Thermoresponsive hydrogels in biomedical applications.

Environmentally responsive hydrogels have the ability to turn from solution to gel when a specific stimulus is applied. Thermoresponsive hydrogels utilize temperature change as the trigger that determines their gelling behavior without any additional external factor. These hydrogels have been interesting for biomedical uses as they can swell in situ under physiological conditions and provide the advantage of convenient administration. The scope of this paper is to review the aqueous polymer solutions that exhibit transition to gel upon temperature change. Typically, aqueous solutions of hydrogels used in biomedical applications are liquid at ambient temperature and gel at physiological temperature. The review focuses mainly on hydrogels based on natural polymers, N-isopropylacrylamide polymers, poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) polymers as well as poly(ethylene glycol)-biodegradable polyester copolymers.

[1]  K. Nishinari,et al.  Tailoring of xyloglucan properties using an enzyme , 1998 .

[2]  K. Matyjaszewski,et al.  Synthesis, characterization, and in vitro cell culture viability of degradable poly(N-isopropylacrylamide-co-5,6-benzo-2-methylene-1,3-dioxepane)-based polymers and crosslinked gels. , 2008, Journal of biomedical materials research. Part A.

[3]  G. Ryu,et al.  Synthesis and characterization of thermosensitive chitosan copolymer as a novel biomaterial , 2004, Journal of biomaterials science. Polymer edition.

[4]  M. Heskins,et al.  Solution Properties of Poly(N-isopropylacrylamide) , 1968 .

[5]  Takehisa Matsuda,et al.  Poly (N-isopropylacrylamide) (PNIPAM)-grafted gelatin as thermoresponsive three-dimensional artificial extracellular matrix: molecular and formulation parameters vs. cell proliferation potential , 2005, Journal of biomaterials science. Polymer edition.

[6]  Giyoong Tae,et al.  Formulation and in vitro characterization of an in situ gelable, photo-polymerizable Pluronic hydrogel suitable for injection. , 2007, Journal of controlled release : official journal of the Controlled Release Society.

[7]  Sung Wan Kim,et al.  Biodegradable block copolymers as injectable drug-delivery systems , 1997, Nature.

[8]  D G Stein,et al.  Biocompatibility of methylcellulose-based constructs designed for intracerebral gelation following experimental traumatic brain injury. , 2001, Biomaterials.

[9]  Jason A Burdick,et al.  An initial investigation of photocurable three-dimensional lactic acid based scaffolds in a critical-sized cranial defect. , 2003, Biomaterials.

[10]  G. Horvai,et al.  Formulation of thermoresponsive and bioadhesive gel for treatment of oesophageal pain and inflammation. , 2009, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[11]  Ait-Kadi,et al.  Study of the Gelation Process of Polyethylene Oxidea -Polypropylene Oxideb -Polyethylene Oxidea Copolymer (Poloxamer 407) Aqueous Solutions , 1997, Journal of Colloid and Interface Science.

[12]  B. Lee,et al.  Simultaneously physically and chemically gelling polymer system utilizing a poly(NIPAAm-co-cysteamine)-based copolymer. , 2007, Biomacromolecules.

[13]  C T Laurencin,et al.  Biodegradable polyphosphazenes for drug delivery applications. , 2003, Advanced drug delivery reviews.

[14]  Xian Jun Loh,et al.  New biodegradable thermogelling copolymers having very low gelation concentrations. , 2007, Biomacromolecules.

[15]  Xiaodong Fan,et al.  pH-responsive amphiphilic hydrogel networks with IPN structure: a strategy for controlled drug release. , 2006, International journal of pharmaceutics.

[16]  Miqin Zhang,et al.  PEG-grafted chitosan as an injectable thermosensitive hydrogel for sustained protein release. , 2005, Journal of controlled release : official journal of the Controlled Release Society.

[17]  Charles A Vacanti,et al.  Tissue-engineered lung: an in vivo and in vitro comparison of polyglycolic acid and pluronic F-127 hydrogel/somatic lung progenitor cell constructs to support tissue growth. , 2006, Tissue engineering.

[18]  P. Ma,et al.  Ionically crosslinked alginate hydrogels as scaffolds for tissue engineering: part 1. Structure, gelation rate and mechanical properties. , 2001, Biomaterials.

[19]  Antonios G Mikos,et al.  Biodegradable gelatin microparticles as delivery systems for the controlled release of bone morphogenetic protein-2. , 2008, Acta biomaterialia.

[20]  H. Yoo,et al.  In vivo and in vitro anti-cancer activity of thermo-sensitive and photo-crosslinkable doxorubicin hydrogels composed of chitosan-doxorubicin conjugates. , 2009, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[21]  Zu-wei Ma,et al.  Protein-reactive, thermoresponsive copolymers with high flexibility and biodegradability. , 2008, Biomacromolecules.

[22]  G. Kang,et al.  Controlled release of doxorubicin from thermosensitive poly(organophosphazene) hydrogels. , 2006, International journal of pharmaceutics.

[23]  En-Tang Kang,et al.  pH- and temperature-responsive hydrogels from crosslinked triblock copolymers prepared via consecutive atom transfer radical polymerizations. , 2006, Biomaterials.

[24]  J. Hubbell,et al.  Materials for Cell Encapsulation via a New Tandem Approach Combining Reverse Thermal Gelation and Covalent Crosslinking. , 2002 .

[25]  Chaoliang He,et al.  In situ gelling stimuli-sensitive block copolymer hydrogels for drug delivery. , 2008, Journal of controlled release : official journal of the Controlled Release Society.

[26]  C. Werner,et al.  Thermo-responsive poly(NiPAAm-co-DEGMA) substrates for gentle harvest of human corneal endothelial cell sheets. , 2007, Journal of biomedical materials research. Part A.

[27]  A. Mikos,et al.  Synthesis and characterization of injectable, thermally and chemically gelable, amphiphilic poly(N-isopropylacrylamide)-based macromers. , 2008, Biomacromolecules.

[28]  T. A. Hatton,et al.  Poly(ethylene oxide)-poly(propylene oxide )-poly (ethylene oxide) block copolymer surfactants in aqueous solutions and at interfaces: thermodynamics, structure, dynamics, and modeling , 1995 .

[29]  H. Yoo,et al.  DNA nanogels composed of chitosan and Pluronic with thermo-sensitive and photo-crosslinking properties. , 2009, International journal of pharmaceutics.

[30]  T. Okano,et al.  Preparation of thermoresponsive cationic copolymer brush surfaces and application of the surface to separation of biomolecules. , 2008, Biomacromolecules.

[31]  R V Bellamkonda,et al.  Polylysine-functionalised thermoresponsive chitosan hydrogel for neural tissue engineering. , 2007, Biomaterials.

[32]  Miqin Zhang,et al.  PEG-grafted chitosan as an injectable thermoreversible hydrogel. , 2005, Macromolecular bioscience.

[33]  A. Higuchi,et al.  Serum protein adsorption and platelet adhesion on pluronic-adsorbed polysulfone membranes. , 2003, Biomaterials.

[34]  Daniel Cohn,et al.  Reverse thermo-responsive poly(ethylene oxide) and poly(propylene oxide) multiblock copolymers. , 2005, Biomaterials.

[35]  I. R. Schmolka Artificial skin. I. Preparation and properties of pluronic F-127 gels for treatment of burns. , 1972, Journal of biomedical materials research.

[36]  Maria J. Troulis,et al.  Hydrogel-β-TCP scaffolds and stem cells for tissue engineering bone , 2006 .

[37]  T. Okano,et al.  A novel recovery system for cultured cells using plasma-treated polystyrene dishes grafted with poly(N-isopropylacrylamide). , 1993, Journal of biomedical materials research.

[38]  Jöns Hilborn,et al.  Poly(vinyl alcohol)-Based Hydrogels Formed by “Click Chemistry” , 2006 .

[39]  Avraham Levi,et al.  PEO-PPO-PEO-based poly(ether ester urethane)s as degradable reverse thermo-responsive multiblock copolymers. , 2006, Biomaterials.

[40]  Yuquan Wei,et al.  Biodegradable in situ gel-forming controlled drug delivery system based on thermosensitive PCL-PEG-PCL hydrogel. Part 2: sol-gel-sol transition and drug delivery behavior. , 2009, Acta biomaterialia.

[41]  Alexander V Kabanov,et al.  Pluronic block copolymers as novel polymer therapeutics for drug and gene delivery. , 2002, Journal of controlled release : official journal of the Controlled Release Society.

[42]  Renzo M. Paulus,et al.  Tunable pH- and Temperature-Sensitive Copolymer Libraries by Reversible Addition−Fragmentation Chain Transfer Copolymerizations of Methacrylates , 2007 .

[43]  Buddy D. Ratner,et al.  Biomaterials Science: An Introduction to Materials in Medicine , 1996 .

[44]  Sang Young Lee,et al.  Thermosensitive chitosan-Pluronic hydrogel as an injectable cell delivery carrier for cartilage regeneration. , 2009, Acta biomaterialia.

[45]  Masae Takahashi,et al.  Thermoreversible gelation and phase separation in aqueous methyl cellulose solutions , 2001 .

[46]  J. Leroux,et al.  In situ-forming hydrogels--review of temperature-sensitive systems. , 2004, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[47]  H. G. Schild Poly(N-isopropylacrylamide): experiment, theory and application , 1992 .

[48]  Howard G. Schild,et al.  Microcalorimetric detection of lower critical solution temperatures in aqueous polymer solutions , 1990 .

[49]  Gilson Khang,et al.  Thermosensitive poly(organophosphazene) hydrogels for a controlled drug delivery. , 2006, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[50]  You Han Bae,et al.  Thermogelling aqueous solutions of alternating multiblock copolymers of poly(L-lactic acid) and poly(ethylene glycol). , 2006, Biomacromolecules.

[51]  R. Spontak,et al.  Swelling behavior and morphological evolution of mixed gelatin/silk fibroin hydrogels. , 2005, Biomacromolecules.

[52]  B. Cantor,et al.  Poloxamer 407 as an Intraperitoneal Barrier Material for the Prevention of Postsurgical Adhesion Formation and Reformation in Rodent Models for Reproductive Surgery , 1991, Obstetrics and gynecology.

[53]  Sung Won Kim,et al.  Delivery of dexamethasone, ascorbate, and growth factor (TGF beta-3) in thermo-reversible hydrogel constructs embedded with rabbit chondrocytes. , 2006, Biomaterials.

[54]  T. Okano,et al.  Molecular design of biodegradable polymeric micelles for temperature-responsive drug release. , 2006, Journal of controlled release : official journal of the Controlled Release Society.

[55]  Yi Yan Yang,et al.  Preparation and characterization of fast response macroporous poly(N-isopropylacrylamide) hydrogels , 2001 .

[56]  K. De Yao,et al.  A rapid temperature-responsive sol-gel reversible poly(N-isopropylacrylamide)-g-methylcellulose copolymer hydrogel. , 2004, Biomaterials.

[57]  Jiyoung M Dang,et al.  Temperature-responsive hydroxybutyl chitosan for the culture of mesenchymal stem cells and intervertebral disk cells. , 2006, Biomaterials.

[58]  Sang Beom Lee,et al.  A New Class of Biodegradable Thermosensitive Polymers. I. Synthesis and Characterization of Poly(organophosphazenes) with Methoxy-Poly(ethylene glycol) and Amino Acid Esters as Side Groups , 1999 .

[59]  A. Kabanov,et al.  Pluronic Block Copolymers for Gene Delivery. , 2005, Advances in genetics.

[60]  T. Vermonden,et al.  Photopolymerized thermosensitive hydrogels: synthesis, degradation, and cytocompatibility. , 2008, Biomacromolecules.

[61]  Jan Feijen,et al.  Effect of comonomer hydrophilicity and ionization on the lower critical solution temperature of N-isopropylacrylamide copolymers , 1993 .

[62]  Masayuki Yamato,et al.  Bio-functionalized thermoresponsive interfaces facilitating cell adhesion and proliferation. , 2006, Biomaterials.

[63]  Hu Yang,et al.  Thermoresponsive Gelatin/Monomethoxy Poly(Ethylene Glycol)–Poly(d,l-lactide) Hydrogels: Formulation, Characterization, and Antibacterial Drug Delivery , 2006, Pharmaceutical Research.

[64]  H. Sung,et al.  Construction and characterization of fragmented mesenchymal-stem-cell sheets for intramuscular injection. , 2007, Biomaterials.

[65]  Bing Kan,et al.  Synthesis and characterization of PEG-PCL-PEG thermosensitive hydrogel. , 2009, International journal of pharmaceutics.

[66]  S Neelamegham,et al.  The Ability of Poloxamers to Inhibit Platelet Aggregation Depends on their Physicochemical Properties , 2001, Thrombosis and Haemostasis.

[67]  Jun Li,et al.  Hydrolytic degradation and protein release studies of thermogelling polyurethane copolymers consisting of poly[(R)-3-hydroxybutyrate], poly(ethylene glycol), and poly(propylene glycol). , 2007, Biomaterials.

[68]  Y. Bae,et al.  In situ gelation of PEG-PLGA-PEG triblock copolymer aqueous solutions and degradation thereof. , 2000, Journal of biomedical materials research.

[69]  H. Chung,et al.  Photo-crosslinkable and biodegradable Pluronic/heparin hydrogels for local and sustained delivery of angiogenic growth factor. , 2007, Journal of biomedical materials research. Part A.

[70]  N. Peppas Hydrogels in Medicine and Pharmacy , 1987 .

[71]  D. Cohn,et al.  Smart hydrogels for in situ generated implants. , 2005, Biomacromolecules.

[72]  G. Abraham,et al.  Crosslinkable PEO-PPO-PEO-based reverse thermo-responsive gels as potentially injectable materials , 2003, Journal of biomaterials science. Polymer edition.

[73]  Mark W. Tibbitt,et al.  Hydrogels as extracellular matrix mimics for 3D cell culture. , 2009, Biotechnology and bioengineering.

[74]  A. Mikos,et al.  Preparation Methods and Structure of Hydrogels , 1986, Hydrogels in Medicine and Pharmacy.

[75]  J. Mano,et al.  Development of bioactive and biodegradable chitosan-based injectable systems containing bioactive glass nanoparticles. , 2009, Acta biomaterialia.

[76]  Jie Zhang,et al.  Rapid pH/temperature-responsive cationic hydrogels with dual stimuli-sensitive grafted side chains , 2009 .

[77]  K. Anseth,et al.  A review of photocrosslinked polyanhydrides: in situ forming degradable networks. , 2000, Biomaterials.

[78]  A. Mikos,et al.  Synthesis and characterization of triblock copolymers of methoxy poly(ethylene glycol) and poly(propylene fumarate). , 2002, Biomacromolecules.

[79]  Bo Wang,et al.  Synthesis and properties of pH and temperature sensitive P(NIPAAm-co-DMAEMA) hydrogels. , 2008, Colloids and surfaces. B, Biointerfaces.

[80]  C. Chu,et al.  Synthesis and characterization of partially biodegradable, temperature and pH sensitive Dex-MA/PNIPAAm hydrogels. , 2004, Biomaterials.

[81]  K. Neoh,et al.  Pentablock copolymers of poly(ethylene glycol), poly((2-dimethyl amino)ethyl methacrylate) and poly(2-hydroxyethyl methacrylate) from consecutive atom transfer radical polymerizations for non-viral gene delivery. , 2008, Biomaterials.

[82]  Jean Claude Chaumeil,et al.  A Review of Poloxamer 407 Pharmaceutical and Pharmacological Characteristics , 2006, Pharmaceutical Research.

[83]  C. Sen,et al.  Injectable, highly flexible, and thermosensitive hydrogels capable of delivering superoxide dismutase. , 2009, Biomacromolecules.

[84]  N. Peppas,et al.  Hydrogels in Pharmaceutical Formulations , 1999 .

[85]  Jagdish Singh,et al.  Controlled delivery of testosterone from smart polymer solution based systems: in vitro evaluation. , 2005, International journal of pharmaceutics.

[86]  Soo-Chang Song,et al.  A thermosensitive poly(organophosphazene) hydrogel for injectable tissue-engineering applications , 2007, Journal of biomaterials science. Polymer edition.

[87]  H. Deschout,et al.  Photopolymerized thermosensitive hydrogels for tailorable diffusion-controlled protein delivery. , 2009, Journal of controlled release : official journal of the Controlled Release Society.

[88]  W. Hennink,et al.  2-(Dimethylamino)ethyl methacrylate based (co)polymers as gene transfer agents. , 1998, Journal of controlled release : official journal of the Controlled Release Society.

[89]  Glenn D Prestwich,et al.  Synthesis and evaluation of injectable, in situ crosslinkable synthetic extracellular matrices for tissue engineering. , 2006, Journal of biomedical materials research. Part A.

[90]  D. Attwood,et al.  In situ gelling xyloglucan/pectin formulations for oral sustained drug delivery. , 2008, International journal of pharmaceutics.

[91]  Y. Sohn,et al.  The relationship of thermosensitive properties with structure of organophosphazenes , 2004 .

[92]  Joe Tien,et al.  Fabrication of microfluidic hydrogels using molded gelatin as a sacrificial element. , 2007, Lab on a chip.

[93]  J. Hubbell,et al.  Towards a fully-synthetic substitute of alginate: development of a new process using thermal gelation and chemical cross-linking. , 2004, Biomaterials.

[94]  K. Dill,et al.  A View of the Hydrophobic Effect , 2002 .

[95]  Allan S Hoffman,et al.  Poly(N-isopropylacrylamide-co-propylacrylic acid) copolymers that respond sharply to temperature and pH. , 2006, Biomacromolecules.

[96]  P. Ascenzi,et al.  pH- and temperature-sensitive polymeric microspheres for drug delivery: the dissolution of copolymers modulates drug release , 2009, Journal of materials science. Materials in medicine.

[97]  Yong Pei,et al.  The effect of pH on the LCST of poly(N-isopropylacrylamide) and poly(N-isopropylacrylamide-co-acrylic acid) , 2004, Journal of biomaterials science. Polymer edition.

[98]  Yan Jin,et al.  Novel glycidyl methacrylated dextran (Dex-GMA)/gelatin hydrogel scaffolds containing microspheres loaded with bone morphogenetic proteins: formulation and characteristics. , 2007, Journal of controlled release : official journal of the Controlled Release Society.

[99]  Chaobin He,et al.  The effect of salt and pH on the phase-transition behaviors of temperature-sensitive copolymers based on N-isopropylacrylamide. , 2004, Biomaterials.

[100]  R. Nalbandian,et al.  Pluronic F-127 gel preparation as an artificial skin in the treatment of third-degree burns in pigs. , 1987, Journal of biomedical materials research.

[101]  J. Fisher,et al.  Thermoreversible hydrogel scaffolds for articular cartilage engineering. , 2004, Journal of biomedical materials research. Part A.

[102]  Y. Bae,et al.  Thermosensitive sol-gel reversible hydrogels. , 2002, Advanced drug delivery reviews.

[103]  Su-Hyang Kim,et al.  Chondrogenic differentiation of human mesenchymal stem cells using a thermosensitive poly(N-isopropylacrylamide) and water-soluble chitosan copolymer. , 2004, Biomaterials.

[104]  Keun-Hong Park,et al.  Morphology of spheroidal hepatocytes within injectable, biodegradable, and thermosensitive poly(organophosphazene) hydrogel as cell delivery vehicle. , 2006, Journal of bioscience and bioengineering.

[105]  Daniel Cohn,et al.  Ethoxysilane-capped PEO-PPO-PEO triblocks: a new family of reverse thermo-responsive polymers. , 2004, Biomaterials.

[106]  K. Tobita,et al.  Synthesis, characterization and therapeutic efficacy of a biodegradable, thermoresponsive hydrogel designed for application in chronic infarcted myocardium. , 2009, Biomaterials.

[107]  W. Hennink,et al.  Poly(N-isopropylacrylamide) with hydrolyzable lactic acid ester side groups: a new type of thermosensitive polymer , 1999 .

[108]  M. Djabourov,et al.  All Gelatin Networks: 1. Biodiversity and Physical Chemistry† , 2002 .

[109]  Allan S Hoffman,et al.  Hydrogels for biomedical applications. , 2002, Advanced drug delivery reviews.

[110]  M. Horne,et al.  Enhancing neurite outgrowth from primary neurones and neural stem cells using thermoresponsive hydrogel scaffolds for the repair of spinal cord injury. , 2009, Journal of biomedical materials research. Part A.

[111]  Keun-Hong Park,et al.  The use of injectable, thermosensitive poly(organophosphazene)-RGD conjugates for the enhancement of mesenchymal stem cell osteogenic differentiation. , 2009, Biomaterials.

[112]  A. Higuchi,et al.  Temperature-induced cell detachment on immobilized pluronic surface. , 2006, Journal of biomedical materials research. Part A.

[113]  O. Corrigan,et al.  Effect of drug physicochemical properties on swelling/deswelling kinetics and pulsatile drug release from thermoresponsive poly(N-isopropylacrylamide) hydrogels. , 2004, Journal of controlled release : official journal of the Controlled Release Society.

[114]  J. Leroux,et al.  Novel injectable neutral solutions of chitosan form biodegradable gels in situ. , 2000, Biomaterials.

[115]  M. Horne,et al.  Morphology and gelation of thermosensitive xyloglucan hydrogels. , 2006, Biophysical chemistry.

[116]  D. S. Lee,et al.  Functionalized injectable hydrogels for controlled insulin delivery. , 2008, Biomaterials.

[117]  Kevin E. Healy,et al.  Synthesis and characterization of injectable poly(N-isopropylacrylamide)-based hydrogels that support tissue formation in vitro , 1999 .

[118]  Tae Gwan Park,et al.  Thermo-sensitive and biodegradable hydrogels based on stereocomplexed Pluronic multi-block copolymers for controlled protein delivery. , 2008, Journal of controlled release : official journal of the Controlled Release Society.

[119]  Xiao Huang,et al.  Biodegradable thermoresponsive hydrogels for aqueous encapsulation and controlled release of hydrophilic model drugs. , 2005, Biomacromolecules.

[120]  N. Tirelli,et al.  A new process for cell microencapsulation and other biomaterial applications: Thermal gelation and chemical cross-linking in “tandem” , 2005, Journal of materials science. Materials in medicine.

[121]  Chee Yoon Yue,et al.  Thermally Induced Association and Dissociation of Methylcellulose in Aqueous Solutions , 2002 .

[122]  Daniel Cohn,et al.  Improved reverse thermo-responsive polymeric systems. , 2003, Biomaterials.

[123]  N. Peppas Physiologically Responsive Hydrogels , 1991 .

[124]  Michelle C LaPlaca,et al.  Thermoreversible laminin-functionalized hydrogel for neural tissue engineering. , 2006, Journal of biomedical materials research. Part A.

[125]  C. Laurencin,et al.  Development of injectable thermogelling chitosan-inorganic phosphate solutions for biomedical applications. , 2007, Biomacromolecules.

[126]  E. Nieschlag,et al.  Hormone substitution in male hypogonadism , 2000, Molecular and Cellular Endocrinology.

[127]  A. Domb,et al.  Chitosan chemistry and pharmaceutical perspectives. , 2004, Chemical reviews.

[128]  K. Matyjaszewski,et al.  Synthesis and in situ atomic force microscopy characterization of temperature-responsive hydrogels based on poly(2-(dimethylamino)ethyl methacrylate) prepared by atom transfer radical polymerization. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[129]  K. Br,et al.  Current status of DNA vaccines in veterinary medicine. , 2000 .

[130]  Y. Shao,et al.  Preparation, properties and controlled release behaviors of pH-induced thermosensitive amphiphilic gels. , 2006, Biomaterials.

[131]  L. Brannon-Peppas,et al.  Preparation of interpenetrating networks of gelatin and dextran as degradable biomaterials. , 2000, Biomaterials.

[132]  A. Higuchi,et al.  Bioinert surface of pluronic-immobilized flask for preservation of hematopoietic stem cells. , 2006, Biomacromolecules.

[133]  R. Gurny,et al.  A novel thermoresponsive hydrogel based on chitosan. , 2008, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[134]  I. Antal,et al.  Potential application of Metolose in a thermoresponsive transdermal therapeutic system. , 2007, International journal of pharmaceutics.