An effective method for separating casting components from the runner system using vibration-induced fatigue damage

[1]  E. Parloo,et al.  Force identification by means of in-operation modal models , 2002 .

[2]  Yinghong Peng,et al.  Numerical simulation of low pressure die casting of magnesium wheel , 2007 .

[3]  Paul W. Cleary,et al.  SIMULATION OF DIE FILLING IN GRAVITY DIE CASTING USING SPH AND MAGMAsoft , 1999 .

[4]  Prasenjit Mohanty,et al.  Operational modal analysis in the presence of harmonic excitation , 2004 .

[5]  Weng-Sing Hwang,et al.  Molten metal flow pattern prediction for complete solidification analysis of near net shape castings , 1988 .

[6]  Jean-Loup Chenot,et al.  Thermomechanics of the cooling stage in casting processes: Three-dimensional finite element analysis and experimental validation , 1996 .

[7]  The Growth of Short Cracks from Defects under Multi-Axial Loading , 2006 .

[8]  William V Mars.  COMPUTED DEPENDENCE OF RUBBER'S FATIGUE BEHAVIOR ON STRAIN CRYSTALLIZATION , 2009 .

[9]  P Homayonifar,et al.  Numerical modeling of splashing and air entrapment in high-pressure die casting , 2008 .

[10]  N. Green,et al.  Vibration-assisted filling capability in thin wall investment casting , 2012 .

[11]  Yinghong Peng,et al.  Computational modeling and control system of continuous casting process , 2007 .

[12]  Masahiro Endo,et al.  3630 - THE INFLUENCE OF BIAXIAL STRESS ON THE FATIGUE BEHAVIOR OF DEFECT-CONTAINING STEELS , 2013 .

[13]  David J. Browne,et al.  Use of experiment and an inverse method to study interface heat transfer during solidification in the investment casting process , 2000 .

[14]  Adrian S. Sabau,et al.  Alloy shrinkage factors for the investment casting process , 2006 .

[15]  J. Drezet,et al.  Modeling of ingot distortions during direct chill casting of aluminum alloys , 1996 .

[16]  Adrian S. Sabau,et al.  Material properties for predicting wax pattern dimensions in investment casting , 2003 .

[17]  Erik L.J. Bohez,et al.  Optimal gating system design for investment casting of sterling silver by computer-assisted simulation , 2013 .

[18]  K. Anzai,et al.  Solidification Velocity and Temperature Gradient in Infinitely Thick Alloy Castings , 1995 .

[19]  Himadri Chattopadhyay,et al.  Estimation of solidification time in investment casting process , 2011 .

[20]  John Goodman,et al.  Mechanics applied to engineering , 1904 .

[21]  Kim A. Stelson,et al.  Analysis of Flow Patterns and Solidification Phenomena in the Die Casting Process , 1991 .

[22]  C. Yuan,et al.  Advances in shell moulding for investment casting , 2003 .

[23]  Weng-Sing Hwang,et al.  Fluid Flow Modeling for Computer-Aided Design of Castings , 1983 .

[24]  Pradeep Kumar Jha,et al.  Developments in investment casting process—A review , 2012 .