Recent developments in cathode materials for lithium ion batteries

[1]  Myoung-Youp Song,et al.  Electrochemical properties of Li1−z(Ni1−yFey)1+zO2 synthesized by the combustion method in an air atmosphere , 2009, Journal of Applied Electrochemistry.

[2]  Yanfeng Yang,et al.  Preparation and electrochemical performance of Li3V2(PO4)3/C cathode material by spray-drying and carbothermal method , 2010 .

[3]  Zaiping Guo,et al.  Synthesis and electrochemical properties of nanosized carbon-coated Li1−3xLaxFePO4 composites , 2010 .

[4]  Marina Mastragostino,et al.  A three-dimensional carbon-coated LiFePO4 electrode for high-power applications , 2010 .

[5]  T. Kudo,et al.  Surface modified LiFePO4/C nanocrystals synthesis by organic molecules assisted supercritical water process , 2009 .

[6]  Zaiping Guo,et al.  Synthesis of LiFe1−xNixPO4/C composites and their electrochemical performance , 2009 .

[7]  Xiqian Yu,et al.  Electrochemical performance of LiFePO4 thin films with different morphology and crystallinity , 2009 .

[8]  K. R. Padmanabhan,et al.  The effect of titanium on the lithium intercalation capacity of V2O5 thin films , 2009 .

[9]  T. Chou,et al.  Template-free reverse micelle process for the synthesis of a rod-like LiFePO4/C composite cathode material for lithium batteries , 2009 .

[10]  Rahul Singhal,et al.  High voltage spinel cathode materials for high energy density and high rate capability Li ion rechargeable batteries , 2009 .

[11]  Tao Huang,et al.  The defect chemistry of LiFePO4 prepared by hydrothermal method at different pH values , 2009 .

[12]  E. Zhecheva,et al.  Fe3+ and Ni3+ impurity distribution and electrochemical performance of LiCoO2 electrode materials for lithium ion batteries , 2009 .

[13]  J. Shu.  Electrochemical behavior and stability of Li4Ti5O12 in a broad voltage window , 2009 .

[14]  Rongshun Wang,et al.  An effective and simple way to synthesize LiFePO4/C composite , 2009 .

[15]  Youzhong Dong,et al.  Preparation and electrochemical performance studies on Cr-doped Li3V2(PO4)3 as cathode materials for lithium-ion batteries , 2009 .

[16]  A. Shukla,et al.  Rapid synthetic routes to prepare LiNi1/3Mn1/3Co1/3O2 as a high voltage high-capacity Li-ion battery cathode material , 2009 .

[17]  Xinqun Cheng,et al.  Effect of ZnO modification on the performance of LiNi0.5Co0.25Mn0.25O2 cathode material , 2009 .

[18]  G. Liu,et al.  The electrochemical properties of LiNi0.5Mn1.2Ti0.3O4 compound , 2009 .

[19]  Myoung-Youp Song,et al.  Electrochemical properties of LiNi1―yFeyO2 synthesized by the combustion method in O2 , 2009 .

[20]  B. Hwang,et al.  Influence of synthesis conditions on electrochemical properties of high-voltage Li1.02Ni0.5Mn1.5O4 spinel cathode material , 2009 .

[21]  Jenn‐Shing Chen,et al.  Physical and electrochemical properties of LiFePO4/C composite cathode prepared from various polymer-containing precursors , 2009 .

[22]  Zhen Zhou,et al.  Improved high-rate charge/discharge performances of LiFePO4/C via V-doping , 2009 .

[23]  Chong Seung Yoon,et al.  Nanoporous Structured LiFePO4 with Spherical Microscale Particles Having High Volumetric Capacity for Lithium Batteries , 2009 .

[24]  Xiaogang Zhang,et al.  Electrochemical properties of LiFePO4/C synthesized using polypyrrole as carbon source , 2009 .

[25]  T. Yang,et al.  Improvement of high-voltage cycling behavior of Li(Ni1/3Co1/3Mn1/3)O2 cathodes by Mg, Cr, and Al substitution , 2009 .

[26]  K. Nikolowski,et al.  Electrochemical properties of Cr doped V2O5 between 3.8 V and 2.0 V , 2009 .

[27]  C. Yoon,et al.  Improvement of High Voltage Cycling Performances of Li [ Ni1 / 3Co1 / 3Mn1 / 3 ] O2 at 55 ° C by a ( NH4 ) 3AlF6 Coating , 2009 .

[28]  W. Sigle,et al.  Delithiation Study of LiFePO4 Crystals Using Electron Energy-Loss Spectroscopy , 2009 .

[29]  Wenbin Luo,et al.  Comparative study of Li[Co1−zAlz]O2 prepared by solid-state and co-precipitation methods , 2009 .

[30]  S. Okada,et al.  A new iron oxyfluoride cathode active material for Li-ion battery, Fe2OF4 , 2009 .

[31]  Hongwei Tang,et al.  Synthesis and characterization of high-density LiFePO4/C composites as cathode materials for lithium-ion batteries , 2009 .

[32]  Won-Sub Yoon,et al.  Nano-sized Lithium Manganese Oxide Dispersed on Carbon Nanotubes for Energy Storage Applications , 2009 .

[33]  G. Rao,et al.  Synthesis, Characterization, and Electrochemical Cycling Behavior of the Ru-Doped Spinel, Li [ Mn2 − x Ru x ] O4 (x = 0 , 0.1, and 0.25) , 2009 .

[34]  Kisuk Kang,et al.  Phase Stability Study of Li1-xMnPO4 (0 <= x <= 1) Cathode for Li Rechargeable Battery , 2009 .

[35]  Xiangming He,et al.  Recent advances in layered LiNixCoyMn1−x−yO2 cathode materials for lithium ion batteries , 2009 .

[36]  Yifu Yang,et al.  Electrochemical performance of Ru-doped LiFePO4/C cathode material for lithium-ion batteries , 2009 .

[37]  Haoshen Zhou,et al.  Synthesis and electrochemical properties of single-crystalline LiV3O8 nanorods as cathode materials for rechargeable lithium batteries , 2009 .

[38]  Kyung Yoon Chung,et al.  In situ X-ray diffraction studies of mixed LiMn2O4–LiNi1/3Co1/3Mn1/3O2 composite cathode in Li-ion cells during charge–discharge cycling , 2009 .

[39]  Xiaoyan Lv,et al.  Carbon combustion synthesis of LiNi0.5Mn1.5O4 and its use as a cathode material for lithium ion batteries , 2009 .

[40]  Li Lu,et al.  Properties of LiNi1/3Co1/3Mn1/3O2 cathode material synthesized by a modified Pechini method for high-power lithium-ion batteries , 2009 .

[41]  P. Novák,et al.  Electrochemical Stress at High Potential to Investigate Phase Transitions in Li1.1(Ni1/3Mn1/3Co1/3)0.9O2 , 2009 .

[42]  John Newman,et al.  Experiments on and Modeling of Positive Electrodes with Multiple Active Materials for Lithium-Ion Batteries , 2009 .

[43]  Li Lu,et al.  Enhancements of rate capability and cyclic performance of spinel LiNi0.5Mn1.5O4 by trace Ru-doping , 2009 .

[44]  D. Abraham,et al.  Morphology, Structure, and Electrochemistry of Solution-Derived LiMn0.5 − x Cr2x Ni0.5 − x O2 for Lithium-Ion Cells , 2009 .

[45]  Philippe Knauth,et al.  Inorganic solid Li ion conductors: An overview , 2009 .

[46]  S. Majumder,et al.  Understanding the role of Zr4+ cation in improving the cycleability of LiNi0.8Co0.15Zr0.05O2 cathodes for Li ion rechargeable batteries , 2009 .

[47]  K. Fung,et al.  Effect of chitosan on deposition of LiCoO2 thin film for Li-ion batteries , 2009 .

[48]  Feng Wu,et al.  Study on Li1+xV3O8 synthesized by microwave sol–gel route , 2009 .

[49]  Arumugam Manthiram,et al.  Eliminating the irreversible capacity loss of high capacity layered Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode by blending with other lithium insertion hosts , 2009 .

[50]  Feng Wu,et al.  Effect of TiO2-coating on the electrochemical performances of LiCo1/3Ni1/3Mn1/3O2 , 2009 .

[51]  G. Avdeev,et al.  Sucrose-aided combustion synthesis of nanosized LiMn1.99−yLiyM0.01O4 (M = Al3+, Ni2+, Cr3+, Co3+, y = 0.01 and 0.06) spinels: Characterization and electrochemical behavior at 25 and at 55 °C in rechargeable lithium cells , 2009 .

[52]  Ying Shirley Meng,et al.  Electrochemical and Structural Study of the Layered, “Li-Excess” Lithium-Ion Battery Electrode Material Li[Li1/9Ni1/3Mn5/9]O2 , 2009 .

[53]  Haoshen Zhou,et al.  Three-dimensional architectures of spinel-type LiMn2O4 prepared from biomimetic porous carbonates and their application to a cathode for lithium-ion batteries , 2009 .

[54]  Cara M. Doherty,et al.  Colloidal Crystal Templating to Produce Hierarchically Porous LiFePO4 Electrode Materials for High Power Lithium Ion Batteries , 2009 .

[55]  Hongwei Tang,et al.  Synthesis and Electrochemical Properties of High Density LiNi0.8Co0.2 − x Ti x O2 for Lithium-Ion Batteries , 2009 .

[56]  Karim Zaghib,et al.  Electrochemical and Thermal Studies of Carbon-Coated LiFePO4 Cathode , 2009 .

[57]  Jaephil Cho,et al.  Effect of LiCoO2 Cathode Nanoparticle Size on High Rate Performance for Li-Ion Batteries , 2009 .

[58]  Yang‐Kook Sun,et al.  Improvement of electrochemical and thermal properties of Li[Ni0.8Co0.1Mn0.1]O2 positive electrode materials by multiple metal (Al, Mg) substitution , 2009 .

[59]  Soon-Do Yoon,et al.  Electrochemical properties of LiNi1−yMyO2 (M=Ni, Ga, Al and/or Ti) cathodes synthesized by the combustion method , 2009 .

[60]  Xueliang Li,et al.  Structural and electrochemical characterization of LiFePO4/C prepared by a sol–gel route with long- and short-chain carbon sources , 2009 .

[61]  C. Fonseca,et al.  Synthesis and characterization of LiMxMn2―xO4 (M = Al, Bi and Cs ions) films for lithium ion batteries , 2009 .

[62]  Zhen Zhou,et al.  Sol–gel preparation and electrochemical performances of LiFe1/3Mn1/3Co1/3PO4/C composites with core–shell nanostructure , 2009 .

[63]  G. Amatucci,et al.  Iron Oxyfluorides as High Capacity Cathode Materials for Lithium Batteries , 2009 .

[64]  E. Rodríguez-Castellón,et al.  Effect of C and Au additives produced by simple coaters on the surface and the electrochemical properties of nanosized LiFePO4 , 2009 .

[65]  Jae-won Lee,et al.  Effect of LiNi1/2Mn1/2O2 coating on the electrochemical performance of Li―Mn spinel , 2009 .

[66]  Yang Yang,et al.  Superior high-rate cycling performance of LiFePO4/C-PPy composite at 55 °C , 2009 .

[67]  Ru‐Shi Liu,et al.  Effect of LiI Amount to Enhance the Electrochemical Performance of Carbon-Coated LiFePO4 , 2009 .

[68]  Huakun Liu,et al.  Studies on electrochemical behaviour of zinc-doped LiFePO4 for lithium battery positive electrode , 2009 .

[69]  Ugo Lafont,et al.  Physical and electrochemical properties of LiFe0.5Mn1.5O4 spinel synthesized by different methods , 2009 .

[70]  Yun Jung Lee,et al.  Fabricating Genetically Engineered High-Power Lithium-Ion Batteries Using Multiple Virus Genes , 2009, Science.

[71]  L. Hong,et al.  Preparation and electrochemical properties of spherical LiFePO4 and LiFe0.9Mg0.1PO4 cathode materials for lithium rechargeable batteries , 2009 .

[72]  Yan Zhao,et al.  Optimized carbon-coated LiFePO4 cathode material for lithium-ion batteries , 2009 .

[73]  Kazuhisa Tamura,et al.  Surface Structure of LiNi0.8Co0.2O2: a New Experimental Technique Using in Situ X-ray Diffraction and Two-Dimensional Epitaxial Film Electrodes , 2009 .

[74]  N. Kuwata,et al.  Structural and electrochemical studies on thin film LiNi0.8Co0.2O2 by PLD for micro battery , 2009 .

[75]  N. Kuwata,et al.  Ionic diffusion and structural changes in lithium compounds , 2009 .

[76]  Itaru Honma,et al.  Size effect on electrochemical property of nanocrystalline LiCoO2 synthesized from rapid thermal annealing method , 2009 .

[77]  Yuhong Chen,et al.  Synthesis and characterization of Zn-doped LiCo0.3Ni0.4(xMn0.3ZnxO2 cathode materials for lithium-ion batteries , 2009 .

[78]  P. Novák,et al.  Electrochemistry of LiMn2O4 nanoparticles made by flame spray pyrolysis. , 2009, Physical chemistry chemical physics : PCCP.

[79]  T. Gustafsson,et al.  Effect of Short-Chain Amine Coatings on the Performance of LiFePO4 Li-Ion Battery Cathodes , 2009 .

[80]  Emilie Bekaert,et al.  Synthesis of Li1.1(Ni0.425Mn0.425Co0,15)0.9O1.8F0.2 Materials by Different Routes : Is There Fluorine Substitution for Oxygen? , 2009 .

[81]  Tsuyoshi Sasaki,et al.  Capacity-Fading Mechanisms of LiNiO2-Based Lithium-Ion Batteries II. Diagnostic Analysis by Electron Microscopy and Spectroscopy , 2009 .

[82]  D. Lee,et al.  Improved electrochemical properties of Li(Ni0.7Co0.3)O2 cathode for lithium ion batteries with controlled sintering conditions , 2009 .

[83]  Xiangming He,et al.  Electrochemical performance of SrF2-coated LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries , 2009 .

[84]  J. L. Gómez‐Cámer,et al.  Combining 5 V LiNi0.5Mn1.5O4 spinel and Si nanoparticles for advanced Li-ion batteries , 2009 .

[85]  C. Chen,et al.  Synthesis and characterization of carbon-coated Li3V2(PO4)3 cathode materials with different carbon sources , 2009 .

[86]  Wen Chen,et al.  Synthesis, structural, and electrochemical performance of V2O5 nanotubes as cathode material for lithium battery , 2009 .

[87]  Gang Chen,et al.  Structural and electrochemical properties of LiNi0.5Mn0.5 − xAlxO2 (x = 0, 0.02, 0.05, 0.08, and 0.1) cathode materials for lithium-ion batteries , 2009 .

[88]  N. Kosova,et al.  LiMn2O4 and LiCoO2 composite cathode materials obtained by mechanical activation , 2009 .

[89]  S. Zhao,et al.  Electrochemical properties of spinel LiCoxMn2−xO4 prepared by sol–gel process , 2009 .

[90]  T. Gustafsson,et al.  A delithiated LiNi0.65Co0.25Mn0.10O2 electrode material : A structural, magnetic and electrochemical study , 2009 .

[91]  Yongmei Liu,et al.  Structure and electrochemical performance of LiV3O8 synthesized by solid-state routine with quenching in freezing atmosphere , 2009 .

[92]  Jun-ichi Yamaki,et al.  Cathodic performance of LiMn1−xMxPO4 (M = Ti, Mg and Zr) annealed in an inert atmosphere , 2009 .

[93]  Zhanxu Yang,et al.  The effect of a Co―Al mixed metal oxide coating on the elevated temperature performance of a LiMn2O4 cathode material , 2009 .

[94]  Shin-ichi Nishimura,et al.  Structural and magnetic properties of Lix(MnyFe1−y)PO4 electrode materials for Li-ion batteries , 2009 .

[95]  Yet-Ming Chiang,et al.  Aliovalent Substitutions in Olivine Lithium Iron Phosphate and Impact on Structure and Properties , 2009 .

[96]  T. Matsushima.  Deterioration estimation of lithium-ion cells in direct current power supply systems and characteristics of 400-Ah lithium-ion cells , 2009 .

[97]  Zhen Zhou,et al.  LiVOPO4: A cathode material for 4 V lithium ion batteries , 2009 .

[98]  P. Novák,et al.  Flame co-synthesis of LiMn2O4 and carbon nanocomposites for high power batteries , 2009 .

[99]  Guangchuan Liang,et al.  The cycling performance of LiFePO4/C cathode materials , 2009 .

[100]  Jacob L. Jones,et al.  Intermittent X-ray diffraction study of kinetics of delithiation in nano-scale LiFePO4 , 2009 .

[101]  J. Dahn,et al.  Advantages of Simultaneous Substitution of Co in Li [ Ni1 ∕ 3Mn1 ∕ 3Co1 ∕ 3 ] O2 by Ni and Al , 2009 .

[102]  Tsuyoshi Sasaki,et al.  Capacity-Fading Mechanisms of LiNiO2-Based Lithium-Ion Batteries I. Analysis by Electrochemical and Spectroscopic Examination , 2009 .

[103]  H. Ahn,et al.  Effect of synthetic conditions on the electrochemical properties of LiMn0.4Fe0.6PO4/C synthesized by sol–gel technique , 2009 .

[104]  Mao-sung Chen,et al.  Preparation and characterization of Ti4+-doped LiFePO4 cathode materials for lithium-ion batteries , 2009 .

[105]  W. Yoon,et al.  Electrochemical behaviors of wax-coated Li powder/Li4Ti5O12 cells , 2009 .

[106]  Yang‐Kook Sun,et al.  Effect of protecting metal oxide (Co3O4) layer on electrochemical properties of spinel Li1.1Mn1.9O4 as a cathode material for lithium battery applications , 2009 .

[107]  Michael Grätzel,et al.  High-performance, nano-structured LiMnPO4 synthesized via a polyol method , 2009 .

[108]  H. Kao,et al.  The effect of carbon coating thickness on the capacity of LiFePO4/C composite cathodes , 2009 .

[109]  H. Kao,et al.  Study of LiFePO4 cathode materials coated with high surface area carbon , 2009 .

[110]  K. Lee,et al.  Electrochemical properties of LiFe0.9Mn0.1PO4/Fe2P cathode material by mechanical alloying , 2009 .

[111]  Feng Wu,et al.  Surface modification of LiCo1/3Ni1/3Mn1/3O2 with Y2O3 for lithium-ion battery , 2009 .

[112]  Kiyoharu Tadanaga,et al.  High-rate performance of all-solid-state lithium secondary batteries using Li4Ti5O12 electrode , 2009 .

[113]  Chung‐Hsin Lu,et al.  Microemulsion preparation and electrochemical characteristics of LiNi1/3Co1/3Mn1/3O2 powders , 2009 .

[114]  Zhixing Wang,et al.  Synthesis and electrochemical properties of metals-doped LiFePO4 prepared from the FeSO4·7H2O waste slag , 2009 .

[115]  Zongping Shao,et al.  Process investigation, electrochemical characterization and optimization of LiFePO4/C composite from mechanical activation using sucrose as carbon source , 2009 .

[116]  K. Tadanaga,et al.  All-solid-state lithium secondary batteries with oxide-coated LiCoO2 electrode and Li2S–P2S5 electrolyte , 2009 .

[117]  Xiao‐Qing Yang,et al.  In situ X-ray absorption and diffraction studies of carbon coated LiFe1/4Mn1/4Co1/4Ni1/4PO4 cathode during first charge , 2009 .

[118]  Shi-gang Lu,et al.  Enhanced capacity retention of Co and Li doubly doped LiMn2O4 , 2009 .

[119]  T. Fukutsuka,et al.  Cathode having high rate performance for a secondary Li-ion cell surface-modified by aluminum oxide nanoparticles , 2009 .

[120]  Lu Zhentan,et al.  Preparation and electrochemical properties of indium- and sulfur-doped LiMnO2 with orthorhombic structure as cathode materials , 2009 .

[121]  S. Gopukumar,et al.  Microwave assisted synthesis and electrochemical behaviour of LiMg0.1Co0.9O2 for lithium rechargeable batteries , 2009 .

[122]  Yang-Kook Sun,et al.  Electrochemical characterization of Li2MnO3–Li[Ni1/3Co1/3Mn1/3]O2–LiNiO2 cathode synthesized via co-precipitation for lithium secondary batteries , 2009 .

[123]  Li-zhen Fan,et al.  All-solid-state polymer electrolyte with plastic crystal materials for rechargeable lithium-ion battery , 2009 .

[124]  Michael M. Thackeray,et al.  Enhancing the rate capability of high capacity xLi2MnO3 · (1 -x)LiMO2 (M = Mn, Ni, Co) electrodes by Li-Ni-PO4 treatment , 2009 .

[125]  Dong‐Won Kim,et al.  Effect of an inorganic additive on the cycling performances of lithium-ion polymer cells assembled with polymer-coated separators , 2009 .

[126]  Yan Liu,et al.  Improvement of electrochemical and thermal stability of LiFePO4 cathode modified by CeO2 , 2009 .

[127]  Doron Aurbach,et al.  A comparative study of electrodes comprising nanometric and submicron particles of LiNi0.50Mn0.50O2. LiNi0.33Mn0.33Co0.33O2. and LiNi0.40Mn0.40Co0.20O2 layered compounds , 2009 .

[128]  K. T. Lee,et al.  Li–B–O–N electrolytes for all-solid-state thin film batteries , 2009 .

[129]  Yuewu Zeng,et al.  Surface structure investigation of LiNi0.8Co0.2O2 by AlPO4 coating and using functional electrolyte , 2009 .

[130]  J. Yamaki,et al.  Electrochemical properties of rechargeable aqueous lithium ion batteries with an olivine-type cathode and a Nasicon-type anode , 2009 .

[131]  Naoto Kitamura,et al.  Improvement of cathode performance of LiMn2O4 as a cathode active material for Li ion battery by step-by-step supersonic-wave treatments , 2009 .

[132]  J. Barker,et al.  Lithium metal phosphates, power and automotive applications , 2009 .

[133]  Yanfeng Yang,et al.  Preparation and characterization of mesoporous LiFePO4/C microsphere by spray drying assisted template method , 2009 .

[134]  Yang-Kook Sun,et al.  Effects of Co doping on Li[Ni0.5CoxMn1.5−x]O4 spinel materials for 5 V lithium secondary batteries via Co-precipitation , 2009 .

[135]  Yang Yong,et al.  Electrochemical performance and capacity fading reason of LiMn2O4/graphite batteries stored at room temperature , 2009 .

[136]  Pengfei Shi,et al.  Effect of Ag additive on the performance of LiNi1/3Co1/3Mn1/3O2 cathode material for lithium ion battery , 2009 .

[137]  Doron Aurbach,et al.  A short review on surface chemical aspects of Li batteries: A key for a good performance , 2009 .

[138]  K. Kanamura,et al.  High rate discharge capability of single particle electrode of LiCoO2 , 2009 .

[139]  A. Jalbout,et al.  LiFePO4 as an optimum power cell material , 2009 .

[140]  Haijiao Zhang,et al.  Morphology and electrical properties of carbon coated LiFePO4 cathode materials , 2009 .

[141]  G. Fey,et al.  Electrochemical studies on LiCoO2 surface coated with Y3Al5O12 for lithium-ion cells , 2009 .

[142]  J. Yeh,et al.  Structure studies on LiMn0.25Fe0.75PO4 by in-situ synchrotron X-ray diffraction analysis , 2009 .

[143]  Weishan Li,et al.  Preparation and performances of LiFePO4 cathode in aqueous solvent with polyacrylic acid as a binder , 2009 .

[144]  Xiangming He,et al.  Synthesis and characterization of LiNi0.6Mn0.4―xCoxO2 as cathode materials for Li-ion batteries , 2009 .

[145]  Jou-Hyeon Ahn,et al.  Effect of firing temperature on the electrochemical performance of LiMn0.4Fe0.6PO4/C materials prepared by mechanical activation , 2009 .

[146]  Lise Daniel,et al.  High voltage spinel oxides for Li-ion batteries: From the material research to the application , 2009 .

[147]  T. Fukutsuka,et al.  Electronic structures of partially fluorinated lithium manganese spinel oxides and their electrochemical properties , 2009 .

[148]  R. Katiyar,et al.  Investigations on 0.5 Li ( Ni0.8Co0.15Zr0.05 ) O2 – 0.5 Li ( Li1 ∕ 3Mn2 ∕ 3 ) O2 Cathode for Li Rechargeable Batteries , 2009 .

[149]  Chung‐Hsin Lu,et al.  Preparation and electrochemical properties of layer-structured LiNi1/3Co1/3Mn1/3−yAlyO2 , 2009 .

[150]  Hui Zhan,et al.  Sb2O3-modified Li1.1CoO2 phase as cathode material for lithium ion battery , 2009 .

[151]  A. Yamada,et al.  Shift of redox potential and kinetics in Lix(MnyFe1−y)PO4 , 2009 .

[152]  J. Dahn,et al.  Synthesis, Electrochemical Properties, and Thermal Stability of Al-Doped LiNi1 ∕ 3Mn1 ∕ 3Co ( 1 ∕ 3 − z ) Al z O2 Positive Electrode Materials , 2009 .

[153]  A. Manthiram,et al.  Understanding the Improvement in the Electrochemical Properties of Surface Modified 5 V Limn1.42Ni0.42Co0.16O4 Spinel Cathodes in Lithium-ion Cells , 2009 .

[154]  Margret Wohlfahrt-Mehrens,et al.  Nonstoichiometric LiFePO4: Defects and Related Properties , 2009 .

[155]  B. Hwang,et al.  Cycle life improvement of ZrO2-coated spherical LiNi1/3Co1/3Mn1/3O2 cathode material for lithium ion batteries , 2009 .

[156]  Jiangfeng Ni,et al.  A modified ZrO2-coating process to improve electrochemical performance of Li(Ni1/3Co1/3Mn1/3)O2 , 2009 .

[157]  S. H. Park,et al.  Synthesis and electrochemical characterizations of dual doped Li1.05Fe0.997Cu0.003PO4 , 2009 .

[158]  V. O. Sycheva,et al.  Electrochemical properties of LiMn2−yMeyO4 (Me = Cr, Co, Ni) spinels as cathodic materials for lithium-ion batteries , 2009 .

[159]  M. Doeff,et al.  Structure and Electrochemistry of LiNi1/3Co1/3-yMyMn1/3O2 (M=Ti, Al, Fe) Positive Electrode Materials , 2009 .

[160]  M. Avdeev,et al.  Investigation of cell parameters, microstructures and electrochemical behaviour of LiMn2O4 normal and nano powders , 2009 .

[161]  Yonglang Guo,et al.  Effect of reduction agent on the performance of Li3V2(PO4)3/C positive material by one-step solid-state reaction , 2009 .

[162]  S. Komaba,et al.  Structural and electrochemical behaviors of metastable Li2/3[Ni1/3Mn2/3]O2 modified by metal element substitution , 2009 .

[163]  Seok-Jin Yoon,et al.  XPS/EXAFS study of cycleability improved LiMn2O4 thin film cathodes prepared by solution deposition , 2009 .

[164]  Huakun Liu,et al.  Electrochemical and thermal properties of 2,4,6-tris(trifluoromethyl)-1,3,5-triazine as a flame retardant additive in Li-ion batteries , 2009 .

[165]  J. Yamaki,et al.  Electrochemical Behavior of LiM0.25Ni0.25Mn1.5O4 as 5 V Cathode Materials for Lithium Rechargeable Batteries , 2009 .

[166]  Xiqian Yu,et al.  Needle-like LiFePO4 thin films prepared by an off-axis pulsed laser deposition technique , 2009 .

[167]  Sang Hyo Lee,et al.  Electrochemical properties of mixed cathode consisting of μm-sized LiCoO2 and nm-sized Li[Co0.1Ni0.15Li0.2Mn0.55]O2 in lithium rechargeable batteries , 2009 .

[168]  A. Manthiram,et al.  Effect of surface modifications on the layered solid solution cathodes (1 − z) Li[Li1/3Mn2/3]O2 − (z) Li[Mn0.5 − yNi0.5 − yCo2y]O2 , 2009 .

[169]  Ju-tang Sun,et al.  Synthesis and electrochemical properties of LiNi0.9Co0.1O2 cathode material for lithium secondary battery , 2009 .

[170]  Daniel P. Abraham,et al.  Structural characteristics and electrochemical performance of layered Li[Mn0.5−xCr2xNi0.5−x]O2 cathode materials , 2009 .

[171]  Itaru Honma,et al.  Synthesis of single crystalline spinel LiMn2O4 nanowires for a lithium ion battery with high power density. , 2009, Nano letters.

[172]  Takashi Ida,et al.  Isolation of Solid Solution Phases in Size‐Controlled LixFePO4 at Room Temperature , 2009 .

[173]  Chunsheng Wang,et al.  Vanadium Modified LiFePO4 Cathode for Li-Ion Batteries , 2009 .

[174]  Jean-Marie Tarascon,et al.  Eco-Efficient Synthesis of LiFePO4 with Different Morphologies for Li-Ion Batteries , 2009 .

[175]  Arumugam Manthiram,et al.  One-Pot Microwave-Hydrothermal Synthesis and Characterization of Carbon-Coated LiMPO4 (M = Mn , Fe, and Co) Cathodes , 2009 .

[176]  R. Basu,et al.  Lanthanum-doped LiCoO2 cathode with high rate capability , 2009 .

[177]  Yasuhiro Harada,et al.  Electrochemical Kinetics and Safety of 2-Volt Class Li-Ion Battery System Using Lithium Titanium Oxide Anode , 2009 .

[178]  P. Manisankar,et al.  Synthesis and electrochemical characterizations of nano-crystalline LiFePO4 and Mg-doped LiFePO4 cathode materials for rechargeable lithium-ion batteries , 2009 .

[179]  K. Tadanaga,et al.  Electrochemical Analysis of Li4Ti5O12 Electrode in All-Solid-State Lithium Secondary Batteries , 2009 .

[180]  M. Doeff,et al.  FTIR and Raman Study of the LixTiyMn1-yO2 (y = 0, 0.11) Cathodes in Methylpropyl Pyrrolidinium Bis(fluoro-sulfonyl)imide, LiTFSI Electrolyte , 2009 .

[181]  Yi Cui,et al.  Electrochemical behavior of LiCoO2 as aqueous lithium-ion battery electrodes , 2009 .

[182]  Aurelien Du Pasquier,et al.  Nano Li4Ti5O12–LiMn2O4 batteries with high power capability and improved cycle-life , 2009 .

[183]  J. Dahn,et al.  Preparation of Co1−zAlz(OH)2(NO3)z Layered Double Hydroxides and Li(Co1−zAlz)O2 , 2009 .

[184]  Arumugam Manthiram,et al.  High capacity Li[Li0.2Mn0.54Ni0.13Co0.13]O2–V2O5 composite cathodes with low irreversible capacity loss for lithium ion batteries , 2009 .

[185]  Zhen Zhou,et al.  Fast synthesis of core-shell LiCoPO4/C nanocomposite via microwave heating and its electrochemical Li intercalation performances , 2009 .

[186]  Yong‐Mook Kang,et al.  Effects of Fe doping on the electrochemical performance of LiCoPO4/C composites for high power-density cathode materials , 2009 .

[187]  Tingfeng Yi,et al.  Structure and electrochemical performance of Li4Ti5O12-coated LiMn1.4Ni0.4Cr0.2O4 spinel as 5 V materials , 2009 .

[188]  K. Tadanaga,et al.  Modification of Interface Between LiCoO2 Electrode and Li2S – P2S5 Solid Electrolyte Using Li2O – SiO2 Glassy Layers , 2009 .

[189]  A. Manthiram,et al.  Improved Electrochemical Performance of the 5 V Spinel Cathode LiMn1.5Ni0.42Zn0.08O4 by Surface Modification , 2009 .

[190]  Tingfeng Yi,et al.  Comparison of structure and electrochemical properties for 5 V LiNi0.5Mn1.5O4 and LiNi0.4Cr0.2Mn1.4O4 cathode materials , 2009 .

[191]  François Weill,et al.  C-containing LiFePO4 materials — Part II: Electrochemical characterization , 2008 .

[192]  Preparation, characteristics and electrochemical properties of surface-modified LiMn2O4 by doped LiNi0.05Mn1.95O4 , 2008 .

[193]  J. Xie,et al.  Li-ion diffusion kinetics in LiMn2O4 thin films prepared by pulsed laser deposition , 2008 .

[194]  Daniel P. Abraham,et al.  First-cycle irreversibility of layered Li–Ni–Co–Mn oxide cathode in Li-ion batteries , 2008 .

[195]  Yuliang Cao,et al.  Enhanced electrochemical stability of Al-doped LiMn2O4 synthesized by a polymer-pyrolysis method , 2008 .

[196]  Feng Wu,et al.  Synthesis and properties of high tap-density cathode material for lithium ion battery by the eutectic molten-salt method , 2008 .

[197]  G. P. Kalaignan,et al.  Synthesis and electrochemical characterizations of Nano-SiO2-coated LiMn2O4 cathode materials for rechargeable lithium batteries , 2008 .

[198]  J. Prakash,et al.  Effects of Metal Ions on the Structural and Thermal Stabilities of Li [ Ni1 − x − y Co x Mn y ] O2 ( x + y ⩽ 0.5 ) Studied by In Situ High Temperature XRD , 2008 .

[199]  K. Kanamura,et al.  Hydrothermal Synthesis of Carbon-Coated LiFePO4 and Its Application to Lithium Polymer Battery , 2008 .

[200]  I. Taniguchi,et al.  Preparation of LiFePO4/C composite powders by ultrasonic spray pyrolysis followed by heat treatment and their electrochemical properties , 2008 .

[201]  Jiulin Wang,et al.  Fluorine-doped LiNi0.5Mn1.5O4 for 5 V cathode materials of lithium-ion battery , 2008 .

[202]  L. Croguennec,et al.  Raman and FTIR Spectroscopy Investigations of Carbon-Coated Li x FePO4 Materials , 2008 .

[203]  Y. Park,et al.  Electrochemical behaviors of Li[Li(1-x)/3Mn(2-x)/3Nix/3Cox/3]O2 cathode series (0 < x < 1) synthesized by sucrose combustion process for high capacity lithium ion batteries , 2008 .

[204]  Y. Kang,et al.  LiCo1−xAlxO2 (0 ≤ x ≤ 0.05) cathode powders prepared from the nanosized Co1−xAlxOy precursor powders , 2008 .

[205]  P. Bruce,et al.  Synthesis of ordered mesoporous Li-Mn-O spinel as a positive electrode for rechargeable lithium batteries. , 2008, Angewandte Chemie.

[206]  Tingfeng Yi,et al.  Density functional theory study of lithium intercalation for 5 V LiNi0.5Mn1.5O4 cathode materials , 2008 .

[207]  Jie Xiao,et al.  Layered Mixed Transition Metal Oxide Cathodes with Reduced Cobalt Content for Lithium Ion Batteries , 2008 .

[208]  T. Wu,et al.  Preparation and electrochemical characteristics of spherical spinel cathode powders via an ultrasonic spray pyrolysis process , 2008 .

[209]  John B. Goodenough,et al.  High-Rate LiFePO4 Lithium Rechargeable Battery Promoted by Electrochemically Active Polymers , 2008 .

[210]  S. Ye,et al.  Synthesis and Electrochemical Properties of Nanosized Li x MnO2 as Cathode Materials for Lithium Batteries , 2008 .

[211]  G. Amatucci,et al.  Thermodynamically Induced Surface Modification for the Stabilization of High-Capacity LiCoO2 , 2008 .

[212]  Guoying Chen,et al.  Improving the Performance of Lithium Manganese Phosphate Through Divalent Cation Substitution , 2008 .

[213]  Pedro E. Arce,et al.  Discharge Model for LiFePO4 Accounting for the Solid Solution Range , 2008 .

[214]  C. Delmas,et al.  On “Really” Stoichiometric LiCoO2 , 2008 .

[215]  Yasuo Takeda,et al.  Electrochemical performances for preferred oriented PLD thin-film electrodes of LiNi0.8Co0.2O2, LiFePO4 and LiMn2O4 , 2008 .

[216]  M Stanley Whittingham,et al.  Inorganic nanomaterials for batteries. , 2008, Dalton transactions.

[217]  P. Bruce,et al.  Nano-LiNi(0.5)Mn(1.5)O(4) spinel: a high power electrode for Li-ion batteries. , 2008, Dalton transactions.

[218]  C. Delmas,et al.  X-Ray Photoelectron Spectroscopy Investigations of Carbon-Coated LixFePO4 Materials , 2008 .

[219]  Claus Daniel,et al.  Materials and processing for lithium-ion batteries , 2008 .

[220]  Mo-hua Yang,et al.  Effects of TiO2 coating on high-temperature cycle performance of LiFePO4-based lithium-ion batteries , 2008 .

[221]  Haowen Liu,et al.  The low cost synthesis of nanoparticles LiFePO4/C composite for lithium rechargeable batteries , 2008 .

[222]  J. Yamaki,et al.  Surface modification of LiNi1/2Mn3/2O4 thin-films by zirconium alkoxide/PMMA composites and their effects on electrochemical properties , 2008 .

[223]  I. Saadoune,et al.  Chromium doping as a new approach to improve the cycling performance at high temperature of 5 V LiNi0.5Mn1.5O4-based positive electrode , 2008 .

[224]  K. Nahm,et al.  Electrochemical studies on cathode blends of LiMn2O4 and Li[Li1/15Ni1/5Co2/5Mn1/3O2] , 2008 .

[225]  L. Kang,et al.  Electrochemical study on LiCo1/6Mn11/6O4 as cathode material for lithium ion batteries at elevated temperature , 2008 .

[226]  Jaephil Cho,et al.  PVP-Assisted ZrO2 coating on LiMn2O4 spinel cathode nanoparticles prepared by MnO2 nanowire templates , 2008 .

[227]  G. Fey,et al.  High-power LiFePO4 cathode materials with a continuous nano carbon network for lithium-ion batteries , 2008 .

[228]  Zhanxu Yang,et al.  Pillared layered Li1−2xCaxCoO2 cathode materials obtained by cationic exchange under hydrothermal conditions , 2008 .

[229]  Yong Yang,et al.  Structural and electrochemical characterization of xLi[Li1/3Mn2/3]O2·(1 − x)Li[Ni1/3Mn1/3Co1/3]O2 (0 ≤ x ≤ 0.9) as cathode materials for lithium ion batteries , 2008 .

[230]  Zaiping Guo,et al.  Synthesis of spherical porous vanadium pentoxide and its electrochemical properties , 2008 .

[231]  Performance improvement of LiMn2O4 as cathode material for lithium ion battery with bismuth modification , 2008 .

[232]  G. Fey,et al.  Electrochemical performance of LiCoO2 cathodes by surface modification using lanthanum aluminum garnet , 2008 .

[233]  Zhixing Wang,et al.  Effect of carbon nanotube on the electrochemical performance of C-LiFePO4/graphite battery , 2008 .

[234]  Hal-Bon Gu,et al.  Electrochemical properties of LiFePO4-multiwalled carbon nanotubes composite cathode materials for lithium polymer battery , 2008 .

[235]  Shaohua Guo,et al.  Synthesis and Characterization of Sn-Doped LiMn2O4 Cathode Materials for Rechargeable Li-Ion Batteries , 2008 .

[236]  H. Pan,et al.  Effects of carbon coating and iron phosphides on the electrochemical properties of LiFePO4/C , 2008 .

[237]  Guangchuan Liang,et al.  Lithium iron phosphate with high-rate capability synthesized through hydrothermal reaction in glucose solution , 2008 .

[238]  Guangchuan Liang,et al.  Effects of magnesium doping on electronic conductivity and electrochemical properties of LiFePO4 prepared via hydrothermal route , 2008 .

[239]  Zhixing Wang,et al.  LiFePO4 with enhanced performance synthesized by a novel synthetic route , 2008 .

[240]  H. Fang,et al.  Low-temperature synthesis of highly crystallized LiMn2O4 from alpha manganese dioxide nanorods☆ , 2008 .

[241]  Zhixing Wang,et al.  Synthesis and electrochemical properties of olivine LiFePO4 prepared by a carbothermal reduction method , 2008 .

[242]  Yong Yang,et al.  The Effects of AlF3 Coating on the Performance of Li [ Li0.2Mn0.54Ni0.13Co0.13 ] O2 Positive Electrode Material for Lithium-Ion Battery , 2008 .

[243]  Yang‐Kook Sun,et al.  Improvement of the Electrochemical Properties of Li [ Ni0.5Mn0.5 ] O2 by AlF3 Coating , 2008 .

[244]  Mu-Rong Yang,et al.  The Doping Effect on the Electrochemical Properties of LiFe0.95M0.05PO4 (M = Mg2 + , Ni2 + , Al3 + , or V3 + ) as Cathode Materials for Lithium-Ion Cells , 2008 .

[245]  Xugeng Guo,et al.  The effects of TiO2 coating on the electrochemical performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode material for lithium-ion battery , 2008 .

[246]  S. Ji,et al.  Influence of different morphologies on electrochemical performance of spinel LiMn2O4 , 2008 .

[247]  Z. Wen,et al.  High rate electrode materials for lithium ion batteries , 2008 .

[248]  S. Ji,et al.  Influence of carbon sources on electrochemical performances of LiFePO4/C composites , 2008 .

[249]  T. Moriga,et al.  Lithium ionic diffusion in lithium cobalt oxides prepared by mechanical milling , 2008 .

[250]  Z. Wen,et al.  Electrochemical properties of carbon-coated Li[Ni1/3Co1/3Mn1/3]O2 cathode material for lithium-ion batteries , 2008 .

[251]  M. Osada,et al.  Interfacial modification for high-power solid-state lithium batteries , 2008 .

[252]  Dmitry Belov,et al.  Investigation of the kinetic mechanism in overcharge process for Li-ion battery , 2008 .

[253]  N. Kosova,et al.  Surface chemistry study of LiCoO2 coated with alumina , 2008 .

[254]  Jing-ying Xie,et al.  Synthesis and characterization of LiFePO4/(C + Fe2P) composite cathodes , 2008 .

[255]  Xianjun Zhu,et al.  Synthesis and characteristics of Li3V2(PO4)3 as cathode materials for lithium-ion batteries , 2008 .

[256]  Linda F. Nazar,et al.  Proof of Supervalent Doping in Olivine LiFePO4 , 2008 .

[257]  W. Craig Carter,et al.  Electrochemically Induced Phase Transformation in Nanoscale Olivines Li1−xMPO4 (M = Fe, Mn) , 2008 .

[258]  John T. Vaughey,et al.  Synthesis, Characterization and Electrochemistry of Lithium Battery Electrodes: xLi2MnO3·(1 − x)LiMn0.333Ni0.333Co0.333O2 (0 ≤ x ≤ 0.7) , 2008 .

[259]  M. Lai,et al.  Study on Li+-ion diffusion in nano-crystalline LiMn2O4 thin film cathode grown by pulsed laser deposition using CV, EIS and PITT techniques , 2008 .

[260]  J. Dahn,et al.  The Effect of Al Substitution on the Reactivity of Delithiated LiNi ( 0.5 − z ) Mn ( 0.5 − z ) A12z O2 with Nonaqueous Electrolyte , 2008 .

[261]  J. Newman,et al.  Modeling the Performance of Lithium-Ion Batteries and Capacitors during Hybrid-Electric-Vehicle Operation , 2008 .

[262]  Zhanxu Yang,et al.  Effect of FePO4 coating on electrochemical and safety performance of LiCoO2 as cathode material for Li-ion batteries , 2008 .

[263]  Jiangfeng Xiang,et al.  A simple and effective strategy to synthesize Al2O3-coated LiNi0.8Co0.2O2 cathode materials for lithium ion battery , 2008 .

[264]  Xiqian Yu,et al.  Li-storage in LiFe1/4Mn1/4Co1/4Ni1/4PO4 solid solution , 2008 .

[265]  A. Manthiram,et al.  Structural stability of chemically delithiated layered (1 − z)Li[Li1/3Mn2/3]O2–zLi[Mn0.5−yNi0.5−yCo2y]O2 solid solution cathodes , 2008 .

[266]  Arumugam Manthiram,et al.  Surface Modification of High Capacity Layered Li [ Li0.2Mn0.54Ni0.13Co0.13 ] O2 Cathodes by AlPO4 , 2008 .

[267]  Feng Wu,et al.  Synthesis and Characterization of Nonspherical LiCoO2 with High Tap Density by Two-Step Drying Method , 2008 .

[268]  M. Doeff,et al.  Microwave Plasma Chemical Vapor Deposition of Carbon Coatings on LiNi1 ∕ 3Co1 ∕ 3Mn1 ∕ 3O2 for Li-Ion Battery Composite Cathodes , 2008 .

[269]  P. Aranda,et al.  Preparation and properties as positive electrodes of PANI–LiNi0.8Co0.2O2 nanocomposites , 2008 .

[270]  R. Basu,et al.  Effect of silver addition on the properties of combustion synthesized nanocrystalline LiCoO2 , 2008 .

[271]  Electrochemical performance of ZnO-coated LiMn1.5Ni0.5O4 cathode material , 2008 .

[272]  P. Bruce,et al.  A Stoichiometric Nano-LiMn2O4 Spinel Electrode Exhibiting High Power and Stable Cycling , 2008 .

[273]  Ji-Won Choi,et al.  Issue and challenges facing rechargeable thin film lithium batteries , 2008 .

[274]  D. Gregory,et al.  Phthalic acid assisted nano-sized spinel LiMn2O4 and LiCrxMn2−xO4 (x=0.00–0.40) via sol–gel synthesis and its electrochemical behaviour for use in Li-ion-batteries , 2008 .

[275]  Jin-Song Hu,et al.  Nanostructured Materials for Electrochemical Energy Conversion and Storage Devices , 2008 .

[276]  A. Jalbout,et al.  Effect of Polyacenic Semiconductors on the Performance of Olivine LiFePO4 , 2008 .

[277]  Wei Zeng,et al.  Fabrication and Electrochemical Properties of Three-Dimensional Structure of LiCoO2 Fibers , 2008 .

[278]  Dmitry Belov,et al.  Failure mechanism of Li-ion battery at overcharge conditions , 2008 .

[279]  Jou‐Hyeon Ahn,et al.  Electrochemical properties of LiFePO4/C synthesized by mechanical activation using sucrose as carbon source , 2008 .

[280]  T. R. Jow,et al.  Analysis of the FePO4 to LiFePO4 phase transition , 2008 .

[281]  S. Franger,et al.  Chemistry and electrochemistry of lithium iron phosphate , 2008 .

[282]  Yong Yang,et al.  Electrochemical characterization of two types of PEO-based polymer electrolytes with room-temperature ionic liquids , 2008 .

[283]  P. Biensan,et al.  Mechanisms Associated with the “Plateau” Observed at High Voltage for the Overlithiated Li1.12(Ni0.425Mn0.425Co0.15)0.88O2 System , 2008 .

[284]  M. Doeff,et al.  Impact of carbon structure and morphology on the electrochemical performance of LiFePO4/C composites , 2008 .

[285]  Shin Fujitani,et al.  Development of Lithium-Ion Batteries with a LiCoO2 Cathode Toward High Capacity by Elevating Charging Potential , 2008 .

[286]  Y. Idemoto,et al.  Thermodynamic stability, crystal structure, and cathodic performance of Lix(Mn1/3Co1/3Ni1/3)O2 depend on the synthetic process and Li content , 2008 .

[287]  Jiangfeng Xiang,et al.  Rheological Phase Synthesis and Electrochemical Properties of Mg-Doped LiNi0.8Co0.2O2 Cathode Materials for Lithium-Ion Battery , 2008 .

[288]  J. Sanz,et al.  Three-Dimensionally Ordered Macroporous Lithium Manganese Oxide for Rechargeable Lithium Batteries , 2008 .

[289]  Chong Seung Yoon,et al.  Synthesis of Nanowire and Hollow LiFePO4 Cathodes for High-Performance Lithium Batteries , 2008 .

[290]  Ying Wang,et al.  Developments in Nanostructured Cathode Materials for High‐Performance Lithium‐Ion Batteries , 2008 .

[291]  K. Du,et al.  Synthesis and electrochemical properties of Co,Mn-coated LiNiO2 lithium-ion battery cathode materials , 2008 .

[292]  C. Grey,et al.  Molten Salt Synthesis and High Rate Performance of the “Desert‐Rose” form of LiCoO2 , 2008 .

[293]  K. Nikolowski,et al.  Thermal Stability of LiCoPO4 Cathodes , 2008 .

[294]  M. Yoshio,et al.  Capacity fading with oxygen loss for manganese spinels upon cycling at elevated temperatures , 2008 .

[295]  Yang‐Kook Sun,et al.  The Effect of Morphological Properties on the Electrochemical Behavior of High Tap Density C – LiFePO4 Prepared via Coprecipitation , 2008 .

[296]  Á. Caballero,et al.  PMMA-assisted synthesis of Li1−xNi0.5Mn1.5O4−δ for high-voltage lithium batteries with expanded rate capability at high cycling temperatures , 2008 .

[297]  N. Kosova,et al.  Effect of electronic state of ions on the electrochemical properties of layered cathode materials LiNi1−2xCoxMnxO2 , 2008 .

[298]  M. Mitrić,et al.  Synthesis and characterization of LiFePO4/C composite obtained by sonochemical method , 2008 .

[299]  Shunyi Yang,et al.  Synthesis and electrochemical properties of monoclinic Li3V2(PO4)3/C composite cathode material prepared from a sucrose-containing precursor , 2008 .

[300]  Y. Takeda,et al.  Effect of CO2 on Layered Li1+zNi1-x-yCoxMyO2 (M=Al,Mn) Cathode Materials , 2008 .

[301]  M. Doeff,et al.  Characterization and Electrochemical Performance of Substituted LiNi0.4Co0.2-yAlyMn0.4O2 (0{less than or equal to}y{less than or equal to}0.2) Cathode Materials , 2008 .

[302]  G. Amatucci,et al.  Electrochemical Performance of Nanostructured LiMn1.5Ni0.5O4 Spinel at Elevated Temperature , 2008 .

[303]  Minoru Inaba,et al.  Electrochemical AFM study of LiMn2O4 thin film electrodes exposed to elevated temperatures , 2008 .

[304]  J. Xie,et al.  Li-ion transport kinetics in LiMn2O4 thin films prepared by radio frequency magnetron sputtering , 2008 .

[305]  Yong‐Mook Kang,et al.  Amphoteric effects of Fe2P on electrochemical performance of lithium iron phosphate-carbon composite synthesized by ball-milling and microwave heating , 2008 .

[306]  Dennis W. Dees,et al.  Effect of electrolyte composition on initial cycling and impedance characteristics of lithium-ion cells , 2008 .

[307]  Jian Xie,et al.  Orientation dependence of Li-ion diffusion kinetics in LiCoO2 thin films prepared by RF magnetron sputtering , 2008 .

[308]  H. Jang,et al.  Improvement of capacity fading resistance of LiMn2O4 by amphoteric oxides , 2008 .

[309]  W. Jaegermann,et al.  Synthesis and characterization of Carbon Nano Fiber/LiFePO4 composites for Li-ion batteries , 2008 .

[310]  H. Y. Xu,et al.  Synthesis of Li[Li0.2Ni0.2Mn0.6]O2 by radiated polymer gel method and impact of deficient Li on its structure and electrochemical properties , 2008 .

[311]  Jenn‐Ming Yang,et al.  Phase Transformation of Nanocrystalline LiCoO2 Cathode After High-Temperature Cycling , 2008 .

[312]  Structural changes of bare and AlPO4-coated LixCoO2 (x = 0.24 and 0.1) upon thermal annealing ≥200°C , 2008 .

[313]  Seung‐Wan Song,et al.  Structural Changes in a Thin-Film Lithium Battery during Initial Cycling , 2008 .

[314]  Yang-Kook Sun,et al.  Structural, Electrochemical, and Thermal Aspects of Li [ ( Ni0.5Mn0.5 ) 1 − x Co x ] O2 ( 0 ≤ x ≤ 0.2 ) for High-Voltage Application of Lithium-Ion Secondary Batteries , 2008 .

[315]  S. Moon,et al.  A study on carbon-coated LiNi1/3Mn1/3Co1/3O2 cathode material for lithium secondary batteries , 2008 .

[316]  Y. Park,et al.  High-rate, high capacity ZrO2 coated Li[Li1/6Mn1/2Co1/6Ni1/6]O2 for lithium secondary batteries , 2008 .

[317]  Ki-won Kim,et al.  Optimized solid-state synthesis of LiFePO4 cathode materials using ball-milling , 2008 .

[318]  K. Amine,et al.  Electrochemical and thermal characterization of AlF3-coated Li[Ni0.8Co0.15Al0.05]O2 cathode in lithium-ion cells , 2008 .

[319]  P. Bruce,et al.  Nanomaterials for rechargeable lithium batteries. , 2008, Angewandte Chemie.

[320]  Feng Zhang,et al.  Effects of Mg doping on the electrochemical properties of LiNi0.8Co0.2O2 cathode material , 2008 .

[321]  Yu Zuolong,et al.  The effect of different kinds of nano-carbon conductive additives in lithium ion batteries on the resistance and electrochemical behavior of the LiCoO2 composite cathodes , 2008 .

[322]  Ki-won Kim,et al.  A study on the electrochemical characteristics of LiFePO4 cathode for lithium polymer batteries by hydrothermal method , 2008 .

[323]  Yongku Kang,et al.  Study on cycling performances of lithium-ion polymer cells assembled by in situ chemical cross-linking with star-shaped siloxane acrylate , 2008 .

[324]  G. Fey,et al.  Morphological characterization of LiFePO4/C composite cathode materials synthesized via a carboxylic acid route , 2008 .

[325]  Ruhul Amin,et al.  Defect Chemistry of LiFePO4 , 2008 .

[326]  M. Thackeray,et al.  Stabilization of xLi2MnO3 ⋅ ( 1 − x ) LiMO2 Electrode Surfaces ( M = Mn , Ni , Co ) with Mildly Acidic, Fluorinated Solutions , 2008 .

[327]  M. Stanley Whittingham,et al.  Materials Challenges Facing Electrical Energy Storage , 2008 .

[328]  K. Zaghib,et al.  Magnetic studies of phospho-olivine electrodes in relation with their electrochemical performance in Li-ion batteries , 2008 .

[329]  N. Sinha,et al.  Synthesis and characterization of submicron size particles of LiMn2O4 by microemulsion route , 2008 .

[330]  Y. Kang,et al.  Fine-sized LiNi0.8Co0.15Mn0.05O2 cathode powders prepared by combined process of gas-phase reaction and solid-state reaction methods , 2008 .

[331]  Huakun Liu,et al.  Electrochemical studies on LiFe1-xCoxPO4/carbon composite cathode materials synthesized by citrate gel technique for lithium-ion batteries , 2008 .

[332]  Yunhong Zhou,et al.  Synthesis of LiNi1/3Co1/3Mn1/3O2 as a cathode material for lithium battery by the rheological phase method , 2008 .

[333]  H. Kao,et al.  Physical and electrochemical properties of La-doped LiFePO4/C composites as cathode materials for lithium-ion batteries , 2008 .

[334]  M. Doeff,et al.  Electrode Materials with the Na0.44MnO2 Structure: Effect ofTitanium Substitution on Physical and Electrochemical Properties , 2008 .

[335]  D. Xia,et al.  Investigation of High-Rate Spherical LiCoO2 with Mesoporous Structure via Self-Assembly in Microemulsion , 2008 .

[336]  M. Doeff,et al.  TEM Study of Fracturing in Spherical and Plate-like LiFePO4 Particles , 2008 .

[337]  Phl Peter Notten,et al.  Studies on the degradation of Li-ion batteries by the use of microreference electrodes , 2008 .

[338]  M. Nakayama,et al.  Lithium AlPO4 composite polymer battery with nanostructured LiMn2O4 cathode , 2008 .

[339]  Venkat Srinivasan,et al.  Optimizing the Performance of Lithium Titanate Spinel Paired with Activated Carbon or Iron Phosphate , 2008 .

[340]  K. Zaghib,et al.  Dual active material composite cathode structures for Li-ion batteries , 2008 .

[341]  Yunhong Zhou,et al.  Synthesis and electrochemical properties of LiNi0.85 − xCoxMn0.15O2 as cathode materials for lithium-ion batteries , 2008 .

[342]  P. Biensan,et al.  Optimized Chemical Stability and Electrochemical Performance of LiFePO4 Composite Materials Obtained by ZnO Coating , 2008 .

[343]  Jaephil Cho,et al.  M3 ( PO4 ) 2-Nanoparticle-Coated LiCoO2 vs LiCo0.96M0.04O2 ( M = Mg and Zn ) on Electrochemical and Storage Characteristics , 2008 .

[344]  H. Gu,et al.  Preparation and characterization of LiFePO4 cathode materials by hydrothermal method , 2008 .

[345]  J. Maier,et al.  Effect of annealing on transport properties of LiFePO4: Towards a defect chemical model , 2008 .

[346]  K. Amine,et al.  Physical and electrochemical properties of spherical Li1+x(Ni1/3Co1/3Mn1/3)1−xO2 cathode materials , 2008 .

[347]  H. Şahan,et al.  The effect of LBO coating method on electrochemical performance of LiMn2O4 cathode material , 2008 .

[348]  Feng Wu,et al.  Carboxylic acid-assisted solid-state synthesis of LiFePO4/C composites and their electrochemical properties as cathode materials for lithium-ion batteries , 2008 .

[349]  P. Novák,et al.  Direct evidence of oxygen evolution from Li1+x(Ni1/3Mn1/3Co1/3)1−xO2 at high potentials , 2008 .

[350]  M. Armand,et al.  Building better batteries , 2008, Nature.

[351]  M. Doeff,et al.  Compatibility of Li x Ti y Mn1 − y O2 ( y = 0 , 0.11 ) Electrode Materials with Pyrrolidinium-Based Ionic Liquid Electrolyte Systems , 2008 .

[352]  Jing Liang,et al.  Template-Directed Materials for Rechargeable Lithium-Ion Batteries† , 2008 .

[353]  Ping He,et al.  Lithium-Ion Intercalation Behavior of LiFePO4 in Aqueous and Nonaqueous Electrolyte Solutions , 2008 .

[354]  Wanxi Zhang,et al.  Effect of different carbon conductive additives on electrochemical properties of LiFePO4-C/Li batteries , 2008 .

[355]  Hyeong-Jin Kim,et al.  Expanding performance limit of lithium-ion batteries simply by mixing Al(OH)3 powder with LiCoO2 , 2008 .

[356]  Bin Zhang,et al.  Effect of equivalent and non-equivalent Al substitutions on the structure and electrochemical properties of LiNi0.5Mn0.5O2 , 2008 .

[357]  Hong Wang,et al.  PVDF-HFP composite polymer electrolyte with excellent electrochemical properties for Li-ion batteries , 2008 .

[358]  Yunhong Zhou,et al.  Synthesis and characterization of LiNi1−xCoxO2 for lithium batteries by a novel method , 2008 .

[359]  Peter Y. Zavalij,et al.  The hydrothermal synthesis and characterization of olivines and related compounds for electrochemical applications , 2008 .

[360]  Xifei Li,et al.  Enhanced cycling performance of spinel LiMn2O4 coated with ZnMn2O4 shell , 2008 .

[361]  Seung-wook Eom,et al.  Thermal and electrochemical behaviour of C/LixCoO2 cell during safety test , 2008 .

[362]  Z. Wen,et al.  Morphology and electrochemical performance of Li[Ni1/3Co1/3Mn1/3]O2 cathode material by a slurry spray drying method , 2008 .

[363]  S. Moon,et al.  Diphenyloctyl phosphate as a flame-retardant additive in electrolyte for Li-ion batteries , 2008 .

[364]  Nancy J. Dudney,et al.  Thin Film Micro-Batteries , 2008 .

[365]  S. Ye,et al.  Synthesis and Electrochemical Properties of Nanosized LixMnO2 as Cathode Materials for Lithium Batteries , 2008 .

[366]  Atsushi Sakuda,et al.  Improvement of High-Rate Performance of All-Solid-State Lithium Secondary Batteries Using LiCoO2 Coated with Li2O-SiO2 Glasses , 2008 .

[367]  Yo Kobayashi,et al.  Configurational Entropy of Lithium Manganese Oxide and Related Materials, LiCr y Mn2 − y O4 ( y = 0 , 0.3 ) , 2008 .

[368]  I. Willner,et al.  Titelbild: Increasing the Complexity of Periodic Protein Nanostructures by the Rolling‐Circle‐Amplified Synthesis of Aptamers (Angew. Chem. 1/2008) , 2008 .

[369]  Jung-Min Kim,et al.  Synthesis, Structure, and Electrochemical Characteristics of Overlithiated Li1 + x ( Ni z Co1 − 2z Mn z ) 1 − x O2 (z = 0.1 – 0.4 and x = 0.0 – 0.1) Positive Electrodes Prepared by Spray-Drying Method , 2008 .

[370]  R. Holze,et al.  Effects of heteroatoms on doped LiFePO4/C composites , 2008 .

[371]  A. Manthiram,et al.  Chemical and structural instability of the chemically delithiated (1 – z) Li[Li1/3Mn2/3]O2·(z) Li[Co1–yNiy]O2 (0 ≤ y ≤ 1 and 0 ≤ z ≤ 1) solid solution cathodes , 2008 .

[372]  T. Abe,et al.  Electrochemical STM observation of Li1+xMn2-xO4 thin films prepared by pulsed laser deposition , 2008 .

[373]  T. P. Kumar,et al.  Materials for next-generation lithium batteries , 2008 .

[374]  Bruce Dunn,et al.  Rethinking Multifunction in Three Dimensions for Miniaturizing Electrical Energy Storage , 2008 .

[375]  Fred Roozeboom,et al.  3‐D Integrated All‐Solid‐State Rechargeable Batteries , 2007 .

[376]  T. Fang,et al.  Reassessment of the Electronic-Conduction Behavior above the Verwey-Like Transition of Ni2+- and Al3+-Doped LiMn2O4 , 2007 .

[377]  M. Shikano,et al.  Material design concept for Fe-substituted Li2MnO3-based positive electrodes , 2007 .

[378]  Yang-Kook Sun,et al.  On the Safety of the Li4Ti5O12 ∕ LiMn2O4 Lithium-Ion Battery System , 2007 .

[379]  J. Wilcox.  Characterization and Electrochemical Performance of SubstitutedLiNi0.4Co0.2-yAlyMn0.4O2 (0<_y<_0.2) Cathode Materials , 2007 .

[380]  Liquan Chen,et al.  New concept of surface modification to LiCoO2 , 2007 .

[381]  Chia‐Chen Li,et al.  A novel and efficient water-based composite binder for LiCoO2 cathodes in lithium-ion batteries , 2007 .

[382]  J. Molenda,et al.  Electrochemical and high temperature physicochemical properties of orthorhombic LiMnO2 , 2007 .

[383]  J. Molenda,et al.  Studies of selected synthesis procedures of the conducting LiFePO4-based composite cathode materials for Li-ion batteries , 2007 .

[384]  Yong Yang,et al.  Reaction mechanism and kinetics of lithium ion battery cathode material LiNiO2 with CO2 , 2007 .

[385]  Dali Mao,et al.  Phase conversion and morphology evolution during hydrothermal preparation of orthorhombic LiMnO2 nanorods for lithium ion battery application , 2007 .

[386]  Lihong Yu,et al.  Synthesis and electrochemical characterization of carbon-coated nanocrystalline LiFePO4 prepared by polyacrylates-pyrolysis route , 2007 .

[387]  Dong-Qiang Liu,et al.  The elevated temperature performance of LiMn2O4 coated with Li4Ti5O12 for lithium ion battery , 2007 .

[388]  J. Tu,et al.  Effects of abundant Co doping on the structure and electrochemical characteristics of LiMn1.5Ni0.5- xCoxO4 , 2007 .

[389]  X. Ji,et al.  Synthesis and characterization of LiCo0.3RhxNi0.7−xO2 (0≤ x ≤0.003) cathode materials for lithium ion batteries , 2007 .

[390]  B. Scrosati,et al.  Li-LiFePO4 rechargeable polymer battery using dual composite polymer electrolytes , 2007 .

[391]  Xifei Li,et al.  Spinel LiMn2O4 active material with high capacity retention , 2007 .

[392]  Bruno Scrosati,et al.  Recent advances in liquid and polymer lithium-ion batteries , 2007 .

[393]  John T. Vaughey,et al.  Li{sub2}MnO{sub3}-stabilized LiMO{sub2} (M=Mn, Ni, Co) electrodes for high energy lithium-ion batteries , 2007 .

[394]  Yuliang Cao,et al.  Enhanced electrochemical performance of submicron LiCoO2 synthesized by polymer pyrolysis method , 2007 .

[395]  Ki-won Kim,et al.  Effect of different conductive additives on charge/discharge properties of LiCoPO4/Li batteries , 2007 .

[396]  M. Shikano,et al.  Optimizing Chemical Composition and Preparation Conditions for Fe -Substituted Li2MnO3 Positive Electrode Material , 2007 .

[397]  Yun Chen,et al.  Electrochemical properties of LiFePO4 prepared via ball-milling , 2007 .

[398]  Fangfang Liu,et al.  LiCoO2–MgO coaxial fibers: co-electrospun fabrication, characterization and electrochemical properties , 2007 .

[399]  Jian-qing Zhang,et al.  Electrochemical performance of the carbon coated Li3V2(PO4)3 cathode material synthesized by a sol-gel method , 2007 .

[400]  T. Nakajima.  Surface modification of carbon anodes for secondary lithium battery by fluorination , 2007 .

[401]  G. Amatucci,et al.  Fluoride based electrode materials for advanced energy storage devices , 2007 .

[402]  Steen B. Schougaard,et al.  Conducting‐Polymer/Iron‐Redox‐ Couple Composite Cathodes for Lithium Secondary Batteries , 2007 .

[403]  Zi‐Feng Ma,et al.  Synthesis of LiNi1/3Co1/3Mn1/3O2- zFz cathode material from oxalate precursors for lithium ion battery , 2007 .

[404]  Charles R. Martin,et al.  Nanomaterials in Li-Ion Battery Electrode Design , 2007 .

[405]  Donghan Kim,et al.  Synthesis of LiFePO4 Nanoparticles in Polyol Medium and Their Electrochemical Properties , 2006 .

[406]  L. Nazar,et al.  Small polaron hopping in Li(x)FePO4 solid solutions: coupled lithium-ion and electron mobility. , 2006, Journal of the American Chemical Society.

[407]  K. S. Nahm,et al.  Review on composite polymer electrolytes for lithium batteries , 2006 .

[408]  K. Zaghib,et al.  Electrochemical Features of Li-Ni-Mn-Co Oxides , 2006 .

[409]  Ying Wang,et al.  Nanostructured Vanadium Oxide Electrodes for Enhanced Lithium‐Ion Intercalation , 2006 .

[410]  Y. Chiang,et al.  Virus-Enabled Synthesis and Assembly of Nanowires for Lithium Ion Battery Electrodes , 2006, Science.

[411]  Venkataraman Thangadurai,et al.  Recent progress in solid oxide and lithium ion conducting electrolytes research , 2006 .

[412]  S. Pang,et al.  Environmentally friendly chemical route to vanadium oxide single-crystalline nanobelts as a cathode material for lithium-ion batteries. , 2006, The journal of physical chemistry. B.

[413]  T. Thongtem,et al.  Characterization of Li1−xNi1+xO2 prepared using succinic acid as a complexing agent , 2006 .

[414]  A. Mauger,et al.  Structural, Magnetic and Electrochemical Properties of the Spinel LiMn 2-y Co y O 4 Nanosized Powders , 2006 .

[415]  B. Khelifa,et al.  Ab initio investigation of the Jahn–Teller distortion effect on the stabilizing lithium intercalated compounds , 2005 .

[416]  Michael M. Thackeray,et al.  Spinel Electrodes for Lithium Batteries , 2004 .

[417]  M. Whittingham,et al.  Lithium batteries and cathode materials. , 2004, Chemical reviews.

[418]  C. Grey,et al.  NMR studies of cathode materials for lithium-ion rechargeable batteries. , 2004, Chemical reviews.

[419]  Ermete Antolini,et al.  LiCoO2: formation, structure, lithium and oxygen nonstoichiometry, electrochemical behaviour and transport properties , 2004 .

[420]  J. Shim,et al.  Electrochemical analysis for cycle performance and capacity fading of a lithium-ion battery cycled at elevated temperature , 2002 .

[421]  H. Sakaebe,et al.  Structure and Electrochemical Properties of LiFe x Mn2 − x O 4 ( 0 ⩽ x ⩽ 0.5 ) Spinel as 5 V Electrode Material for Lithium Batteries , 2001 .

[422]  Sai-Cheong Chung,et al.  Optimized LiFePO4 for Lithium Battery Cathodes , 2001 .

[423]  D. Hassell,et al.  Formation and Structural Properties of Layered LiMnO2 Cathode Materials , 2000 .

[424]  P. Bruce,et al.  Structural transformation on cycling layered Li(Mn1−yCoy)O2 cathode materials , 1999 .

[425]  Tsutomu Ohzuku,et al.  Solid-state redox potentials for Li[Me1/2Mn3/2]O4 (Me: 3d-transition metal) having spinel-framework structures: a series of 5 volt materials for advanced lithium-ion batteries , 1999 .

[426]  J. Akimoto,et al.  Synthesis and Structure Refinement of LiCoO2Single Crystals , 1998 .

[427]  Ralph E. White,et al.  Electrochemical Investigations of Cobalt-Doped LiMn 2 O 4 as Cathode Material for Lithium-Ion Batteries , 1998 .

[428]  R. Benedek,et al.  Lithium site preference and electronic structure of Li{sub 4}V{sub 3}O{sub 8} , 1997 .

[429]  John B. Goodenough,et al.  Effect of Structure on the Fe3 + / Fe2 + Redox Couple in Iron Phosphates , 1997 .

[430]  K. S. Nanjundaswamy,et al.  Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries , 1997 .

[431]  C. Delmas,et al.  Optimization of the Composition of the Li1 − z Ni1 + z O 2 Electrode Materials: Structural, Magnetic, and Electrochemical Studies , 1996 .

[432]  J. Tarascon,et al.  CoO2, the end member of the LixCoO2 solid solution , 1996 .

[433]  Lisa C. Klein,et al.  Cobalt dissolution in LiCoO2-based non-aqueous rechargeable batteries , 1996 .

[434]  Tsutomu Ohzuku,et al.  Solid‐State Redox Reactions of LiCoO2 (R3̅m) for 4 Volt Secondary Lithium Cells , 1994 .

[435]  R. Muller,et al.  Effect of Ion Implantation on the Corrosion Behavior of Lead and a Lead‐Antimony Alloy , 1994 .

[436]  W. David,et al.  Synthesis and structural characterization of defect spinels in the lithium-manganese-oxide system , 1993 .

[437]  Brian E. Conway,et al.  Modern Aspects of Electrochemistry , 1974 .