A comprehensive review of novel cooling techniques and heat transfer coolant mediums investigated for battery thermal management systems in electric vehicles

[1]  H. Aybar,et al.  Numerical study of lozenge, triangular and rectangular arrangements of lithium-ion batteries in their thermal management in a cooled-air cooling system , 2022, Journal of Energy Storage.

[2]  Zhiwei He,et al.  Design and optimization of a novel reverse layered air‐cooling battery management system using U and Z type flow patterns , 2022, International Journal of Energy Research.

[3]  Hussein M. Maghrabie,et al.  Battery thermal management systems based on nanofluids for electric vehicles , 2022, Journal of Energy Storage.

[4]  Xishi Wang,et al.  Investigation on fine water mist battery thermal management system for thermal runaway control , 2022, Applied Thermal Engineering.

[5]  Xiangwei Lin,et al.  Recent Developments of Thermal Management Strategies for Lithium‐ion Batteries: A State‐of‐the‐Art Review , 2022, Energy Technology.

[6]  Changhong Wang,et al.  Research on spray cooling performance based on battery thermal management , 2022, International Journal of Energy Research.

[7]  J. Luo,et al.  Battery thermal management systems (BTMs) based on phase change material (PCM): A comprehensive review , 2022, Chemical Engineering Journal.

[8]  Md Sazzad Hosen,et al.  Novel design optimization for passive cooling PCM assisted battery thermal management system in electric vehicles , 2022, Case Studies in Thermal Engineering.

[9]  Md Sazzad Hosen,et al.  Thermal Performance Improvement for Different Strategies of Battery Thermal Management Systems Combined with Jute—A Comparison Study , 2022, Energies.

[10]  Xiongchao Lin.  Optimization and Numerical Simulation of Novel Air-cooling System for the Thermal Management of Lithium-ion Battery Pack , 2022, International Journal of Electrochemical Science.

[11]  T. Zhao,et al.  Novel battery thermal management system with different shapes of pin fins , 2021, International Journal of Energy Research.

[12]  Alireza Mahdavi Nejad,et al.  Novel hybrid thermal management for Li-ion batteries with nanofluid cooling in the presence of alternating magnetic field: An experimental study , 2021, Case Studies in Thermal Engineering.

[13]  Md Sazzad Hosen,et al.  Experimental and Numerical Study on the Thermal Behavior of a Large Lithium-Ion Prismatic Cell With Natural Air Convection , 2021, IEEE Transactions on Industry Applications.

[14]  Md Sazzad Hosen,et al.  Novel and Environmental Friendly Design Optimization for Battery Thermal Management System , 2021, International Conference on Smart Grid and Clean Energy Technologies.

[15]  Qingsong Wang,et al.  Experimental study of the cooling effect of water mist on 18650 lithium-ion battery at different initial temperatures , 2021, Process Safety and Environmental Protection.

[16]  Shahnawaz Ahmed,et al.  Loop Heat Pipe Design: An Evaluation of Recent Research on the Selection of Evaporator, Wick and Working Fluid , 2021, Journal of Thermal Science and Engineering Apllications.

[17]  Jian Qu,et al.  Performance evaluation of hybrid oscillating heat pipe with carbon nanotube nanofluids for electric vehicle battery cooling , 2021 .

[18]  M. Najafi,et al.  Numerical study of novel liquid-cooled thermal management system for cylindrical Li-ion battery packs under high discharge rate based on AgO nanofluid and copper sheath , 2021 .

[19]  M. Berecibar,et al.  Battery cycle life study through relaxation and forecasting the lifetime via machine learning , 2021 .

[20]  Michael Negnevitsky,et al.  A review of air-cooling battery thermal management systems for electric and hybrid electric vehicles , 2021, Journal of Power Sources.

[21]  M. Marengo,et al.  Novel battery thermal management system for electric vehicles with a loop heat pipe and graphite sheet inserts , 2021, Applied Thermal Engineering.

[22]  M. Berecibar,et al.  Comprehensive Passive Thermal Management Systems for Electric Vehicles , 2021, Energies.

[23]  Lysander De Sutter,et al.  Effect analysis on performance enhancement of a novel and environmental evaporative cooling system for lithium-ion battery applications , 2021 .

[24]  T. Karakoc,et al.  Computational modeling of a lithium‐ion battery thermal management system with Al2O3‐based nanofluids , 2021, International Journal of Energy Research.

[25]  Haitao Min,et al.  Performance investigation of a passive battery thermal management system applied with phase change material , 2021 .

[26]  Guoqing Zhang,et al.  Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials , 2021, Applied Thermal Engineering.

[27]  Omer Kalaf,et al.  Experimental and simulation study of liquid coolant battery thermal management system for electric vehicles: A review , 2020, International Journal of Energy Research.

[28]  S. M. Yahya,et al.  Critical review on battery thermal management and role of nanomaterial in heat transfer enhancement for electrical vehicle application , 2020 .

[29]  Zhonghao Rao,et al.  Interfacial thermal conductance across hexagonal boron nitride & paraffin based thermal energy storage materials , 2020 .

[30]  Guoqing Zhang,et al.  Experimental investigation on thermally induced aluminum nitride based flexible composite phase change material for battery thermal management , 2020 .

[31]  Meng Chen,et al.  Nanofluid-based pulsating heat pipe for thermal management of lithium-ion batteries for electric vehicles , 2020 .

[32]  M. Jabbal,et al.  Thermophysical characteristics and application of metallic-oxide based mono and hybrid nanocomposite phase change materials for thermal management systems , 2020, Applied Thermal Engineering.

[33]  Qingfeng Li,et al.  Performance investigation of a battery thermal management system with microencapsulated phase change material suspension , 2020 .

[34]  Ji-zhen Liu,et al.  An innovative battery thermal management with thermally induced flexible phase change material , 2020 .

[35]  Joeri Van Mierlo,et al.  A comprehensive review of future thermal management systems for battery-electrified vehicles , 2020 .

[36]  Zhengguo Zhang,et al.  Experimental and simulative investigations on a phase change material nano-emulsion-based liquid cooling thermal management system for a lithium-ion battery pack , 2020 .

[37]  M. Berecibar,et al.  A new concept of thermal management system in Li-ion battery using air cooling and heat pipe for electric vehicles , 2020 .

[38]  M. Agelin-Chaab,et al.  Experimental Study of a Thermal Cooling Technique for Cylindrical Batteries , 2020, Journal of Electrochemical Energy Conversion and Storage.

[39]  Xi Chen,et al.  Study of using enhanced heat-transfer flexible phase change material film in thermal management of compact electronic device , 2020 .

[40]  F. Ma,et al.  Experimental study of a direct evaporative cooling approach for Li‐ion battery thermal management , 2020, International Journal of Energy Research.

[41]  P. Naphon,et al.  Thermal management system with nanofluids for electric vehicle battery cooling modules , 2020 .

[42]  M. Siavashi,et al.  Battery thermal management with thermal energy storage composites of PCM, metal foam, fin and nanoparticle , 2020 .

[43]  Xiaoming Xu,et al.  Heat dissipation analysis of different flow path for parallel liquid cooling battery thermal management system , 2020, International Journal of Energy Research.

[44]  Yong-lin Shi,et al.  A lithium-ion battery-thermal-management design based on phase-change-material thermal storage and spray cooling , 2020 .

[45]  Guoqing Zhang,et al.  Evaluation of lithium battery thermal management using sealant made of boron nitride and silicone , 2020, Journal of Power Sources.

[46]  Liqing Qian.  A thermal‐structure coupled optimization study of lithium‐ion battery modules with mist cooling , 2020, International Journal of Energy Research.

[47]  Jonghoon Kim,et al.  Internal thermal network model-based inner temperature distribution of high-power lithium-ion battery packs with different shapes for thermal management , 2020 .

[48]  J. Tanimoto,et al.  A simplified numerical model for evaporative cooling by water spray over roof surfaces , 2020 .

[49]  Xiu-xing Yin,et al.  A novel heat pipe assisted separation type battery thermal management system based on phase change material , 2020 .

[50]  Xiaoze Du,et al.  Pre-cooling of air by water spray evaporation to improve thermal performance of lithium battery pack , 2019 .

[51]  Kexiang Wei,et al.  Effects of different phase change material thermal management strategies on the cooling performance of the power lithium ion batteries: A review , 2019 .

[52]  G. Ulpiani.  Water mist spray for outdoor cooling: A systematic review of technologies, methods and impacts , 2019, Applied Energy.

[53]  Jie Zhang,et al.  Design a J-type air-based battery thermal management system through surrogate-based optimization , 2019, Applied Energy.

[54]  M. Agelin-Chaab,et al.  Development and experimental analysis of a hybrid cooling concept for electric vehicle battery packs , 2019, Journal of Energy Storage.

[55]  Wangyu Liu,et al.  The thermal performance of a novel internal cooling method for the electric vehicle battery: An experimental study , 2019, Applied Thermal Engineering.

[56]  Haiyan Wu,et al.  Flexible phase change composite materials with simultaneous light energy storage and light-actuated shape memory capability , 2019, Composites Science and Technology.

[57]  Mehdi Ashjaee,et al.  A novel hybrid thermal management for Li-ion batteries using phase change materials embedded in copper foams combined with forced-air convection , 2019, International Journal of Thermal Sciences.

[58]  Jian Qu,et al.  Heat transfer characteristics of plug-in oscillating heat pipe with binary-fluid mixtures for electric vehicle battery thermal management , 2019, International Journal of Heat and Mass Transfer.

[59]  Ke-Jun Xu,et al.  Study of Thermal Management System Using Composite Phase Change Materials and Thermoelectric Cooling Sheet for Power Battery Pack , 2019, Energies.

[60]  Zhiguo Qu,et al.  Lithium–ion battery thermal management using heat pipe and phase change material during discharge–charge cycle: A comprehensive numerical study , 2019, Applied Energy.

[61]  Mengxuan Song,et al.  Design of the structure of battery pack in parallel air-cooled battery thermal management system for cooling efficiency improvement , 2019, International Journal of Heat and Mass Transfer.

[62]  W. Yuan,et al.  Thermal management for a tube–shell Li-ion battery pack using water evaporation coupled with forced air cooling , 2019, RSC advances.

[63]  J. Niu,et al.  Development and characterization of novel and stable silicon nanoparticles-embedded PCM-in-water emulsions for thermal energy storage , 2019, Applied Energy.

[64]  Hoseong Lee,et al.  Review on battery thermal management system for electric vehicles , 2019, Applied Thermal Engineering.

[65]  W. Cheng,et al.  Thermal management of Li-ion battery pack with the application of flexible form-stable composite phase change materials , 2019, Energy Conversion and Management.

[66]  Shuangfeng Wang,et al.  Form-stable and thermally induced flexible composite phase change material for thermal energy storage and thermal management applications , 2019, Applied Energy.

[67]  Weixiong Wu,et al.  A critical review of battery thermal performance and liquid based battery thermal management , 2019, Energy Conversion and Management.

[68]  Akhil Garg,et al.  A surrogate thermal modeling and parametric optimization of battery pack with air cooling for EVs , 2019, Applied Thermal Engineering.

[69]  M. Shojaeefard,et al.  Improving the performance of a passive battery thermal management system based on PCM using lateral fins , 2019, Heat and Mass Transfer.

[70]  Weixiong Wu,et al.  Cooling efficiency improvement of air-cooled battery thermal management system through designing the flow pattern , 2019, Energy.

[71]  H. Ali,et al.  Copper foam/PCMs based heat sinks: An experimental study for electronic cooling systems , 2018, International Journal of Heat and Mass Transfer.

[72]  F. Zhang,et al.  Effects of the different air cooling strategies on cooling performance of a lithium-ion battery module with baffle , 2018, Applied Thermal Engineering.

[73]  Bill J. Van Heyst,et al.  A comprehensive review on a passive (phase change materials) and an active (thermoelectric cooler) battery thermal management system and their limitations , 2018, Journal of Power Sources.

[74]  Shashank Arora,et al.  Selection of thermal management system for modular battery packs of electric vehicles: A review of existing and emerging technologies , 2018, Journal of Power Sources.

[75]  E Jiaqiang,et al.  Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: A review , 2018, Applied Thermal Engineering.

[76]  Guoqing Zhang,et al.  Experimental investigation of the thermal performance of heat pipe assisted phase change material for battery thermal management system , 2018, Applied Thermal Engineering.

[77]  L. Saw,et al.  Novel thermal management system using mist cooling for lithium-ion battery packs , 2018, Applied Energy.

[78]  Huifang Kang,et al.  The impact of enclosure and boundary conditions with a wedge‐shaped path and air cooling for battery thermal management in electric vehicles , 2018, International Journal of Energy Research.

[79]  Martin Agelin-Chaab,et al.  Novel Hybrid Cooling Concept for Battery Thermal Management Design , 2018, Proceedings of the 5th International Conference of Fluid Flow, Heat and Mass Transfer (FFHMT'18).

[80]  Martin Agelin-Chaab,et al.  Experimental investigation of a novel hybrid cooling method for lithium-ion batteries , 2018 .

[81]  Omar Abdelaziz,et al.  Thermal charging performance of enhanced phase change material composites for thermal battery design , 2018 .

[82]  Shuo Zhou,et al.  Experimental investigation of thermal and strain management for lithium-ion battery pack in heat pipe cooling , 2018 .

[83]  Guoqing Zhang,et al.  Experimental examination of large capacity liFePO4 battery pack at high temperature and rapid discharge using novel liquid cooling strategy , 2018 .

[84]  Joeri Van Mierlo,et al.  Phase-change materials (PCM) for automotive applications: A review , 2018 .

[85]  Pascal Henry Biwole,et al.  Electric vehicles batteries thermal management systems employing phase change materials , 2018 .

[86]  Mengxuan Song,et al.  Structure optimization of parallel air-cooled battery thermal management system with U-type flow for cooling efficiency improvement , 2018 .

[87]  Ibrahim Dincer,et al.  Thermal and electrical performance evaluations of series connected Li-ion batteries in a pack with liquid cooling , 2018 .

[88]  Jean-François Fourmigué,et al.  An innovative practical battery thermal management system based on phase change materials: Numerical and experimental investigations , 2018 .

[89]  M. Ghanbarpour,et al.  Investigation of PCM-assisted heat pipe for electronic cooling , 2017 .

[90]  Guoqing Zhang,et al.  A thermal management system for rectangular LiFePO4 battery module using novel double copper mesh-enhanced phase change material plates , 2017 .

[91]  M. Fowler,et al.  Experimental Investigation of a New Passive Thermal Management System for a Li-Ion Battery Pack Using Phase Change Composite Material , 2017 .

[92]  M. Pan,et al.  Cutting copper fiber/paraffin composite phase change material discharging experimental study based on heat dissipation capability of Li-ion battery , 2017 .

[93]  Ziping Feng,et al.  Thermal management performances of PCM/water cooling-plate using for lithium-ion battery module based on non-uniform internal heat source , 2017 .

[94]  Lei Cao,et al.  A review on battery thermal management in electric vehicle application , 2017 .

[95]  Jiyun Zhao,et al.  Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: A review , 2017 .

[96]  Ibrahim Dincer,et al.  Novel thermal management system using boiling cooling for high-powered lithium-ion battery packs for hybrid electric vehicles , 2017 .

[97]  Rui Zhao,et al.  Optimization of a phase change material based internal cooling system for cylindrical Li-ion battery pack and a hybrid cooling design , 2017 .

[98]  Yonghuan Ren,et al.  Thermal management of a Li-ion battery pack employing water evaporation , 2017 .

[99]  Søren Knudsen Kær,et al.  Towards an Ultimate Battery Thermal Management System: A Review , 2017 .

[100]  Weixiong Wu,et al.  An experimental study of thermal management system using copper mesh-enhanced composite phase change materials for power battery pack , 2016 .

[101]  Yuying Yan,et al.  A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles , 2016 .

[102]  Farah Souayfane,et al.  Phase change materials (PCM) for cooling applications in buildings: A review , 2016 .

[103]  Wen Tong Chong,et al.  Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling , 2016 .

[104]  Rangga Aji Pamungkas,et al.  Experimental investigation on performance of lithium-ion battery thermal management system using flat plate loop heat pipe for electric vehicle application , 2016 .

[105]  M. Fowler,et al.  Thermal modeling and validation of temperature distributions in a prismatic lithium-ion battery at different discharge rates and varying boundary conditions , 2016 .

[106]  Tian-Ling Ren,et al.  A review of small heat pipes for electronics , 2016 .

[107]  Zhonghao Rao,et al.  Investigation of the thermal performance of phase change material/mini-channel coupled battery thermal management system , 2016 .

[108]  Jiuchun Jiang,et al.  Comparison of different cooling methods for lithium ion battery cells , 2016 .

[109]  Khashayar Khoshmanesh,et al.  An Integrated Liquid Cooling System Based on Galinstan Liquid Metal Droplets. , 2016, ACS applied materials & interfaces.

[110]  Tao Wang,et al.  Development of efficient air-cooling strategies for lithium-ion battery module based on empirical heat source model , 2015 .

[111]  Ataur Rahman,et al.  Fuzzy controlled evaporative battery thermal management system for EV/HEV , 2015 .

[112]  Xiongwen Zhang,et al.  Assessment of the forced air-cooling performance for cylindrical lithium-ion battery packs: A comparative analysis between aligned and staggered cell arrangements , 2015 .

[113]  Junjie Gu,et al.  An experimental study of lithium ion battery thermal management using flexible hydrogel films , 2014 .

[114]  M.N.A. Hawlader,et al.  Noble Evaporative Battery Thermal Management System for EVs/HEVs , 2014 .

[115]  Kamaruzzaman Sopian,et al.  Enhance heat transfer for PCM melting in triplex tube with internal-external fins , 2013 .

[116]  Ala Hasan,et al.  Indirect evaporative cooling : Past, present and future potentials , 2012 .

[117]  X. Huai,et al.  Numerical characterization of multi-nozzle spray cooling , 2012 .

[118]  Jing Liu,et al.  Self-Driven Electronic Cooling Based on Thermosyphon Effect of Room Temperature Liquid Metal , 2011 .

[119]  T. Fuller,et al.  A Critical Review of Thermal Issues in Lithium-Ion Batteries , 2011 .

[120]  Jorge E. Gonzalez,et al.  Analysis and Design of a Paraffin/Graphite Composite PCM Integrated in a Thermal Storage Unit , 2010 .

[121]  Suresh V. Garimella,et al.  Analysis of evaporating mist flow for enhanced convective heat transfer , 2010 .

[122]  J. Selman,et al.  Active (air-cooled) vs. passive (phase change material) thermal management of high power lithium-ion packs: Limitation of temperature rise and uniformity of temperature distribution , 2008 .

[123]  Chi-Chuan Wang,et al.  Enhancement of thermal conductivity with Cu for nanofluids using chemical reduction method , 2006 .

[124]  Andrew Mills,et al.  Simulation of passive thermal management system for lithium-ion battery packs , 2005 .

[125]  Ralph E. White,et al.  Capacity fade of Sony 18650 cells cycled at elevated temperatures. Part II. Capacity fade analysis , 2002 .

[126]  Paul A. Nelson,et al.  Modeling thermal management of lithium-ion PNGV batteries , 2002 .

[127]  Ahmad Pesaran,et al.  Battery thermal models for hybrid vehicle simulations , 2002 .

[128]  M. Zolot,et al.  Battery usage and thermal performance of the Toyota Prius and Honda Insight during chassis dynamometer testing , 2002, Seventeenth Annual Battery Conference on Applications and Advances. Proceedings of Conference (Cat. No.02TH8576).

[129]  Hussein M. Maghrabie,et al.  Thermal management systems based on heat pipes for batteries in EVs/HEVs , 2022, Journal of Energy Storage.

[130]  Yong Li,et al.  Investigation on the thermal performance of a battery thermal management system using heat pipe under different ambient temperatures , 2018 .

[131]  Lip Huat Saw,et al.  Performance assessment and optimization of a heat pipe thermal management system for fast charging lithium ion battery packs , 2016 .

[132]  Rui Zhao,et al.  An experimental study of heat pipe thermal management system with wet cooling method for lithium ion batteries , 2015 .

[133]  Olivier C.L. Haas,et al.  Fan-pad evaporative battery cooling for hybrid electric vehicle thermal management , 2015 .

[134]  H. Montazeri,et al.  Evaporative cooling by water spray systems: CFD simulation, experimental validation and sensitivity analysis , 2015 .