Fast synthesis of permanent magnet assisted synchronous reluctance motors

This paper describes a procedure for a practical synthesis of both a synchronous reluctance motor and a permanent magnet assisted synchronous reluctance motor. The procedure is completely analytical, yielding a rapid drawing of the motor geometry, taking into account both magnetic and mechanical considerations. From the application requirements, the external volume of the motor is computed. The further practical needs, such as maximum outer space, maximum available length, existing stator lamination, and so on are considered. Then, the design of the rotor geometry is carried out. The PM size is determined considering the demagnetisation limit according to the maximum current loading.

[1]  N. Bianchi,et al.  Design of a Low-Torque-Ripple Fractional-Slot Interior Permanent-Magnet Motor , 2014, IEEE Transactions on Industry Applications.

[2]  N. Bianchi,et al.  Rotor Flux-Barrier Design for Torque Ripple Reduction in Synchronous Reluctance and PM-Assisted Synchronous Reluctance Motors , 2009, IEEE Transactions on Industry Applications.

[3]  T. Jahns,et al.  Torque Ripple Reduction in Interior Permanent Magnet Synchronous Machines Using Stators With Odd Number of Slots Per Pole Pair , 2010, IEEE Transactions on Energy Conversion.

[4]  Nicola Bianchi,et al.  Sensitivity analysis of torque ripple reduction of synchronous reluctance and interior PM motors , 2013, 2013 IEEE Energy Conversion Congress and Exposition.

[5]  S. Williamson,et al.  Direct finite element design optimisation of the cageless reluctance synchronous machine , 1996 .

[6]  Gianmario Pellegrino,et al.  Design of Ferrite-Assisted Synchronous Reluctance Machines Robust Toward Demagnetization , 2014, IEEE Transactions on Industry Applications.

[7]  P. Guglielmi,et al.  Cross-Saturation Effects in IPM Motors and Related Impact on Sensorless Control , 2006, IEEE Transactions on Industry Applications.

[8]  Gianmario Pellegrino,et al.  Multipolar Ferrite-Assisted Synchronous Reluctance Machines: A General Design Approach , 2015, IEEE Transactions on Industrial Electronics.

[9]  Seung-Ki Sul,et al.  Comparison of PM Motor Structures and Sensorless Control Techniques for Zero-Speed Rotor Position Detection , 2006, IEEE Transactions on Power Electronics.

[10]  Thomas M. Jahns,et al.  Pulsating torque minimization techniques for permanent magnet AC motor drives-a review , 1996, IEEE Trans. Ind. Electron..

[11]  Sung-Chul Go,et al.  Optimal PM Design of PMA-SynRM for Wide Constant-Power Operation and Torque Ripple Reduction , 2009, IEEE Transactions on Magnetics.

[12]  Shigeo Morimoto,et al.  Torque ripple improvement for synchronous reluctance motor using an asymmetric flux barrier arrangement , 2003 .

[13]  Massimo Barcaro,et al.  Structural analysis of the interior PM rotor considering both static and fatigue loading , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).