Increased power output from micro porous layer (MPL) cathode microbial fuel cells (MFC)

Abstract Microbial fuel cells are bio-electrochemical transducers that utilise microorganisms to generate electricity, through the oxidation of organic matter. They consist of a negative anode and a positive cathode, separated by an ion selective membrane. The key to improve power, in open-to-air cathode MFCs, is the efficient utilisation of oxygen, by using high surface area materials and effective gas diffusion. This study investigated the effect of single micro porous layers, used as the coating on various electrode substrata, on the performance of small-scale MFCs. Furthermore, 2 of the modified small-scale (6.25 mL) MFCs were implemented as the power source for the TI Chronos digital wristwatch, thus successfully substituting the 3 V button cell, at least for the duration of the experiment.

[1]  Bruce E Logan,et al.  Cathode performance as a factor in electricity generation in microbial fuel cells. , 2004, Environmental science & technology.

[2]  Ian Kelly,et al.  SlugBot: A Robot Predator , 2001, ECAL.

[3]  Chris Melhuish,et al.  EcoBot-III - A Robot with Guts , 2010, ALIFE.

[4]  C. Melhuish,et al.  Microbial fuel cells based on carbon veil electrodes: Stack configuration and scalability , 2008 .

[5]  Chris Melhuish,et al.  EcoBot-II: An Artificial Agent with a Natural Metabolism , 2005 .

[6]  W. Vogel,et al.  Electrochemical Aspects of Adhesive Joint Failure , 1978 .

[7]  Werner Lehnert,et al.  Diffusion media materials and characterisation , 2010 .

[8]  C. Santoro,et al.  Power generation from wastewater using single chamber microbial fuel cells (MFCs) with platinum-free cathodes and pre-colonized anodes , 2012 .

[9]  Bruce E Logan,et al.  Tubular membrane cathodes for scalable power generation in microbial fuel cells. , 2007, Environmental science & technology.

[10]  P. Stonehart,et al.  Rheological characterization and thermal degradation of PTFE , 1976 .

[11]  Baikun Li,et al.  Effects of gas diffusion layer (GDL) and micro porous layer (MPL) on cathode performance in microbia , 2011 .

[12]  P. Stonehart,et al.  The interaction between PTFE and porous metals and metal blacks — rheological characterization and thermal degradation of the polymer , 1976 .

[13]  G. Squadrito,et al.  Influence of the structure in low-Pt loading electrodes for polymer electrolyte fuel cells , 1998 .

[14]  C Melhuish,et al.  Improved energy output levels from small-scale Microbial Fuel Cells. , 2010, Bioelectrochemistry.

[15]  Jiujun Zhang,et al.  A review of water flooding issues in the proton exchange membrane fuel cell , 2008 .

[16]  M. C. Potter.  Electrical Effects Accompanying the Decomposition of Organic Compounds. II. Ionisation of the Gases Produced during Fermentation , 1911 .

[17]  Jurg Keller,et al.  Non-catalyzed cathodic oxygen reduction at graphite granules in microbial fuel cells , 2007 .