Heterogeneity of bone lamellar-level elastic moduli.

Advances in our ability to assess fracture risk, predict implant success, and evaluate new therapies for bone metabolic and remodeling disorders depend on our understanding of anatomically specific measures of local tissue mechanical properties near and surrounding bone cells. Using nanoindentation, we have quantified elastic modulus and hardness of human lamellar bone tissue as a function of tissue microstructures and anatomic location. Cortical and trabecular bone specimens were obtained from the femoral neck and diaphysis, distal radius, and fifth lumbar vertebra of ten male subjects (aged 40-85 years). Tissue was tested under moist conditions at room temperature to a maximum depth of 500 nm with a loading rate of 10 nm/sec. Diaphyseal tissue was found to have greater elastic modulus and hardness than metaphyseal tissues for all microstructures, whereas interstitial elastic modulus and hardness did not differ significantly between metaphyses. Trabecular bone varied across locations, with the femoral neck having greater lamellar-level elastic modulus and hardness than the distal radius, which had greater properties than the fifth lumbar vertebra. Osteonal, interstitial, and primary lamellar tissues of compact bone had greater elastic moduli and hardnesses than trabecular bone when comparing within an anatomic location. Only femoral neck interstitial tissue had a greater elastic modulus than its osteonal counterpart, which suggests that microstructural distinctions can vary with anatomical location and may reflect differences in the average tissue age of cortical bone or mineral and collagen organization.

[1]  John P. Bilezikian,et al.  Principles of Bone Biology , 1996 .

[2]  S. Cummings,et al.  Epidemiology and predictors of fractures associated with osteoporosis. , 1997, The American journal of medicine.

[3]  J. Currey,et al.  Hardness, Young's modulus and yield stress in mammalian mineralized tissues , 1990 .

[4]  A. Burstein,et al.  Review article. The mechanical properties of cortical bone. , 1974, The Journal of bone and joint surgery. American volume.

[5]  A. Burstein,et al.  The Mechanical Properties of Cortical Bone , 1974 .

[6]  I. N. Sneddon The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile , 1965 .

[7]  Yuan Sheng Cheng,et al.  Intrinsic mechanical competence of cortical and trabecular bone measured by nanoindentation and microindentation probes , 1995 .

[8]  S. Goldstein The mechanical properties of trabecular bone: dependence on anatomic location and function. , 1987, Journal of biomechanics.

[9]  S. Goldstein,et al.  Elastic modulus and hardness of cortical and trabecular bone lamellae measured by nanoindentation in the human femur. , 1999, Journal of biomechanics.

[10]  J. Chalmers Distribution of osteoporotic changes in the ageing skeleton. , 1973, Clinics in Endocrinology and Metabolism.

[11]  D Resnick,et al.  Entheses and enthesopathy. Anatomical, pathological, and radiological correlation. , 1983, Radiology.

[12]  R. B. Ashman,et al.  Anatomical variation of human cancellous bone mechanical properties in vitro. , 1997, Studies in health technology and informatics.

[13]  J. K. Gong,et al.  Composition of trabecular and cortical bone , 1964, The Anatomical record.

[14]  D. Carlstrom Micro-hardness measurements on single haversian systems in bone. , 1954, Experientia.

[15]  S. Goldstein,et al.  Evaluation of orthogonal mechanical properties and density of human trabecular bone from the major metaphyseal regions with materials testing and computed tomography , 1991, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[16]  S. Baker,et al.  The Analysis of Depth-Sensing Indentation Data: Review of the Special Discussion Session , 1993 .

[17]  A. Ascenzi,et al.  The bending properties of single osteons. , 1990, Journal of biomechanics.

[18]  L. S. Matthews,et al.  Comparison of the trabecular and cortical tissue moduli from human iliac crests , 1989, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[19]  J. Compston,et al.  Principles of Bone Biology , 1997 .

[20]  K. Mann,et al.  Heterogeneity of human bone , 1990, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[21]  J. Currey,et al.  Microhardness and Young's modulus in cortical bone exhibiting a wide range of mineral volume fractions, and in a bone analogue , 1990 .

[22]  M. Hahn,et al.  Heterogeneity of the skeleton: Comparison of the trabecular microarchitecture of the spine, the iliac crest, the femur, and the calcaneus , 1996, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[23]  G. Pharr,et al.  Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation. , 1997, Biomaterials.

[24]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[25]  J. Lewis,et al.  Experimental method for the measurement of the elastic modulus of trabecular bone tissue , 1989, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[26]  M. Kakihana,et al.  Materials Research Society Symposium - Proceedings , 2000 .

[27]  L. S. Matthews,et al.  The mechanical properties of human tibial trabecular bone as a function of metaphyseal location. , 1983, Journal of biomechanics.

[28]  A. Boyde,et al.  Distribution of lamellae in human femoral shafts deformed by bending with inferences on mechanical properties. , 1987, Bone.

[29]  D T Davy,et al.  Some viscoplastic characteristics of bovine and human cortical bone. , 1988, Journal of biomechanics.

[30]  A. Meunier,et al.  Scanning acoustic microscope studies of the elastic properties of osteons and osteon lamellae. , 1993, Journal of biomechanical engineering.

[31]  B. Clarke,et al.  Distribution of noncollagenous proteins in the matrix of adult human bone: Evidence of anatomic and functional heterogeneity , 1993, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[32]  S A Goldstein,et al.  A comparison of the fatigue behavior of human trabecular and cortical bone tissue. , 1992, Journal of biomechanics.

[33]  F. G. Evans,et al.  Mechanical properties and histology of cortical bone from younger and older men , 1976, The Anatomical Record.

[34]  J. Pugh,et al.  The micro-mechanics of cancellous bone. II. Determination of the elastic modulus of individual trabeculae by a buckling analysis. , 1975, Bulletin of the Hospital for Joint Diseases.

[35]  William D. Nix,et al.  A method for interpreting the data from depth-sensing indentation instruments , 1986 .

[36]  J. Currey,et al.  Hardness, an indicator of the mechanical competence of cancellous bone , 1989, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[37]  T. Brown,et al.  Mechanical property distributions in the cancellous bone of the human proximal femur. , 1980, Acta orthopaedica Scandinavica.

[38]  A. Ascenzi,et al.  The compressive properties of single osteons , 1968, The Anatomical record.

[39]  D. Burr,et al.  Bone Microdamage and Skeletal Fragility in Osteoporotic and Stress Fractures , 1997, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[40]  R. King,et al.  Elastic analysis of some punch problems for a layered medium , 1987 .

[41]  J. Dequeker,et al.  Biochemical anatomy of human bone: comparative study of compact and spongy bone in femur, rib and iliac crest. , 1987, Acta anatomica.

[42]  J. K. Weaver The microscopic hardness of bone. , 1966, The Journal of bone and joint surgery. American volume.

[43]  S. Weiner,et al.  Microstructure-microhardness relations in parallel-fibered and lamellar bone. , 1996, Bone.

[44]  A. Ascenzi,et al.  The shearing properties of single osteons , 1972, The Anatomical record.

[45]  S. Goldstein,et al.  The elastic moduli of human subchondral, trabecular, and cortical bone tissue and the size-dependency of cortical bone modulus. , 1990, Journal of biomechanics.

[46]  F. G. Evans,et al.  Differences and relationships between the physical properties and the microscopic structure of human femoral, tibial and fibular cortical bone , 1967 .

[47]  J O Outwater,et al.  Mechanical properties of bone as a function of position and orientation. , 1974, Journal of biomechanics.

[48]  P. Robey Bone Matrix Proteoglycans and Glycoproteins , 2002 .

[49]  R. Rose,et al.  Buckling studies of single human trabeculae. , 1975, Journal of biomechanics.

[50]  W. Hayes,et al.  A 20-year perspective on the mechanical properties of trabecular bone. , 1993, Journal of biomechanical engineering.

[51]  G. Pharr,et al.  The elastic properties of trabecular and cortical bone tissues are similar: results from two microscopic measurement techniques. , 1999, Journal of biomechanics.

[52]  J. L. Williams,et al.  Tensile testing of rodlike trabeculae excised from bovine femoral bone. , 1989, Journal of biomechanics.

[53]  A. Ascenzi,et al.  The tensile properties of single osteons , 1967, The Anatomical record.

[54]  R. B. Ashman,et al.  Elastic modulus of trabecular bone material. , 1988, Journal of biomechanics.

[55]  S J Hollister,et al.  A global relationship between trabecular bone morphology and homogenized elastic properties. , 1998, Journal of biomechanical engineering.

[56]  S. Goldstein,et al.  Evaluation of bone microstructural properties: effect of testing conditions, depth, repetition, time delay and displacement rate , 1997 .

[57]  R. Amprino Investigations on some physical properties of bone tissue. , 1958, Acta anatomica.

[58]  R. B. Ashman,et al.  Young's modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements. , 1993, Journal of biomechanics.

[59]  A Ascenzi,et al.  The tensile properties of single osteonic lamellae: technical problems and preliminary results. , 1982, Journal of biomechanics.