Entropy generation analysis for fully developed laminar convection in hexagonal duct subjected to constant heat flux

The entropy generation of a fully developed laminar flow in a hexagonal duct is investigated in this study. A constant heat flux condition was applied in this analysis. Two fluids, water and engine oil, were used to study the effect of fluid properties on the entropy generation. The fluid properties were evaluated using average temperature between inlet and outlet duct sections. The aspect ratio of the hexagonal duct was varied to show its effect on the entropy generation. Attention was also given to the supplied heat flux affecting the entropy generation. Finally, the entropy generation calculated from the hexagonal duct was compared with that from rectangular and circular ducts having the same hydraulic diameter and cross-sectional area.

[1]  A. Bejan.  A Study of Entropy Generation in Fundamental Convective Heat Transfer , 1979 .

[2]  A. Bejan.  Entropy generation minimization: The new thermodynamics of finite-size devices and finite-time processes , 1996 .

[3]  A. Sahin,et al.  Thermodynamics of laminar viscous flow through a duct subjected to constant heat flux , 1996 .

[4]  Ahmet Z. Sahin,et al.  Entropy generation and pumping power in a turbulent fluid flow through a smooth pipe subjected to constant heat flux , 2002 .

[5]  Rached Ben-Mansour,et al.  Entropy generation in developing laminar fluid flow through a circular pipe with variable properties , 2005 .

[6]  K. Ting,et al.  Optimal Reynolds number for the fully developed laminar forced convection in a helical coiled tube , 2006 .

[7]  R. M. Manglik,et al.  Fully developed forced convection through trapezoidal and hexagonal ducts , 1999 .

[8]  J. P. Hartnett,et al.  Handbook of Heat Transfer Fundamentals (Second Edition) , 1986 .

[9]  Martin A. Reno,et al.  Coefficients for calculating thermodynamic and transport properties of individual species , 1993 .

[10]  A. Bejan,et al.  Entropy Generation Through Heat and Fluid Flow , 1983 .

[11]  Kuen Ting,et al.  Entropy generation and thermodynamic optimization of fully developed laminar convection in a helical coil , 2005 .

[12]  R. Reid,et al.  The Properties of Gases and Liquids , 1977 .

[13]  Ahmet Z. Sahin,et al.  Irreversibilities in various duct geometries with constant wall heat flux and laminar flow , 1998 .

[14]  W. Rohsenow,et al.  Handbook of Heat Transfer Fundamentals , 1985 .

[15]  A. K. Satapathy,et al.  Thermodynamic optimization of a coiled tube heat exchanger under constant wall heat flux condition , 2009 .

[16]  F. White.  Viscous Fluid Flow , 1974 .

[17]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[18]  David R. Maidment,et al.  Handbook of Hydrology , 1993 .

[19]  K. Ting,et al.  Entropy generation and optimal analysis for laminar forced convection in curved rectangular ducts : A numerical study , 2006 .