSGG Laser: Systematic Review , 2019, Contemporary clinical dentistry.

[3]  Sultan A. Alharthi,et al.  Influence of Er: Cr: YSGG laser on adhesive strength and microleakage of dentin bonded to resin composite. In-vitro study. , 2018, Photodiagnosis and photodynamic therapy.

[4]  S. Shahabi,et al.  Relationship between Er,Cr:YSGG laser power and surface roughness of lased radicular dentin , 2018, Journal of dental research, dental clinics, dental prospects.

[5]  M. Leite,et al.  Bond Strength and Cytotoxicity of a Universal Adhesive According to the Hybridization Strategies to Dentin. , 2018, Brazilian dental journal.

[6]  F. Tay,et al.  Dentin bonding systems: From dentin collagen structure to bond preservation and clinical applications. , 2018, Dental materials : official publication of the Academy of Dental Materials.

[7]  F. D. Nascimento,et al.  Bond strength and adhesive interface analysis using EDTA as a dentin conditioner , 2017 .

[8]  William A. Fried,et al.  Influence of multi‐wavelength laser irradiation of enamel and dentin surfaces at 0.355, 2.94, and 9.4 μm on surface morphology, permeability, and acid resistance , 2017, Lasers in surgery and medicine.

[9]  Tingting Li,et al.  Adhesive interfacial characteristics and the related bonding performance of four self-etching adhesives with different functional monomers applied to dentin. , 2017, Journal of dentistry.

[10]  D. Pashley,et al.  Defying ageing: An expectation for dentine bonding with universal adhesives? , 2016, Journal of dentistry.

[11]  F. Tay,et al.  Mechanisms of degradation of the hybrid layer in adhesive dentistry and therapeutic agents to improve bond durability--A literature review. , 2016, Dental materials : official publication of the Academy of Dental Materials.

[12]  M. Ayar,et al.  Effects of Er,Cr:YSGG laser parameters on dentin bond strength and interface morphology , 2015, Microscopy research and technique.

[13]  E. Piva,et al.  Bond strength of universal adhesives: A systematic review and meta-analysis. , 2015, Journal of dentistry.

[14]  K. Jiao,et al.  Bonding of universal adhesives to dentine--Old wine in new bottles? , 2015, Journal of dentistry.

[15]  Dwayne Arola,et al.  Importance of age on the dynamic mechanical behavior of intertubular and peritubular dentin. , 2015, Journal of the mechanical behavior of biomedical materials.

[16]  Ankur Gupta,et al.  Comparative evaluation of surface topography of tooth prepared using erbium, chromium: Yttrium, scandium, gallium, garnet laser and bur and its clinical implications , 2015, Journal of Indian Prosthodontic Society.

[17]  A. Florescu,et al.  Microscopy comparative evaluation of the SE systems adhesion to normal and sclerotic dentin. , 2015, Romanian journal of morphology and embryology = Revue roumaine de morphologie et embryologie.

[18]  J. Perdigão,et al.  Immediate adhesive properties to dentin and enamel of a universal adhesive associated with a hydrophobic resin coat. , 2014, Operative dentistry.

[19]  M. D. De Goes,et al.  Performance of a new one-step multi-mode adhesive on etched vs non-etched enamel on bond strength and interfacial morphology. , 2014, The journal of adhesive dentistry.

[20]  P. Freitas,et al.  Effects of Er:YAG and Er,Cr:YSGG laser irradiation on the adhesion to eroded dentin , 2013, Lasers in Medical Science.

[21]  P. Freitas,et al.  Microtensile bond strength analysis of adhesive systems to Er:YAG and Er,Cr:YSGG laser-treated dentin , 2014, Lasers in Medical Science.

[22]  R. Palma-Dibb,et al.  Influence of Er,Cr:YSGG laser irradiation on enamel caries prevention , 2012, Lasers in Medical Science.

[23]  A. Monzavi,et al.  The effect of erbium family laser on tensile bond strength of composite to dentin in comparison with conventional method , 2012, Lasers in Medical Science.

[24]  M. Tyas,et al.  Comparison of two all-in-one adhesives bonded to non-carious cervical lesions—results at 3 years , 2012, Clinical Oral Investigations.

[25]  A. Moritz,et al.  Morphology of resin–dentin interfaces after Er,Cr:YSGG laser and acid etching preparation and application of different bonding systems , 2012, Lasers in Medical Science.

[26]  P. M. de Freitas,et al.  Bond strength of adhesive systems to Er,Cr:YSGG laser-irradiated dentin. , 2011, Photomedicine and laser surgery.

[27]  P. M. de Freitas,et al.  Effects of ultramorphological changes on adhesion to lased dentin—Scanning electron microscopy and transmission electron microscopy analysis , 2011, Microscopy research and technique.

[28]  M V Cardoso,et al.  Current aspects on bonding effectiveness and stability in adhesive dentistry. , 2011, Australian dental journal.

[29]  D. Pan,et al.  Evaluation of phase, microstructure and composition of human dentine after Er,Cr:YSGG laser irradiation. , 2011, Journal of nanoscience and nanotechnology.

[30]  A. Mine,et al.  State of the art of self-etch adhesives. , 2011, Dental materials : official publication of the Academy of Dental Materials.

[31]  Christian Apel,et al.  Influence of etching time on bond strength in dentin irradiated with erbium lasers , 2010, Lasers in Medical Science.

[32]  M. Malkoç,et al.  Effects of laser and acid etching and air abrasion on mineral content of dentin , 2009, Lasers in Medical Science.

[33]  N. Gutknecht,et al.  Bond strength of self-etching primer to bur cut, Er,Cr:YSGG, and Er:YAG lased dental surfaces. , 2007, Photomedicine and laser surgery.

[34]  P. Freitas,et al.  The Use of Er:YAG Laser for Cavity Preparation: An SEM Evaluation , 2007, Microscopy research and technique.

[35]  Christian Apel,et al.  Analysis of the interfacial micromorphology of adhesive systems in cavities prepared with Er,Cr:YSGG, Er:YAG laser and bur , 2007, Microscopy research and technique.

[36]  Bor-Shiunn Lee,et al.  Tensile bond strength of Er,Cr:YSGG laser-irradiated human dentin and analysis of dentin-resin interface. , 2007, Dental materials : official publication of the Academy of Dental Materials.

[37]  P. Lambrechts,et al.  A Critical Review of the Durability of Adhesion to Tooth Tissue: Methods and Results , 2005, Journal of dental research.

[38]  P. Spencer,et al.  Physiochemical interactions at the interfaces between self-etch adhesive systems and dentine. , 2004, Journal of dentistry.

[39]  F. Tay,et al.  Resin bonding to cervical sclerotic dentin: a review. , 2004, Journal of dentistry.

[40]  Mozammal Hossain,et al.  Clinical assessment of Er,Cr:YSGG laser application for cavity preparation. , 2002, Journal of clinical laser medicine & surgery.

[41]  D. Pashley,et al.  Bonding of a self-etching primer to non-carious cervical sclerotic dentin: interfacial ultrastructure and microtensile bond strength evaluation. , 2000, The journal of adhesive dentistry.