Impact of graphite foil rolling on the thermal field homogeneity of spark plasma sintering

[1]  E. Olevsky,et al.  Flash sintering of complex shapes , 2022, Applied Materials Today.

[2]  F. Charlot,et al.  Effect of Electric Current on SPS Densification of Spherical Copper Powder , 2021, Journal of Manufacturing and Materials Processing.

[3]  S. Marinel,et al.  Flash spark plasma sintering of zirconia nanoparticles: Electro-thermal-mechanical-microstructural simulation and scalability solutions , 2021, Journal of the European Ceramic Society.

[4]  R. Epherre,et al.  Simple method for the identification of electrical and thermal contact resistances in spark plasma sintering , 2021, Journal of the European Ceramic Society.

[5]  Behzad Ghasemi,et al.  The effect of mechanical alloying time on the microstructural and mechanical properties of spark plasma sintered Ta–10W , 2020 .

[6]  T. Yuan,et al.  Effect of electric current on crystal orientation and its contribution to densification during spark plasma sintering , 2018, Materials Letters.

[7]  E. Olevsky,et al.  Energy efficient spark plasma sintering: Breaking the threshold of large dimension tooling energy consumption , 2018, Journal of the American Ceramic Society.

[8]  Christopher D. Haines,et al.  Spark plasma sintering of structure‐tailored ultrahigh‐temperature components: First step to complex net shaping , 2018 .

[9]  Lu Wang,et al.  A multiple grain size distributed Al-based composite consist of amorphous/nanocrystalline, submicron grain and micron grain fabricated through spark plasma sintering , 2018 .

[10]  E. Olevsky,et al.  All-Materials-Inclusive Flash Spark Plasma Sintering , 2017, Scientific Reports.

[11]  H. Desplats,et al.  Contact resistances in spark plasma sintering: From in-situ and ex-situ determinations to an extended model for the scale up of the process , 2017 .

[12]  M. Saâdaoui,et al.  Finite element modeling of spark plasma sintering: Application to the reduction of temperature inhomogeneities, case of alumina , 2017 .

[13]  C. Estournès,et al.  Finite-element modeling of the electro-thermal contacts in the spark plasma sintering process , 2016 .

[14]  Christopher D. Haines,et al.  Experimental Investigation of Electric Contact Resistance in Spark Plasma Sintering Tooling Setup , 2015 .

[15]  C. Estournès,et al.  Pulse analysis and electric contact measurements in spark plasma sintering , 2015 .

[16]  A. Weibel,et al.  Dog-bone copper specimens prepared by one-step spark plasma sintering , 2015, Journal of Materials Science.

[17]  O. Guillon,et al.  Field‐Assisted Sintering Technology/Spark Plasma Sintering: Mechanisms, Materials, and Technology Developments , 2014 .

[18]  F. Golestani-Fard,et al.  Spark plasma sintering of TaC–HfC UHTC via disilicides sintering aids , 2013 .

[19]  Christopher D. Haines,et al.  Localized Overheating Phenomena and Optimization of Spark-Plasma Sintering Tooling Design , 2013, Materials.

[20]  M. Herrmann,et al.  Silicon nitride nanoceramics densified by dynamic grain sliding , 2010 .

[21]  Lai-fei Cheng,et al.  FEM analysis of the temperature and stress distribution in spark plasma sintering: Modelling and experimental validation , 2010 .

[22]  H. Seifert,et al.  Densification behaviour of pure molybdenum powder by spark plasma sintering , 2010 .

[23]  Guo‐Jun Zhang,et al.  Ultrahigh temperature ceramics (UHTCs) based on ZrB2 and HfB2 systems: Powder synthesis, densification and mechanical properties , 2009 .

[24]  Y. Sakka,et al.  Moving finite-element mesh model for aiding spark plasma sintering in current control mode of pure ultrafine WC powder , 2009, Journal of Materials Science.

[25]  H. Mishina,et al.  Fabrication of ZrO2/AISI316L functionally graded materials for joint prostheses , 2008 .

[26]  J. Galy,et al.  Relaxor behavior, polarization buildup, and switching in nanostructured 0.92 PbZn1/3Nb2/3O3-0.08 PbTiO3 ceramics. , 2007, Small.

[27]  Zuhair A. Munir,et al.  Fundamental investigations on the spark plasma sintering/synthesis process: III. Current effect on reactivity , 2005 .

[28]  M. Yovanovich,et al.  Four decades of research on thermal contact, gap, and joint resistance in microelectronics , 2005, IEEE Transactions on Components and Packaging Technologies.

[29]  Zuhair A. Munir,et al.  Fundamental investigations on the spark plasma sintering/synthesis process: II. Modeling of current and temperature distributions , 2005 .

[30]  H. Awaji,et al.  Properties of multilayered mullite/Mo functionally graded materials fabricated by powder metallurgy processing , 2005 .

[31]  J. Groza,et al.  Temperature evolution during field activated sintering , 2004 .

[32]  Khiam Aik Khor,et al.  Laminated and functionally graded hydroxyapatite/yttria stabilized tetragonal zirconia composites fabricated by spark plasma sintering. , 2003, Biomaterials.

[33]  A. Weibel,et al.  Spark-plasma-sintering and finite element method: From the identification of the sintering parameters of a submicronic α-alumina powder to the development of complex shapes , 2016 .