Significant Potential and materials used in Additive Manufacturing technologies towards Sustainability

[1]  Prashant Singh,et al.  State-of-the-art in heat exchanger additive manufacturing , 2021 .

[2]  Bowen Xiao,et al.  A market assessment of additive manufacturing potential for the aerospace industry , 2021, Journal of Manufacturing Processes.

[3]  Hualin Fan,et al.  Design and additive manufacturing of a modified face-centered cubic lattice with enhanced energy absorption capability , 2021 .

[4]  Timothy W. Simpson,et al.  Maximizing design potential: investigating the effects of utilizing opportunistic and restrictive design for additive manufacturing in rapid response solutions , 2021 .

[5]  R. Setchi,et al.  Material-structure-performance integrated laser-metal additive manufacturing , 2021, Science.

[6]  A. Bernard,et al.  A constructive solid geometry-based generative design method for additive manufacturing , 2021 .

[7]  João P. M. Pragana,et al.  Hybrid metal additive manufacturing: A state–of–the-art review , 2021 .

[8]  S. Donahue,et al.  Bioinspired energy absorbing material designs using additive manufacturing. , 2021, Journal of the mechanical behavior of biomedical materials.

[9]  Kristina Shea,et al.  Enhancing Creative Redesign Through Multimodal Design Heuristics for Additive Manufacturing , 2021 .

[10]  Keun Park,et al.  Design and additive manufacturing of thermal metamaterial with high thermal resistance and cooling capability , 2021 .

[11]  Ying Yu,et al.  Design for additive manufacturing from a force-flow perspective , 2021, Materials & Design.

[12]  S. John,et al.  Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges , 2021, Polymers.

[13]  Mohd Javaid,et al.  Automation and manufacturing of smart materials in additive manufacturing technologies using Internet of Things towards the adoption of industry 4.0 , 2021 .

[14]  Daniel R. Eyers,et al.  The impact of Additive Manufacturing on the product-process matrix , 2021, Production Planning & Control.

[15]  D. Roberson,et al.  Novel polymer materials systems to expand the capabilities of FDM™-type additive manufacturing , 2021, MRS Communications.

[16]  C. Tuck,et al.  Additive manufacturing of advanced ceramic materials , 2021, Progress in Materials Science.

[17]  Alexander Rassau,et al.  Advances in Metal Additive Manufacturing: A Review of Common Processes, Industrial Applications, and Current Challenges , 2021, Applied Sciences.

[18]  Melik Dolen,et al.  Current trends and research opportunities in hybrid additive manufacturing , 2021, The International Journal of Advanced Manufacturing Technology.

[19]  Liam G. Connolly,et al.  Current challenges and potential directions towards precision microscale additive manufacturing – Part IV: Future perspectives , 2020, Precision Engineering.

[20]  Marcin Ziółkowski,et al.  Possible Applications of Additive Manufacturing Technologies in Shipbuilding: A Review , 2020, Machines.

[21]  Richard L. Watson,et al.  Additive manufacturing of metamaterials: A review , 2020, Additive Manufacturing.

[22]  D. Storti,et al.  The role of polymer mechanochemistry in responsive materials and additive manufacturing , 2020, Nature Reviews Materials.

[23]  Sanjay Yadav,et al.  Evolution of Measurement System and SI Units in India , 2020, MAPAN.

[24]  Mohd Javaid,et al.  Retrospective investigation of flexibility and their factors in additive manufacturing systems , 2020 .

[25]  Harish Kumar,et al.  A Review on Additive Manufactured Sensors , 2020 .

[26]  H. Qi,et al.  Recent advances in additive manufacturing of active mechanical metamaterials , 2020, Current Opinion in Solid State and Materials Science.

[27]  Timothy W. Simpson,et al.  Additive creativity: investigating the use of design for additive manufacturing to encourage creativity in the engineering design industry , 2020, International Journal of Design Creativity and Innovation.

[28]  Kyle Williams,et al.  Welding and Additive Manufacturing with Nanoparticle-Enhanced Aluminum 7075 Wire. , 2020, Journal of alloys and compounds.

[29]  Timothy W. Simpson,et al.  Fresh in My Mind! Investigating the effects of the order of presenting opportunistic and restrictive design for additive manufacturing content on students’ creativity , 2020, Journal of Engineering Design.

[30]  Li Yang,et al.  Introduction to Additive Manufacturing , 2020, Additive Manufacturing.

[31]  A Varvani-Farahani,et al.  A review of ultrasonic testing applications in additive manufacturing: Defect evaluation, material characterization, and process control. , 2020, Ultrasonics.

[32]  Mohd Javaid,et al.  3D printed tissue and organ using additive manufacturing: An overview , 2020 .

[33]  F. Liou,et al.  Additive manufacturing for energy: A review , 2020, Applied Energy.

[34]  Mohd Javaid,et al.  3D printed medical parts with different materials using additive manufacturing , 2020 .

[35]  S. Yadav,et al.  Redefined SI Units and Their Implications , 2020 .

[36]  M. Collan,et al.  How Additive Manufacturing Technology Changes Business Models? – Review of Literature , 2020 .

[37]  Danny Sims-Waterhouse,et al.  Design and characterisation of an additive manufacturing benchmarking artefact following a design-for-metrology approach , 2020, Additive Manufacturing.

[38]  Kijung Park,et al.  A Design Framework for Additive Manufacturing: Integration of Additive Manufacturing Capabilities in the Early Design Process , 2020, International Journal of Precision Engineering and Manufacturing.

[39]  F. Calignano,et al.  Comparing geometric tolerance capabilities of additive manufacturing systems for polymers , 2020 .

[40]  A. Tamayol,et al.  Additive manufacturing of magnesium alloys , 2020, Bioactive materials.

[41]  Andrew A. Shapiro,et al.  Advances in additive manufacturing of metal-based functionally graded materials , 2020, International Materials Reviews.

[42]  F. Martina,et al.  Design for Additive Manufacturing , 2019 .

[43]  Mohd Javaid,et al.  Polyether ether ketone (PEEK) and its manufacturing of customised 3D printed dentistry parts using additive manufacturing , 2019, Clinical Epidemiology and Global Health.

[44]  Afaqul Zafer,et al.  Economic Impact Studies of Pressure and Vacuum Metrology at CSIR-NPL, India , 2019, MAPAN.

[45]  Claude Gazo,et al.  A Proposal for a Methodology of Technical Creativity Mixing TRIZ and Additive Manufacturing , 2019, TFC.

[46]  Mohd Javaid,et al.  Additive Manufacturing Applications in Industry 4.0: A Review , 2019, Journal of Industrial Integration and Management.

[47]  H. I. Medellín-Castillo,et al.  Design and Manufacturing Strategies for Fused Deposition Modelling in Additive Manufacturing: A Review , 2019, Chinese Journal of Mechanical Engineering.

[48]  Mohd Javaid,et al.  Current status and applications of additive manufacturing in dentistry: A literature-based review. , 2019, Journal of oral biology and craniofacial research.

[49]  Christo Dordlofva,et al.  Drivers and Guidelines in Design for Qualification Using Additive Manufacturing in Space Applications , 2019, Proceedings of the Design Society: International Conference on Engineering Design.

[50]  Annie Ross,et al.  Acoustic properties of periodic micro-structures obtained by additive manufacturing , 2019, Applied Acoustics.

[51]  Constantia Anastasiadou,et al.  “From souvenirs to 3D printed souvenirs”. Exploring the capabilities of additive manufacturing technologies in (re)-framing tourist souvenirs , 2019, Tourism Management.

[52]  Kristina Shea,et al.  Design Heuristics for Additive Manufacturing Validated Through a User Study1 , 2019, Journal of Mechanical Design.

[53]  J. A. Sethian,et al.  Instrumentation for In situ/Operando X-ray Scattering Studies of Polymer Additive Manufacturing Processes , 2019, Synchrotron Radiation News.

[54]  Mohd Javaid,et al.  Current status and challenges of Additive manufacturing in orthopaedics: An overview. , 2019, Journal of clinical orthopaedics and trauma.

[55]  Mohd Javaid,et al.  Using additive manufacturing applications for design and development of food and agricultural equipments , 2019, International Journal of Materials and Product Technology.

[56]  Maxim Shusteff,et al.  Volumetric additive manufacturing via tomographic reconstruction , 2019, Science.

[57]  Benjamin Durakovic,et al.  Design for additive manufacturing: Benefits, trends and challenges , 2018, Periodicals of Engineering and Natural Sciences (PEN).

[58]  M. Javaid,et al.  Additive manufacturing applications in medical cases: A literature based review , 2018, Alexandria Journal of Medicine.

[59]  E. Oneida,et al.  Nondestructive evaluation method for standardization of fused filament fabrication based additive manufacturing , 2018, Additive Manufacturing.

[60]  Rajesh Kumar,et al.  FEA-Based Design Studies for Development of Diaphragm Force Transducers , 2018, MAPAN.

[61]  Ahmed Jawad Qureshi,et al.  Plasma transferred arc additive manufacturing of Nickel metal matrix composites , 2018, Manufacturing Letters.

[62]  Xun Xu,et al.  IoT-enabled cloud-based additive manufacturing platform to support rapid product development , 2018, Int. J. Prod. Res..

[63]  E. Reynaud,et al.  Assessing the Capabilities of Additive Manufacturing Technologies for Coral Studies, Education, and Monitoring , 2018, Front. Mar. Sci..

[64]  Daniel Roy Eyers,et al.  The flexibility of industrial additive manufacturing systems , 2018, International Journal of Operations & Production Management.

[65]  Hu Fuwen,et al.  Interactive design for additive manufacturing: a creative case of synchronous belt drive , 2018 .

[66]  A. Bandyopadhyay,et al.  Additive manufacturing of multi-material structures , 2018, Materials Science and Engineering: R: Reports.

[67]  Xun Xu,et al.  A Knowledge Management System to Support Design for Additive Manufacturing Using Bayesian Networks , 2018 .

[68]  M. G. Kay,et al.  Hybrid manufacturing – integrating traditional manufacturers with additive manufacturing (AM) supply chain , 2018 .

[69]  Seung Ki Moon,et al.  A multi-material part design framework in additive manufacturing , 2018 .

[70]  Mohd Javaid,et al.  Additive manufacturing applications in orthopaedics: A review. , 2018, Journal of clinical orthopaedics and trauma.

[71]  Alkaios Bournias-Varotsis,et al.  Ultrasonic additive manufacturing as a form-then-bond process for embedding electronic circuitry into a metal matrix , 2018 .

[72]  Patrick Pradel,et al.  Investigation of design for additive manufacturing in professional design practice , 2018 .

[73]  Nikhil Gupta,et al.  Additive Manufacturing of Composites and Complex Materials , 2018 .

[74]  Sundar Krishnamurty,et al.  A Knowledge-Based Method for Innovative Design for Additive Manufacturing Supported by Modular Ontologies , 2018, J. Comput. Inf. Sci. Eng..

[75]  W. Stautner,et al.  The scope of additive manufacturing in cryogenics, component design, and applications , 2017, IOP Conference Series: Materials Science and Engineering.

[76]  Daniel R. Eyers,et al.  Industrial Additive Manufacturing: A manufacturing systems perspective , 2017, Comput. Ind..

[77]  Martin Richardson,et al.  Characterization of Laser Additive Manufacturing-Fabricated Porous Superalloys for Turbine Components , 2017 .

[78]  David Espalin,et al.  Material handling and registration for an additive manufacturing-based hybrid system , 2017 .

[79]  Caterina Rizzi,et al.  Additive Manufacturing to Advance Functional Design: An Application in the Medical Field , 2017, J. Comput. Inf. Sci. Eng..

[80]  Lauren L. Beghini,et al.  Additive manufacturing: Toward holistic design , 2017 .

[81]  Rui Hu,et al.  Design Optimization Method for Additive Manufacturing of the Primary Mirror of a Large-Aperture Space Telescope , 2017 .

[82]  Gianluca D’Antonio,et al.  Enriching design with X through tailored additive manufacturing knowledge : a methodological proposal , 2017 .

[83]  David W. Rosen,et al.  A review of synthesis methods for additive manufacturing , 2016 .

[84]  Alaa Elwany,et al.  Prediction of porosity in metal-based additive manufacturing using spatial Gaussian process models , 2016 .

[85]  Derek W. Schmidt,et al.  Additive Manufacturing Capabilities Applied to Inertial Confinement Fusion at Los Alamos National Laboratory , 2016 .

[86]  Markus Dickerhof,et al.  A modular flexible scalable and reconfigurable system for manufacturing of Microsystems based on additive manufacturing and e-printing , 2016 .

[87]  Yaoyao Fiona Zhao,et al.  A survey of the design methods for additive manufacturing to improve functional performance , 2016 .

[88]  Stephen Warde,et al.  Overview of Additive Manufacturing Informatics: “A Digital Thread” , 2016, Integrating Materials and Manufacturing Innovation.

[89]  Konstantinos Salonitis,et al.  Design for additive manufacturing based on the axiomatic design method , 2016, The International Journal of Advanced Manufacturing Technology.

[90]  André R Studart,et al.  Additive manufacturing of biologically-inspired materials. , 2016, Chemical Society reviews.

[91]  Thomas Vietor,et al.  A new methodological framework for design for additive manufacturing , 2016 .

[92]  Mahmoud Houshmand,et al.  Depicting additive manufacturing from a global perspective; using Cloud manufacturing paradigm for integration and collaboration , 2015 .

[93]  Paul Witherell,et al.  Investigating the Role of Geometric Dimensioning and Tolerancing in Additive Manufacturing , 2015 .

[94]  Kevin Otto,et al.  Design knowledge representation to support personalised additive manufacturing , 2015 .

[95]  Murali M. Sundaram,et al.  A novel system for cloud-based micro additive manufacturing of metal structures , 2015 .

[96]  Seung Ki Moon,et al.  Design for additive manufacturing in customized products , 2015 .

[97]  G. Cheng,et al.  An identification method for enclosed voids restriction in manufacturability design for additive manufacturing structures , 2015 .

[98]  Yaoyao Fiona Zhao,et al.  Additive manufacturing-enabled design theory and methodology: a critical review , 2015 .

[99]  Christiane Beyer,et al.  Strategic Implications of Current Trends in Additive Manufacturing , 2014 .

[100]  D. J. de Beer,et al.  IMPLEMENTING THE SOUTH AFRICAN ADDITIVE MANUFACTURING TECHNOLOGY ROADMAP – THE ROLE OF AN ADDITIVE MANUFACTURING CENTRE OF COMPETENCE , 2014 .

[101]  Thomas R. Kurfess,et al.  Rethinking Additive Manufacturing and Intellectual Property Protection , 2014 .

[102]  David W. Rosen,et al.  Design for Additive Manufacturing: Past, Present, and Future Directions , 2014 .

[103]  Saigopal Nelaturi,et al.  Manufacturability Feedback and Model Correction for Additive Manufacturing , 2014 .

[104]  Gero G. Kempf,et al.  Capabilities of additive manufacturing technologies (AMT) in the validation of the automotive cockpit , 2014 .

[105]  David Z. Zhang,et al.  Additive manufacturing: A framework for implementation , 2014 .

[106]  A. Davoudinejad.  Vat photopolymerization methods in additive manufacturing , 2021 .

[107]  M. Manjaiah,et al.  Developments in additive manufacturing , 2021, Additive Manufacturing.

[108]  J. Yanagimoto,et al.  Topology optimization of microlattice dome with enhanced stiffness and energy absorption for additive manufacturing , 2021 .

[109]  Craig E. Banks,et al.  Future of additive manufacturing: Overview of 4D and 3D printed smart and advanced materials and their applications , 2021 .

[110]  Roberto Teti,et al.  Current advances in additive manufacturing , 2020 .

[111]  Prahar M. Bhatt,et al.  Expanding capabilities of additive manufacturing through use of robotics technologies: A survey , 2020 .

[112]  Andres Tovar,et al.  Review of additive manufacturing technologies and applications in the aerospace industry , 2019, Additive Manufacturing for the Aerospace Industry.

[113]  Lonnie J. Love,et al.  Designing for Big Area Additive Manufacturing , 2019, Additive Manufacturing.

[114]  Simone Zanoni,et al.  Impact of Merging Components by Additive Manufacturing in Spare Parts Management , 2017 .

[115]  Christopher B. Williams,et al.  Preparing industry for additive manufacturing and its applications: Summary & recommendations from a National Science Foundation workshop , 2017 .

[116]  Mika Salmi,et al.  Additive Manufacturing in Finland: Recommendations for a Renewed Innovation Policy , 2017 .

[117]  Hirpa G. Lemu,et al.  Design for manufacturing to design for Additive Manufacturing: Analysis of implications for design optimality and product sustainability , 2017 .

[118]  George Chryssolouris,et al.  A Design Framework to Replace Conventional Manufacturing Processes with Additive Manufacturing for Structural Components: A Formula Student Case Study , 2016 .

[119]  Saeed Al Zarban,et al.  Redesign optimization for manufacturing using additive layer techniques , 2015 .

[120]  K. Wood,et al.  International conference on engineering design, iced15 27-30 July 2015, politecnico di Milano, Italy crowdsourced design principles for leveraging the capabilities of additive manufacturing , 2015 .

[121]  Eric Coatanéa,et al.  Additive Manufacturing in Production: A Study Case Applying Technical Requirements , 2015 .

[122]  David W. Rosen,et al.  What are Principles for Design for Additive Manufacturing , 2014 .

[123]  Thomas A. Campbell,et al.  ADDITIVE MANUFACTURING AS A DISRUPTIVE TECHNOLOGY: IMPLICATIONS OF THREE-DIMENSIONAL PRINTING , 2013 .

[124]  Frédéric Vignat,et al.  Identification on Some Design Key Parameters for Additive Manufacturing: Application on Electron Beam Melting , 2013 .

[125]  Frédéric Vignat,et al.  Designing for Additive Manufacturing , 2012 .

[126]  David W. Rosen,et al.  Design for Additive Manufacturing of Cellular Structures , 2008 .