Design and field-weakening performance of a synchronous reluctance motor with axially-laminated rotor

Axially-laminated reluctance motors can be designed to have high saliency and so offer very good performance in terms of torque capacity, power factor and efficiency. The paper presents the design and performance of a 7.5 kW 4-pole machine, using thin rotor laminations, which achieved an unsaturated saliency ratio of 12.5. Finite element analysis is used to predict machine parameters, paying special attention to modelling of the thin rotor elements and to saturation effect on the d-axis. Computed parameters are compared with test measurements, showing good agreement. Load tests with 50 Hz supply confirm the expected performance characteristics but also show the occurrence of additional losses associated with the axially-laminated rotor construction. A design modification to reduce the extra losses is demonstrated. A detailed investigation of field-weakening performance is reported, showing constant-power characteristics and good agreement between predicted and measured performance over a speed range of 2.25:1 above base speed.

[1]  T.J.E. Miller,et al.  Field-weakening performance of brushless synchronous AC motor drives , 1994 .

[2]  Syed Nasar,et al.  Emerging Electric Machines with Axially Laminated Anisotropic Rotors: A Review , 1991 .

[3]  S. Morimoto,et al.  Expansion of operating limits for permanent magnet motor by current vector control considering inverter capacity , 1990 .

[4]  Timothy J. E. Miller,et al.  Maximising the saliency ratio of the synchronous reluctance motor , 1993 .

[5]  R. W. Menzies,et al.  Axially laminated anisotropic rotors for reluctance motors , 1966 .

[6]  C. Cossar,et al.  Design of a synchronous reluctance motor drive , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[7]  Z. X. Fu,et al.  Performance evaluation of axially-laminated anisotropic (ALA) rotor reluctance synchronous motors , 1992, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting.

[8]  Thomas A. Lipo,et al.  Rotor design optimization of synchronous reluctance machine , 1994 .

[9]  Brian J. Chalmers,et al.  Variable-frequency synchronous motor drives for electric vehicles , 1995 .

[10]  T.A. Lipo,et al.  Power capability of salient pole permanent magnet synchronous motors in variable speed drive applications , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[11]  D. Platt.  Reluctance motor with strong rotor anisotropy , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[12]  Thomas A. Lipo,et al.  Synchronous reluctance machines―a viable alternative for AC drives? , 1991 .

[13]  T.J.E. Miller,et al.  Design of a new axially-laminated interior permanent magnet motor , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.