Proof-testing and probabilistic lifetime estimation of glass fibers for sensor applications.

The mechanical reliability of sensing glass fiber is one of the important problems in the practical use of fiber-optic sensors. To ensure long-term reliability on a mass-production level, a method of proof-testing is applied to a sensing glass fiber that will be subjected to mechanical deformation in its service situation. We propose to employ a higher strain level (screening level) in the proof-testing with a fiber-recoating technique that can suppress excessive damage during the testing. We consider a standard lifetime of 15 years of automotive applications and ensure a practical level of failure probability by a model calculation by using the strength data of a prototype fiber with the method of fracture-mechanics theory.

[1]  A. G. Evans,et al.  Proof testing of ceramic materials—an analytical basis for failure prediction , 1974 .

[2]  Robert D. Maurer,et al.  Tensile strength and fatigue of optical fibers , 1976 .

[3]  R. Adams,et al.  Static fatigue in glass , 1977 .

[4]  David Kalish,et al.  Static and Dynamic Fatigue of a Polymer‐Coated Fused Silica Optical Fiber , 1978 .

[5]  Yutaka Katsuyama,et al.  Failure prediction for long length optical fiber based on proof testing , 1982 .

[6]  R. G. Priest,et al.  Optical fiber sensor technology , 1982, 1985 International Electron Devices Meeting.

[7]  C. M. Davis,et al.  Fiber Optic Sensors: An Overview , 1985 .

[8]  Gerhard P. Hancke,et al.  A fiber-optic density sensor for monitoring the state-of-charge of a lead acid battery , 1989 .

[9]  Studies of displacement sensing based on the deformation loss of an optical fiber ring , 1991 .

[10]  Hiroyuki Abe,et al.  Effect of Humidity on Small‐Crack Growth in Silica Optical Fibers , 1993 .

[11]  J. W. Berthold,et al.  Historical review of microbend fiber-optic sensors , 1995 .

[12]  Probabilistic Failure Prediction for Silica Optical Fibers Based on the Exponential Law. , 1995 .

[13]  Ph. Tsalides,et al.  A low-cost fiber optic force sensor , 1996 .

[14]  M. Komachiya,et al.  Multiplex in-cylinder pressure measurement utilizing an optical fiber with specific refractive-index composition. , 1996, Applied optics.

[15]  Hiroyuki Abe,et al.  Subcritical Crack Growth in Silica Optical Fibers in Wide Range of Crack Velocities , 1996 .

[16]  T Sasayama,et al.  Knocking Detection of a Gasoline Engine by Utilizing an Optical Fiber with Specific Refractive-index Composition. , 1998, Applied optics.

[17]  Nobuo Kurihara,et al.  A Method of Misfire Detection by Superposing Outputs of Combustion Pressure Sensors , 1998 .

[18]  Mechanical Properties of a Polyimide Coat for Fiber-optic Sensors , 1999 .