Load capacity and crack development characteristics of HCWA–DSF high strength mortar ferrocement panels in flexure

Abstract In accordance to current technological advancements in the field of sustainable construction materials, high calcium wood ash (HCWA), a by-product from the biomass power generation sector, has been established as a highly viable supplementary binder material for the production of concrete and mortar. The research study was performed with the aim to investigate the effects of the inclusion of HCWA as a supplementary binder material. These effects were measured on the structural parametric response, crack development behaviour and ultimate failure mode of fabricated ferrocement flexural panels using HCWA mortar. Ferrocement flexural panels were subjected to four point flexural test till ultimate failure throughout the study. Mortars used in the fabrication of the ferrocement panels contained varying HCWA cement replacement levels from 2% to 10% by total binder weight. At the same time, all other experimental parameters of the ferrocement panels remained constant. The experimental results of 21 ferrocement panels indicated that the fabricated ferrocement panels fabricated with HCWA content up to 4% by binder weight exhibited superior structural performance as compared to the control ferrocement panels with no HCWA content. Structural performance parameters used for comparisons were the first crack load, ultimate failure load, deflection of energy absorbed to trigger ultimate failure, flexure stress–deflection response and flexure stress–concrete strain response. The number of cracks developed at failure was also taken into account with measurements of average crack width, crack spacing and failure mode. The inclusion of HCWA in the mortar within the ferrocement panels not only enhances the engineering performance of the panels but also contributes to potential binder material savings and resource conservation.

[1]  S P Shah,et al.  MOMENT CAPACITY AND CRACKING BEHAVIOUR OF FERROCEMENT IN FLEXURE , 1973 .

[2]  Augustine Uchechukwu Elinwa,et al.  Assessing of the fresh concrete properties of self-compacting concrete containing sawdust ash , 2008 .

[3]  Hilary I. Inyang,et al.  Potential of Wood Waste Ash as an Additive in Concrete , 2006 .

[4]  A. Naaman.  DESIGN PREDICTIONS OF CRACK WIDTHS IN FERROCEMENT, FERROCEMENT-MATERIALS AND APPLICATIONS , 1979 .

[5]  M. Ramli,et al.  Properties of high calcium wood ash and densified silica fume blended cement , 2011 .

[6]  Mahyuddin Ramli,et al.  The implementation of wood waste ash as a partial cement replacement material in the production of structural grade concrete and mortar: An overview , 2011 .

[7]  S. Ejeh,et al.  Effects of the Incorporation of Sawdust Waste Incineration Fly Ash in Cement Pastes and Mortars , 2004 .

[8]  A. Neville.  Properties of Concrete , 1968 .

[9]  Antoine E. Naaman,et al.  ANALYSIS AND BEHAVIOR OF FERROCEMENT IN FLEXURE , 1977 .

[10]  M. Ramli,et al.  Mechanical behaviour of polymer-modified ferrocement under different exposure conditions: An experimental study , 2012 .

[11]  L. Baxter,et al.  Durability of biomass fly ash concrete : Freezing and thawing and rapid chloride permeability tests , 2008 .

[12]  F. F. Udoeyo,et al.  Sawdust Ash as Concrete Material , 2002 .

[13]  W. H. Mosley,et al.  Reinforced Concrete Design to Eurocode 2 , 1996 .

[14]  Antoine E. Naaman,et al.  Ferrocement & Laminated Cementitious Composites , 2000 .

[15]  M. Mannan,et al.  Flexural Behaviour of Reinforced Lightweight Concrete Beams Made with Oil Palm Shell (OPS) , 2006 .

[16]  A. Elinwa,et al.  Ash from timber waste as cement replacement material , 2002 .

[17]  Brahim Benmokrane,et al.  Behaviour of one-way concrete slabs reinforced with CFRP grid reinforcements , 2004 .

[18]  R. Swamy,et al.  Flexural behaviour of reinforced concrete beams made with fly ash coarse aggregates , 1984 .

[19]  M. Ramli,et al.  Mechanical strength, durability and drying shrinkage of structural mortar containing HCWA as partial replacement of cement , 2012 .

[20]  Larry L. Baxter,et al.  Biomass fly ash in concrete: Mixture proportioning and mechanical properties , 2008 .

[21]  G. J. Al-Sulaimani,et al.  Flexural behavior of ferrocement sandwich panels , 1991 .

[22]  Marc-André Bérubé,et al.  Effects of alkali addition on the mechanical properties and durability of concrete , 2005 .

[23]  Surendra P. Shah,et al.  GUIDE FOR THE DESIGN, CONSTRUCTION, AND REPAIR OF FERROCEMENT. , 1988 .

[24]  C. Johnston,et al.  Ferrocement—Material Behavior in Flexure , 1974 .

[25]  S. Ejeh,et al.  Using Metakaolin to Improve Sawdust-Ash Concrete , 2005 .

[26]  M. Shannag.  Bending behavior of ferrocement plates in sodium and magnesium sulfates solutions , 2008 .

[27]  Characterisation of High Calcium Wood Ash for Use as a Constituent in Wood Ash-Silica Fume Ternary Blended Cement , 2011 .

[28]  Khalifa S. Al-Jabri,et al.  Ultimate and service behavior of ferrocement roof slab panels , 2005 .

[29]  M. Shannag,et al.  Flexural response of ferrocement with fibrous cementitious matrices , 2007 .