Uncertainty analysis in quantification of steam explosion energetics in a reference Nordic BWR

During the case of a hypothetical severe accident in a light water reactor, core damage may occur and molten fuel may interact with water resulting in explosive interactions. A Fuel-Coolant Interactions (FCI) consists of many complex phenomena whose characteristics determine the energetics of the interactions. The fuel melt initially undergoes fragmentation after contact with the coolant which subsequently increases the melt surface area exposed to coolant and causes rapid heat transfer. A substantial amount of research has been done to understand the phenomenology of FCI, still there are gaps to be filled in terms of the uncertainties in describing the processes such as breakup/fragmentation of melt and droplets.The objective of the present work is to substantiate the understanding in the premixing phase of the FCI process by studying the deformation/pre-fragmentation of melt droplets and also the mechanism of melt jet breakup. The focus of the work is to study the effect of various influential parameters during the premixing phase that determine the intensity of the energetics in terms of steam explosion. The study is based on numerical analysis starting from smaller scale and going to the large scale FCI. Efforts are also taken to evaluate the uncertainties in estimating the steam explosion loads on the reactor scale.The fragmented core is expected to form a porous debris bed. A part of the present work also deals with experimental investigations on the coolability of prototypical debris bed. Initially, the phenomenology of FCI and debris bed coolability is introduced. A review of the state of the art based on previous experimental and theoretical developments is also presented.The study starts with numerical investigation of molten droplet hydrodynamics in a water pool, carried out using the Volume Of Fluid (VOF) method in the CFD code ANSYS FLUENT. This fundamental study is related to single droplets in a preconditioning phase, i.e. deformation/pre-fragmentation prior to steam explosion. The droplet deformation is studied extensively also including the effect of the pressure pulse on its deformation behavior. The effect of material physical properties such as density, surface tension and viscosity are investigated. The work is then extended to 3D analysis as a part of high fidelity simulations, in order to overcome the possible limitations of 2D simulations.The investigation on FCI processes is then continued to the analysis on melt jet fragmentation in a water pool, since this is the crucial phenomenon which creates the melt-coolant pre-mixture, an initial condition for steam explosion. The calculations are carried out assuming non-boiling conditions and the properties of Wood’s metal. The jet fragmentation and breakup pattern are carefully observed at various Weber numbers. Moreover, the effect of physical and material properties such as diameter, velocity, density, surface tension and viscosity on jet breakup length, are investigated.After the fundamental studies, the work was extended to reactor scale FCI energetics. It is mainly oriented on the evaluation of uncertainties in estimating the explosion impact loads on the surrounding structures. The uncertainties include the influential parameters in the FCI process and also the code uncertainties in calculations. The FCI code MC3D is used for the simulations and the PIE (propagation of input errors) method is used for the uncertainty analysis.The last part of the work is about experimental investigations of debris coolability carried out using the POMECO-HT facility at KTH. The focus is on the determination of the effect of the bed’s prototypical characteristics on its coolability, in terms of inhomogeneity with heap like (triangular shape) bed and the radial stratified bed, and also the effect of its multi-dimensionality. For this purpose, four particle beds were constructed: two homogeneous, one with radial stratification and one with triangular shape, respectively. The effectiveness of coolability-enhanced measures such as bottom injection of water and a downcomer (used for natural circulation driven coolability, NCDC) was also investigated. The final chapter includes the summary of the whole work.