A Six-sigma approach for benchmarking of RP&M processes

This paper presents a methodology of using six-sigma quality tools for benchmarking of rapid prototyping & manufacturing (RP&M) processes. It involves the fabrication of a geometric benchmark part and a methodology to control and identify the best performance of the process to reduce the variablity in the fabricated parts. The approach is demonstrated with a case study based on the direct laser sintering (DLS) process for prototyping using plastic powder. In the case study an identified set of six-sigma/ statistical process control tools is employed to determine and best tune factors affecting the desired outcomes of the built parts.

[1]  John K. Jackman,et al.  A Probabilistic View of Problems in Form Error Estimation , 1997 .

[2]  Andrea Gatto,et al.  Benchmarking of Rapid Prototyping Techniques in Terms of Dimensional Accuracy and Surface Finish , 1995 .

[3]  Xiangwei Wang.  Calibration of shrinkage and beam offset in SLS process , 1999 .

[4]  Kornel Ehmann,et al.  A dynamic model of the rolling process. Part I: homogeneous model , 2000 .

[5]  Robert Parsons.  Statistical Analysis: A Decision-Making Approach , 1974 .

[6]  Jean-Pierre Kruth,et al.  Material incress manufacturing by rapid prototyping techniques , 1991 .

[7]  Paul Leonard,et al.  Practical Benchmarking: The Complete Guide , 1994 .

[8]  Georges M. Fadel,et al.  Accuracy issues in CAD to RP translations , 1996 .

[9]  David W. Rosen,et al.  A process planning method for improving build performance in stereolithography , 2001, Comput. Aided Des..

[10]  R. Dunsmore,et al.  Statistical Analysis: A Decision-Making Approach. , 1979 .

[11]  Debasish Dutta,et al.  A review of process planning techniques in layered manufacturing , 2000 .

[12]  Amit Bagchi,et al.  Benchmarking of Rapid Prototyping Systems - Beginning to Set Standards , 1994 .

[13]  Han Tong Loh,et al.  Benchmarking for comparative evaluation of RP systems and processes , 2004 .

[14]  T.H.C. Childs,et al.  Linear and Geometric Accuracies from Layer Manufacturing , 1994 .

[15]  L. Iuliano,et al.  A new user part for performances evaluation of rapid prototyping systems , 1994 .

[16]  Robert C. Camp,et al.  Benchmarking: The Search for Industry Best Practices That Lead to Superior Performance , 1989 .

[17]  Jason Lowther.  Practitioner's Guide to Quality and Process Improvement , 1993 .

[18]  Walter T. Morgan.  Six Sigma and Beyond: Statistical Process Control , 2004, Technometrics.

[19]  Madhan Shridhar Phadke,et al.  Quality Engineering Using Robust Design , 1989 .

[20]  Eric R Ziegel,et al.  Six Sigma and Beyond: The Implementation Process , 2004, Technometrics.

[21]  Kevin K. Jurrens,et al.  Standards for the rapid prototyping industry , 1999 .

[22]  Jack G. Zhou,et al.  PARAMETRIC PROCESS OPTIMIZATION TO IMPROVE THE ACCURACY OF RAPID PROTOTYPED STEREOLITHOGRAPHY PARTS , 2000 .