A Compact, Lightweight Robotic Ankle-Foot Prosthesis: Featuring a Powered Polycentric Design

Robotic ankle-foot prostheses aim to improve the mobility of individuals with belowknee amputations by closely imitating the biomechanical function of the missing biological limb. To accomplish this goal, they must provide biomechanically accurate torque during ambulation. In addition, they must satisfy further requirements such as build height, range of motion (ROM), and weight. These requirements are critical for determining the potential number of users, range of activities that can be performed, and clinical outcomes. Previous studies have proposed addressing this challenge through the use of advanced actuation systems with series and parallel elastic actuators, clutchable leverages, and pneumatic artificial muscles. These ad vanced actuation systems have shown improved mechanical and electrical efficiency compared to conventional servo motors, making powered ankle prostheses possible. However, the improved efficiency comes at the expense of a tall build height, reduced ROM, and significant increase in weight, thus limiting the clinical viability of currently available powered prostheses.

[1]  Marco Cempini,et al.  A lightweight robotic ankle prosthesis with non-backdrivable cam-based transmission , 2017, 2017 International Conference on Rehabilitation Robotics (ICORR).

[2]  S. Collins,et al.  Recycling Energy to Restore Impaired Ankle Function during Human Walking , 2010, PloS one.

[3]  Qingguo Li,et al.  Concurrent validation of Xsens MVN measurement of lower limb joint angular kinematics , 2013, Physiological measurement.

[4]  Kimberly A. Ingraham,et al.  Intuitive control of a powered prosthetic leg during ambulation: a randomized clinical trial. , 2015, JAMA.

[5]  Yashraj S. Narang,et al.  The Effects of Prosthesis Inertial Properties on Prosthetic Knee Moment and Hip Energetics Required to Achieve Able-Bodied Kinematics , 2016, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[6]  J. Edward Colgate,et al.  Design of an active one-degree-of-freedom lower-limb exoskeleton with inertia compensation , 2011, Int. J. Robotics Res..

[7]  Levi J. Hargrove,et al.  Minimum jerk swing control allows variable cadence in powered transfemoral prostheses , 2014, 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[8]  Alena M. Grabowski,et al.  The Functional Roles of Muscles, Passive Prostheses, and Powered Prostheses During Sloped Walking in People With a Transtibial Amputation. , 2017, Journal of biomechanical engineering.

[9]  A. Dollar,et al.  Estimation of Quasi-Stiffness and Propulsive Work of the Human Ankle in the Stance Phase of Walking , 2013, PloS one.

[10]  Marco Cempini,et al.  Design, Development, and Validation of a Lightweight Nonbackdrivable Robotic Ankle Prosthesis , 2019, IEEE/ASME Transactions on Mechatronics.

[11]  S. Wolf,et al.  Kinematics and kinetics with an adaptive ankle foot system during stair ambulation of transtibial amputees. , 2009, Gait & posture.

[12]  Marco Cempini,et al.  Design, development, and bench-top testing of a powered polycentric ankle prosthesis , 2017, 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[13]  Bram Vanderborght,et al.  Modeling, Design and Test-Bench Validation of a Semi-Active Propulsive Ankle Prosthesis With a Clutched Series Elastic Actuator , 2019, IEEE Robotics and Automation Letters.

[14]  Philip E. Martin,et al.  Short and Longer Term Changes in Amputee Walking Patterns Due to Increased Prosthesis Inertia , 2011 .

[15]  Jonathon W. Sensinger,et al.  Preliminary evaluation of a new control approach to achieve speed adaptation in robotic transfemoral prostheses , 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[16]  Hugh M. Herr,et al.  Powered ankle-foot prosthesis , 2008, IEEE Robotics & Automation Magazine.

[17]  Dirk Lefeber,et al.  Prosthetic feet: State-of-the-art review and the importance of mimicking human ankle–foot biomechanics , 2009, Disability and rehabilitation. Assistive technology.

[18]  R. Kram,et al.  The effects of adding mass to the legs on the energetics and biomechanics of walking. , 2007, Medicine and science in sports and exercise.

[19]  S. Jack,et al.  Current estimates from the National Health Interview Survey. , 1981, Vital and health statistics. Series 10, Data from the National Health Survey.

[20]  B. R. Umberger,et al.  A Robotic Ankle–Foot Prosthesis With Active Alignment , 2016 .

[21]  P. F. Adams,et al.  Current estimates from the National Health Interview Survey, 1994. , 1995, Vital and health statistics. Series 10, Data from the National Health Survey.

[22]  D. Sudakin,et al.  Appendix A , 2007, Journal of agromedicine.

[23]  R. Riener,et al.  Stair ascent and descent at different inclinations. , 2002, Gait & posture.

[24]  Philip E. Martin,et al.  Effects of prosthetic mass distribution on metabolic costs and walking symmetry. , 2013, Journal of applied biomechanics.

[25]  Michael Goldfarb,et al.  Design and Preliminary Assessment of Lightweight Swing-Assist Knee Prosthesis , 2018, 2018 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

[26]  Andrew K. LaPre,et al.  A Control Strategy for an Active Alignment Transtibial Prosthesis , 2015 .

[27]  Jason M Wilken,et al.  Energetic consequences of using a prosthesis with adaptive ankle motion during slope walking in persons with a transtibial amputation , 2014, Prosthetics and orthotics international.

[28]  David A. Winter,et al.  Biomechanics and Motor Control of Human Movement , 1990 .

[29]  Michael Goldfarb,et al.  Variable Cadence Walking and Ground Adaptive Standing With a Powered Ankle Prosthesis , 2016, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[30]  Lukas Gabert,et al.  Instrumented Pyramid Adapter for Amputee Gait Analysis and Powered Prosthesis Control , 2019, IEEE Sensors Journal.

[31]  M. Pina Aragón,et al.  Bionic hip prosthesis based on polycentric mechanisms , 2013, 2013 Pan American Health Care Exchanges (PAHCE).

[32]  Michael Goldfarb,et al.  Realizing the Promise of Robotic Leg Prostheses , 2013, Science Translational Medicine.

[33]  Michael Goldfarb,et al.  A Robotic Leg Prosthesis: Design, Control, and Implementation , 2014, IEEE Robotics & Automation Magazine.

[34]  T. Schmalz,et al.  Energy expenditure and biomechanical characteristics of lower limb amputee gait: the influence of prosthetic alignment and different prosthetic components. , 2002, Gait & posture.

[35]  Andrew Hansen,et al.  Passive prosthetic ankle-foot mechanism for automatic adaptation to sloped surfaces. , 2014, Journal of rehabilitation research and development.

[36]  T.G. Sugar,et al.  SPARKy 3: Design of an active robotic ankle prosthesis with two actuated degrees of freedom using regenerative kinetics , 2008, 2008 2nd IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics.

[37]  Ann M. Simon,et al.  A Training Method for Locomotion Mode Prediction Using Powered Lower Limb Prostheses , 2014, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[38]  Jonathon W. Sensinger,et al.  Speed-Adaptation Mechanism: Robotic Prostheses Can Actively Regulate Joint Torque , 2014, IEEE Robotics & Automation Magazine.

[39]  Fan Zhang,et al.  Continuous Locomotion-Mode Identification for Prosthetic Legs Based on Neuromuscular–Mechanical Fusion , 2011, IEEE Transactions on Biomedical Engineering.

[40]  P. F. Adams,et al.  Current estimates from the National Health Interview Survey, 1996. , 1999, Vital and health statistics. Series 10, Data from the National Health Survey.

[41]  Bram Vanderborght,et al.  Design and Validation of the Ankle Mimicking Prosthetic (AMP-) Foot 2.0 , 2014, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[42]  R DRILLIS,et al.  BODY SEGMENT PARAMETERS; A SURVEY OF MEASUREMENT TECHNIQUES. , 1964, Artificial limbs.

[43]  M. Ferrarin,et al.  A multiple-task gait analysis approach: kinematic, kinetic and EMG reference data for healthy young and adult subjects. , 2011, Gait & posture.

[44]  André Seyfarth,et al.  A powered prosthetic ankle joint for walking and running , 2016, Biomedical engineering online.

[45]  Elliott J. Rouse,et al.  The VSPA Foot: A Quasi-Passive Ankle-Foot Prosthesis With Continuously Variable Stiffness , 2017, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[46]  M. Mileusnic,et al.  First results concerning the safety, walking, and satisfaction with an innovative, microprocessor-controlled four-axes prosthetic foot , 2018, Prosthetics and orthotics international.

[47]  James O. Hill,et al.  Pedometer-measured physical activity and health behaviors in U.S. adults. , 2010, Medicine and science in sports and exercise.

[48]  S. A. Gard,et al.  Contribution of Prosthetic Knee and Ankle Mechanisms to Swing-Phase Foot Clearance , 2013, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[49]  Jonathon W. Sensinger,et al.  Design and preliminary testing of the RIC hybrid knee prosthesis , 2015, 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

[50]  Levi J. Hargrove,et al.  Depth Sensing for Improved Control of Lower Limb Prostheses , 2015, IEEE Transactions on Biomedical Engineering.

[51]  Andrew H Hansen,et al.  Biomechanics of the ankle-foot system during stair ambulation: implications for design of advanced ankle-foot prostheses. , 2012, Journal of biomechanics.

[52]  Marco Cempini,et al.  A Lightweight, Efficient Fully Powered Knee Prosthesis With Actively Variable Transmission , 2019, IEEE Robotics and Automation Letters.

[53]  Gang Yuan,et al.  A novel four-bar linkage prosthetic knee based on magnetorheological effect: principle, structure, simulation and control , 2016 .

[54]  Hugh M. Herr,et al.  Powered Ankle--Foot Prosthesis Improves Walking Metabolic Economy , 2009, IEEE Transactions on Robotics.

[55]  Long Wang,et al.  Walk the Walk: A Lightweight Active Transtibial Prosthesis , 2015, IEEE Robotics & Automation Magazine.

[56]  Alena M. Grabowski,et al.  Bionic ankle–foot prosthesis normalizes walking gait for persons with leg amputation , 2012, Proceedings of the Royal Society B: Biological Sciences.

[57]  Marco Cempini,et al.  Design, development, and testing of a lightweight hybrid robotic knee prosthesis , 2018, Int. J. Robotics Res..