Influence of Material Properties and Geometric Shape of Magnetic Cores on Acoustic Noise Emission of Medium-Frequency Transformers

Medium-voltage, medium-frequency transformers (MFTs) are much smaller in size and weight compared to conventional line frequency transformers. MFTs are very attractive for applications where full control of the power flow and high power density are required, such as power electronic interfaces in smart grids and traction converter systems. Because of the switching loss of high-voltage semiconductor switches and the limitation of volume reduction at high frequency due to isolation requirement, MFTs are usually operated in the kHz range, which results in acoustic noise emission. In this paper, the origins of acoustic noise associated with MFTs are investigated based on vibration and acoustic measurements. The work focuses on the influence of material properties and geometric shape of the magnetic core. Based on the measurement results, nanocrystalline uncut cores with oval shape is the best solution for MFT design regarding high efficiency, high power density, and low acoustic noise emission. Finally, the low acoustic noise emission of a prototype transformer built with nanocrystalline uncut cores is verified by measurement. The winding is found to have major contribution to transformer acoustic noise if the low-magnetostrictive uncut core is used.

[1]  Tang Yun-Qiu,et al.  Numerical calculation of short circuit electromagnetic forces on the transformer winding , 1990 .

[2]  J. Roivainen Unit-wave response-based modeling of electromechanical noise and vibration of electrical machines , 2009 .

[3]  Johann W. Kolar,et al.  Solid-State-Transformers: Key Components of Future Traction and Smart Grid Systems , 2014 .

[4]  Yeong-Hwa Chang,et al.  Reducing audible noise for distribution transformer with HB1 amorphous core , 2011 .

[5]  A. W. Kelley,et al.  Measurement of spacecraft power transformer acoustic noise , 1990 .

[6]  S. Wada,et al.  On the loss and magnetostriction of electrical steel for the dc superposed flux alternation , 1980 .

[7]  Kaixing Hong,et al.  Power Transformer Fault Diagnosis Based on Vibration Correlation Analysis , 2014 .

[8]  Zhuoxiang Ren,et al.  Comparison of different force calculation methods in 3D finite element modelling , 1994 .

[9]  Jin Zhijian,et al.  A Vibration Method for Identifying the Looseness of Windings for Large Power Transformers , .

[10]  Anouar Belahcen,et al.  Magnetoelasticity, magnetic forces and magnetostriction in electrical machines , 2004 .

[11]  Irma Villar,et al.  Multiphysical Characterization of Medium-Frequency Power Electronic Transformers , 2010 .

[12]  Stephan Voss,et al.  The role of load harmonics in audible noise of electrical transformers , 2014 .

[13]  Jurgen Biela,et al.  Design and optimization of medium frequency, medium voltage transformers , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).

[14]  Wim Desmet,et al.  On the influence of core laminations upon power transformer noise , 2004 .

[15]  B. Garcia,et al.  Transformer tank vibration modeling as a method of detecting winding deformations-part I: theoretical foundation , 2006, IEEE Transactions on Power Delivery.

[16]  J. Anger,et al.  Relevance of magnetostriction and forces for the generation of audible noise of transformer cores , 2000 .

[17]  Koji Fujiwara,et al.  Design of a Reactor Driven by Inverter Power Supply to Reduce the Noise Considering Electromagnetism and Magnetostriction , 2010, IEEE Transactions on Magnetics.

[18]  F. Anayi,et al.  Magneto-Mechanical Resonance in a Model 3-Phase 3-Limb Transformer Core Under Sinusoidal and PWM Voltage Excitation , 2008, IEEE Transactions on Magnetics.

[19]  Hong Zhong Ma,et al.  Improved Power Transformer Winding Deformation Fault Diagnosis Method , 2014 .

[20]  C. C. Liu,et al.  Frequency dependence of the magnetostrictive phenomenon in Metglas® 2605SA1 ribbon: A minor-loop case , 2014 .

[21]  Olivier Barre,et al.  Acoustic noise emitted by passive components in magnetic devices and design of a low‐noise industrial inductor , 2008 .

[22]  Johann W. Kolar,et al.  Acoustic noise in inductive power components , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).

[23]  Jurgen Biela,et al.  Investigation of acoustic noise sources in medium frequency, medium voltage transformers , 2014, 2014 16th European Conference on Power Electronics and Applications.

[24]  Yeong-Hwa Chang,et al.  Magnetomechanical Vibrations of Three-Phase Three-Leg Transformer With Different Amorphous-Cored Structures , 2011, IEEE Transactions on Magnetics.

[25]  Jean Le Besnerais,et al.  Vibration Reduction of Inductors Under Magnetostrictive and Maxwell Forces Excitation , 2015, IEEE Transactions on Magnetics.

[26]  Kay Hameyer,et al.  Analysis of electromagnetic acoustic noise excitations:: A contribution to low-noise design and to the auralization of electrical machines , 2011 .

[27]  Jurgen Biela,et al.  Impact of core shape and material on the acoustic noise emission of medium frequency, medium voltage transformers , 2015, 2015 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe).

[28]  Pyungwoo Jang,et al.  Acoustic Noise Characteristics and Magnetostriction of Fe-Si Powder Cores , 2012, IEEE Transactions on Magnetics.

[29]  Rainer Hilzinger,et al.  Magnetic Materials: Fundamentals, Products, Properties, Applications , 2013 .

[30]  Stefan Schmitt Acoustic noise of sheeted electrical steel inductors in PWM operation — causes and mitigation , 2009, 2009 13th European Conference on Power Electronics and Applications.

[31]  Yanhui Gao,et al.  Noise Reduction of a Three-Phase Reactor by Optimization of Gaps Between Cores Considering Electromagnetism and Magnetostriction , 2011, IEEE Transactions on Magnetics.

[32]  James H. Harlow,et al.  Electric Power Transformer Engineering , 2003 .

[33]  A. Moses,et al.  Contribution of magnetostriction to transformer noise , 2010, 45th International Universities Power Engineering Conference UPEC2010.