A concept design of supercritical CO2 cooled SMR operating at isolated microgrid region

Summary Most of the small modular reactor (SMR) concepts developed in the past have compact size and a longer life reactor core than the conventional nuclear power plants. However, these concepts have not achieved the full modularization including power conversion system. This study suggests an innovative concept of a reactor cooled by supercritical state carbon dioxide (S-CO2). A reactor core with uranium carbide fuel controlled by drum type control rods was designed. The core has long life (20 years) without refueling or reshuffling as well as inherent safety features. The reactor can be used as a distributed power source and replace outdated fossil fuel power plants for small cities. Moreover, the authors propose the S-CO2 Brayton cycle as a power conversion system to achieve compact and lightweight module. Because of compact core and power conversion system, the entire system can be contained in a single module. The target of the system is to be able to transport a single core and power conversion system module via ground transportation. In order to meet this target, single module's total weight is minimized in the order of 100 tons. The external size of a module is less than 7 m in length and 4 m in diameter. It produces 12MWe electricity from 36MWt reactor core. The S-CO2 Brayton cycle was optimized, and the cycle components such as turbomachineries and heat exchangers were designed preliminarily to observe the potential to maximize the performance while minimizing the weight. Moreover, a dry air-cooling option to reject waste heat for inland installation was selected for the suggested nuclear system. A concept of passive decay heat removal system was developed, and its performance was examined to determine the required heat removal capacity of the system to assure the system's safety under various anticipated accidents. Copyright © 2016 John Wiley & Sons, Ltd.

[1]  Kais Atallah,et al.  Design, analysis and realisation of a high-performance magnetic gear , 2004 .

[2]  Jeong-Ik Lee,et al.  Study of various Brayton cycle designs for small modular sodium-cooled fast reactor , 2014 .

[3]  Ho-Sang Ra,et al.  Development of the turbomachinery for the supercritical carbon dioxide power cycle , 2014 .

[4]  Jeong Ik Lee,et al.  Various supercritical carbon dioxide cycle layouts study for molten carbonate fuel cell application , 2014 .

[5]  Gary E Rochau,et al.  Supercritical CO2 recompression Brayton cycle : completed assembly description. , 2012 .

[6]  Kazuhiko Kunitomi,et al.  Evaluation of GTHTR300A nuclear power plant design with dry cooling , 2014 .

[7]  Michael J. Driscoll,et al.  Optimized Core Design of a Supercritical Carbon Dioxide-Cooled Fast Reactor , 2008 .

[8]  Ahmad Al Rashdan,et al.  Supercritical CO2 direct cycle Gas Fast Reactor (SC-GFR) concept. , 2011 .

[9]  Youho Lee,et al.  Structural assessment of intermediate printed circuit heat exchanger for sodium-cooled fast reactor with supercritical CO2 cycle , 2014 .

[10]  M. Driscoll,et al.  Thermal Hydraulic Challenges of Gas Cooled Fast Reactors with Passive Safety Features , 2009 .

[11]  Vaclav Dostal,et al.  A supercritical carbon dioxide cycle for next generation nuclear reactors , 2004 .

[12]  Robert E. Reid,et al.  GE LM2500 Marine Gas Turbine Experience Update , 1991 .

[13]  Gary E Rochau,et al.  Operation and analysis of a supercritical CO2 Brayton cycle. , 2010 .

[14]  Seong Gu Kim,et al.  CFD investigation of a centrifugal compressor derived from pump technology for supercritical carbon dioxide as a working fluid , 2014 .

[15]  Jeong-Ik Lee,et al.  Supercritical Carbon Dioxide turbomachinery design for water-cooled Small Modular Reactor application , 2014 .

[16]  Jan Fokkens,et al.  Promising designs of compact heat exchangers for modular HTRs using the Brayton cycle , 2008 .

[17]  Seong Gu Kim,et al.  Design consideration of supercritical CO2 power cycle integral experiment loop , 2015 .

[18]  Jeong-Ik Lee,et al.  CFD aided approach to design printed circuit heat exchangers for supercritical CO2 Brayton cycle application , 2016 .

[19]  Seong Gu Kim,et al.  SCO2PE Operating Experience and Validation and Verification of KAIST_TMD , 2013 .

[20]  Jeong-Ik Lee,et al.  Preliminary studies of compact Brayton cycle performance for Small Modular High Temperature Gas-cooled Reactor system , 2015 .

[21]  Jeong-Ik Lee,et al.  Potential advantages of coupling supercritical CO2 Brayton cycle to water cooled small and medium size reactor , 2012 .