TiC–Fe gradient coating on pure titanium fabricated by in-situ solid-phase diffusion: toward superior hardness and interfacial adhesion strength

[1]  Yifu Shen,et al.  High Temperature Corrosion and Mechanical Properties of TiC-AlSi12 Composite Coating Fabricated on Ti-6Al-4V Alloy Substrate via High-Energy Mechanical Alloying Method , 2023, Journal of Materials Engineering and Performance.

[2]  Yifu Shen,et al.  Oxidation resistant FeCoNiCrAl high entropy alloy/AlSi12 composite coatings with excellent adhesion on Ti-6Al-4 V alloy substrate via mechanical alloying and subsequent laser cladding , 2023, Surface and Coatings Technology.

[3]  S. Xin,et al.  Formation mechanism of interdiffusion layer and mechanical properties of Al0.6CoCrFeNi high-entropy alloy/Ti composites , 2023, Journal of Alloys and Compounds.

[4]  Xianliang Li,et al.  Controllable high adhesion and low friction coefficient in TiAlCN coatings by tuning the C/N ratio , 2022, Applied Surface Science.

[5]  Hong Wang,et al.  Influence of Y2o3 Addition on the Microstructure of Tic Reinforced Ti-Based Composite Coating Prepared by Laser Cladding , 2022, SSRN Electronic Journal.

[6]  W. Cong,et al.  Feasibility study of adding buffer layers for the laser deposition of high-ceramic content (TiB + TiC)–Ti coatings using B4C/Ti powders , 2022, Ceramics International.

[7]  X. Guo,et al.  Combined effect of laser texturing and carburizing on the bonding strength of DLC coatings deposited on medical titanium alloy , 2022, Surface and Coatings Technology.

[8]  P. Aswath,et al.  Interfacial Adhesion and Surface Bioactivity of Anodized Titanium Modified with SiON and SiONP Surface Coatings , 2021, Surfaces and Interfaces.

[9]  Zaoli Zhang,et al.  Bond strength between TiN coating and microstructural constituents of a high speed steel determined by first principle calculations , 2021, Acta Materialia.

[10]  Feilong Zhou,et al.  Microstructure evolution and properties of in-situ TiC reinforced titanium matrix composites coating by plasma transferred arc welding (PTAW) , 2021 .

[11]  Yaoyao Zhou,et al.  Multilayer-growth of TiAlN/WS self-lubricating composite coatings with high adhesion and their cutting performance on titanium alloy , 2021 .

[12]  Xiaoqiang Hu,et al.  The carbides, tensile properties, and work-hardening behavior of annealed H13 die steels with varied yttrium contents , 2021 .

[13]  D. Duan,et al.  Effect of microstructure on the adhesion strength of TiB coating on Ti6Al4V substrate , 2020 .

[14]  F. Yin,et al.  A design of self-generated Ti–Al–Si gradient coatings on Ti–6Al–4V alloy based on silicon concentration gradient , 2020 .

[15]  Zhihua Wang,et al.  In-situ fabrication of gradient titanium oxide ceramic coating on laser surface textured Ti6Al4V alloy with improved mechanical property and wear performance , 2020, Vacuum.

[16]  Suiyuan Chen,et al.  Microstructure and wear behaviors of laser cladding in-situ synthetic (TiBx+TiC)/(Ti2Ni+TiNi) gradient composite coatings , 2020, Vacuum.

[17]  Yaoyao Zhou,et al.  Effect of high hardness and adhesion of gradient TiAlSiN coating on cutting performance of titanium alloy , 2020 .

[18]  Han Huang,et al.  Microstructures and mechanical properties of wear-resistant titanium oxide coatings deposited on Ti-6Al-4V alloy using laser cladding , 2020 .

[19]  Yunhua Xu,et al.  Fabrication of TaC coating on tantalum by interstitial carburization , 2019, Journal of Alloys and Compounds.

[20]  J. Blackburn,et al.  Microstructure, formation mechanism and property characterization of Ti + SiC laser cladded coatings on Ti6Al4V alloy , 2019, Materials Characterization.

[21]  M. Razavi,et al.  Fabrication of functionally graded Fe-TiC wear resistant coating on CK45 steel substrate by plasma spray and evaluation of mechanical properties , 2018, Ceramics International.

[22]  Weitao Zheng,et al.  Self-assembly of TaC@Ta core–shell-like nanocomposite film via solid-state dewetting: Toward superior wear and corrosion resistance , 2018, Acta Materialia.

[23]  L. Qiao,et al.  Cleavage cracking of ductile-metal substrates induced by brittle coating fracture , 2018, Acta Materialia.

[24]  Marc A. Meyers,et al.  Functional gradients and heterogeneities in biological materials: Design principles, functions, and bioinspired applications , 2017 .

[25]  Y. Lei,et al.  A study of TiB2/TiB gradient coating by laser cladding on titanium alloy , 2016 .

[26]  Pengting Li,et al.  Morphological evolution of TiC from octahedron to cube induced by elemental nickel , 2012 .

[27]  M. Savalani,et al.  In situ formation of titanium carbide using titanium and carbon-nanotube powders by laser cladding , 2012 .

[28]  Yongyong He,et al.  Comparison of tribological properties of nitrided Ti-N modified layer and deposited TiN coatings on TA2 pure titanium , 2022, Tribology International.

[29]  Yunhua Xu,et al.  A review on wear-resistant coating with high hardness and high toughness on the surface of titanium alloy , 2021 .