Tribological behaviors of single and dual sol-gel ceramic films on Ti-6Al-4V

[1]  Lin Li,et al.  Combined laser/sol–gel synthesis of calcium silicate coating on Ti–6Al–4V substrates for improved cell integration , 2007 .

[2]  Jean Michel,et al.  Electrochemical and structural characterisation of zirconia reinforced hydroxyapatite bioceramic sol–gel coatings on surgical grade 316L SS for biomedical applications , 2007 .

[3]  S. Radin,et al.  Controlled release of vancomycin from thin sol-gel films on titanium alloy fracture plate material. , 2007, Biomaterials.

[4]  D. Remiens,et al.  Mechanical properties measured by nano-indentation of Pb(Zr, Ti)03 sol–gel films deposited on Pt and LaNi03 electrodes , 2006 .

[5]  T. Hübert,et al.  Wear resistant alumina coatings produced by a sol–gel process , 2006 .

[6]  Yung‐Chin Yang,et al.  Bonding Strength Investigation of Plasma-sprayed HA Coatings on Alumina Substrate with Porcelain Intermediate Layer , 2006, International Thermal Spray Conference.

[7]  D. G. Teer,et al.  The study of the adhesion of a TiN coating on steel and titanium alloy substrates using a multi-mode scratch tester , 2006 .

[8]  Zhihong Wang,et al.  Characterization of composite piezoelectric thick film for MEMS application , 2005 .

[9]  D. Zaffe,et al.  Accumulation of aluminium in lamellar bone after implantation of titanium plates, Ti-6Al-4V screws, hydroxyapatite granules. , 2004, Biomaterials.

[10]  J. Jansen,et al.  In vivo dissolution behavior of various RF magnetron-sputtered Ca-P coatings on roughened titanium implants. , 2003, Biomaterials.

[11]  Takashi Nakamura,et al.  XPS study of the process of apatite formation on bioactive Ti—6Al—4V alloy in simulated body fluid , 2001 .

[12]  S. Radin,et al.  Microstructure and fretting behavior of hard TiN-based coatings on surgical titanium alloys , 2000 .

[13]  D. Puleo,et al.  Understanding and controlling the bone-implant interface. , 1999, Biomaterials.

[14]  G. Gnappi,et al.  XPS study of apatite-based coatings prepared by sol-gel technique , 1999 .

[15]  R. W. Linton,et al.  X-ray photoelectron spectroscopy of thermally treated silica (SiO2) surfaces , 1985 .

[16]  D. Hercules,et al.  Surface spectroscopic characterization of Cu/Al2O3 catalysts , 1985 .

[17]  D. Hercules,et al.  Surface spectroscopic characterization of manganese/aluminum oxide catalysts , 1984 .

[18]  W. Landis,et al.  X‐ray photoelectron spectroscopy applied to gold‐decorated mineral standards of biological interest , 1984 .

[19]  O. Brümmer,et al.  Corundum Structure Oxides Studied by XPS , 1983 .

[20]  A. Vadiraj,et al.  Effect of surface treatments on fretting fatigue damage of biomedical titanium alloys , 2007 .

[21]  V. Liedtke,et al.  Manufacturing and performance testing of sol/gel based oxidation protection systems for re-usable space vehicles , 2007 .

[22]  Lili Hu,et al.  Optical and surface properties of hybrid TiO2/ormosil planar waveguide prepared by the sol–gel process , 2006 .

[23]  B. Raj,et al.  Failures of Stainless Steel Orthopedic Devices - Causes and Remedies , 2003 .

[24]  S. Sinha,et al.  XPS studies of nitrogen ion implanted zirconium and titanium , 1989 .