The direct simulation Monte Carlo (DSMC) is performed for two-dimensional gaseous flow through a microchannel in both slip and transition regimes to understand the effects of compressibility and rarefaction. Results are presented in the form of axial pressure distribution, velocity profile, local friction coefficient, and local Mach number (Ma) and are compared with the available analytical and experimental results. The effect of compressibility is examined for the inlet to outlet pressure ratios ranging from 1.38 to 4.5. Low-pressure drop simulations with Knudsen numbers (Kn) ranging from 0.03 to 0.11 are performed to identify the effect of rarefaction. It was found that compressibility makes the axial pressure variation nonlinear and enhances the local friction coefficient. On the other hand, rarefaction does not affect pressure distribution but causes the flow to slip at the wall and reduces the local friction coefficient. In addition, it was found that the locally fully developed (LFD) assumption is valid for low Ma flows by comparison with DSMC results.
[1]
H. Berg,et al.
Compressible laminar flow in a capillary
,
1993,
Journal of Fluid Mechanics.
[2]
Elaine S. Oran,et al.
Parallelization of direct simulation Monte Carlo method combined with monotonic Lagrangian grid
,
1996
.
[3]
George Em Karniadakis,et al.
Rarefaction and Compressibility Effects in Gas Microflows
,
1996
.
[4]
E. Oran,et al.
Computations of High-Speed, High Knudsen Number Microchannel Flows
,
1997
.
[5]
C. Mavriplis,et al.
Heat transfer and flowfields in short microchannels using Direct Simulation Monte Carlo
,
1997
.
[6]
Heat and momentum transport in micro-channels
,
1998
.
[7]
Local Pressure Measurement of Gaseous Flow Through Microchannels
,
1999,
Heat Transfer: Volume 3.
[8]
Aaas News,et al.
Book Reviews
,
1893,
Buffalo Medical and Surgical Journal.