An all SiC MOSFET high performance PV converter cell

Recent studies have pointed out the benefits of using Silicon Carbide (SiC) devices in photo-voltaic power conversion. In Particular, SiC Power MOSFET technology has greatly advanced over the last years and has presently reached sufficient maturity to stimulate a concrete interest in the development of power conversion circuits based entirely on this technology, in view of the clear potential advantages it offers over alternative SiC device technologies (e.g., JFET, BJT). This paper presents a thorough characterization of an all SiC MOSFET based single-phase bi-directional switched neutral-point-clamped (BSNPC) three level inverter, in which, for the first time, SiC Power MOSFETs of different voltage ratings (1200 and 600V) are used. A parametric experimental characterization of the power cell performance is carried out, separating the effects of output power, heat-sink temperature and switching frequency and load variations by means of bespoke heat-sink design. The effect of relying exclusively on the MOSFET body-diode for inductive load current freewheeling is critically assessed against usage of an external SiC Schottky diode. The experimental results are compared with a mixed approach design, where Silicon (Si) devices are used for the lower voltage switches and SiC MOSFETs are kept for the higher voltage ones, deriving a clear indication of the superior possibilities offered by SiC Power MOSFETs for improved efficiency, power density and reliability, key aspects of power electronics technology evolution.

[1]  R. McMahon,et al.  Boost Converter With SiC JFETs: Comparison With CoolMOS and Tests at Elevated Case Temperature , 2013, IEEE Transactions on Power Electronics.

[2]  G. Majumdar.  Recent technologies and trends of power devices , 2007, 2007 International Workshop on Physics of Semiconductor Devices.

[3]  Sei-Hyung Ryu,et al.  A New Degradation Mechanism in High-Voltage SiC Power MOSFETs , 2007, IEEE Electron Device Letters.

[4]  H. Mantooth,et al.  Power Conversion With SiC Devices at Extremely High Ambient Temperatures , 2007, IEEE Transactions on Power Electronics.

[5]  E. Santi,et al.  An assessment of wide bandgap semiconductors for power devices , 2003 .

[6]  R. A. Wood,et al.  Evaluation of a 1200-V, 800-A All-SiC Dual Module , 2011, IEEE Transactions on Power Electronics.

[7]  Remus Teodorescu,et al.  A New High-Efficiency Single-Phase Transformerless PV Inverter Topology , 2011, IEEE Transactions on Industrial Electronics.

[8]  Peter Zacharias,et al.  Analysis on the potential of Silicon Carbide MOSFETs and other innovative semiconductor technologies in the photovoltaic branch , 2009, 2009 13th European Conference on Power Electronics and Applications.

[9]  F. Canales,et al.  A Comparative Performance Study of an Interleaved Boost Converter Using Commercial Si and SiC Diodes for PV Applications , 2013, IEEE Transactions on Power Electronics.

[10]  Peter Zacharias,et al.  Perspectives of high-voltage SiC-semiconductors in high power conversion systems for wind and photovoltaic sources , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[11]  W. Koczara,et al.  A three level inverter concept for low voltage applications , 2007, 2007 European Conference on Power Electronics and Applications.