Mechanical behaviour of a stone masonry bridge assessed using an implicit discrete element method

Abstract The aim of this study is to investigate the effect of different types of static loadings on the mechanical behaviour of a standard arch bridge and a masonry stone bridge in real scale. The mechanical analyses are performed using the Non-Smooth Contact Dynamic method (NSCD) known as an implicit discrete element method. After a brief description of the NSCD method, the stability state analysis is carried out over a classic stone arch in order to demonstrate the efficiency of this numerical method to reveal the diverse collapse mechanisms happening in the masonry structures under several static loading conditions. For the analysis of a real masonry structure, the roman stone bridge of the Pont Julien in Vaucluse (South of France) is studied, based on site measurements, under an academic loading, to show the capacity of the method to take into account heterogeneous loading patterns.

[1]  Thomas E. Boothby,et al.  Three-dimensional modelling and full-scale testing of stone arch bridges , 2001 .

[2]  J. Moreau,et al.  Unilateral Contact and Dry Friction in Finite Freedom Dynamics , 1988 .

[3]  J. Moreau.  An introduction to Unilateral Dynamics , 2004 .

[4]  Bernard Cambou,et al.  Micromécanique des matériaux granulaires , 2001 .

[5]  Nenad Bićanić,et al.  Computational framework for discontinuous modelling of masonry arch bridges , 2001 .

[6]  Ali Rafiee,et al.  Modelling and analysis of the Nîmes arena and the Arles aqueduct subjected to a seismic loading, using the Non-Smooth Contact Dynamics method , 2008 .

[7]  Paulo B. Lourenço,et al.  Failure analysis of Monastery of Jerónimos, Lisbon: How to learn from sophisticated numerical models , 2007 .

[8]  Jacques Heyman,et al.  The stone skeleton , 1995 .

[9]  Ali Rafiee,et al.  Application of the NSCD method to analyse the dynamic behaviour of stone arched structures , 2008 .

[10]  Thanut Kallaka,et al.  Efficient Numerical Model for Studying Bridge Pier Collapse in Floods , 2011 .

[11]  Daniel V. Oliveira,et al.  Experimental and numerical analysis of blocky masonry structures under cyclic loading , 2003 .

[12]  Michel Saint Jean,et al.  The non-smooth contact dynamics method , 1999 .

[13]  Georgios E. Stavroulakis,et al.  Limit analysis of a single span masonry bridge with unilateral frictional contact interfaces , 2006 .

[14]  P. Lourenço,et al.  Three-dimensional limit analysis of rigid blocks assemblages. Part I: Torsion failure on frictional interfaces and limit analysis formulation , 2005 .

[15]  Claude Bohatier,et al.  NSCD discrete element method for modelling masonry structures , 2005 .

[16]  Vincent Acary,et al.  Nscd method applied to mechanical simulation of masonry in historical buildings using moma , 1999 .

[17]  Luca Pelà,et al.  Seismic assessment of masonry arch bridges , 2009 .

[18]  Katalin Bagi,et al.  Discrete element analysis of a stone masonry arch , 2009 .

[19]  Paulo B. Lourenço,et al.  Three-dimensional limit analysis of rigid blocks assemblages. Part II : load-path following solution procedure and validation , 2005 .

[20]  Matthew Gilbert,et al.  Load-carrying capacity of flooded masonry arch bridges , 2006 .

[21]  Frédéric Dubois,et al.  Micro-rheology of dense particulate flows: Application to immersed avalanches , 2011 .

[22]  Vincent Richefeu,et al.  Contact dynamics as a nonsmooth discrete element method , 2009 .