A Hybrid Thermopneumatic and Electrostatic Microvalve with Integrated Position Sensing

This paper presents a low-power hybrid thermopneumatic microvalve with an electrostatic hold and integrated valve plate position sensing. This combination of actuators in a single structure enables a high throw and force actuator with low energy consumption, a combination that is difficult to otherwise achieve. The completed 7.5 mm × 10.3 mm × 1.5 mm valve has an open flow rate of 8 sccm at 600 Pa, a leak rate of 2.2 × 10 −3 sccm at 115 kPa, a open-to-closed fluidic conductance ratio of nearly one million, an actuation time of 430 ms at 250 mW, and a required power of 90 mW while closed. It additionally requires no power to open, and has a built-in capacitive position sensor with a sensitivity of 9.8 fF/kPa. The paper additionally presents analytical models of the valve components, design tradeoffs, and guidelines for achieving an optimized device.

[1]  K. Wise,et al.  An electrostatically latching thermopneumatic microvalve with closed-loop position sensing , 2005, 18th IEEE International Conference on Micro Electro Mechanical Systems, 2005. MEMS 2005..

[2]  K. Najafi,et al.  A detailed study of yield and reliability for vacuum packages fabricated in a wafer-level Au-Si eutectic bonding process , 2009, TRANSDUCERS 2009 - 2009 International Solid-State Sensors, Actuators and Microsystems Conference.

[3]  Choonsup Lee,et al.  Normally-closed, leak-tight piezoelectric microvalve under ultra-high upstream pressure for integrated micropropulsion , 2003, The Sixteenth Annual International Conference on Micro Electro Mechanical Systems, 2003. MEMS-03 Kyoto. IEEE.

[4]  Albert K. Henning,et al.  A thermopneumatically actuated microvalve for liquid expansion and proportional control , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[5]  Helmut Seidel,et al.  A silicon microvalve with combined electromagnetic/electrostatic actuation , 1993 .

[6]  Chong H. Ahn,et al.  Institute of Physics Publishing Journal of Micromechanics and Microengineering a Review of Microvalves , 2022 .

[7]  K. Wise,et al.  A nested electrostatically-actuated microvalve for an integrated microflow controller , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.

[8]  Chang Liu,et al.  Development of a Latchable Microvalve Employing a Low-Melting-Temperature Metal Alloy , 2008, Journal of Microelectromechanical Systems.

[9]  K.D. Wise,et al.  Scaling limits in batch-fabricated silicon pressure sensors , 1987, IEEE Transactions on Electron Devices.

[10]  R. Liu.  NONLINEAR ANALYSIS OF CORRUGATED ANNULAR PLATES UNDER COMPOUND LOAD , 1985 .

[11]  Micro flow devices , 1994, 1994 5th International Symposium on Micro Machine and Human Science Proceedings.

[12]  Hans Joachim Quenzer,et al.  Bistable microvalve with pneumatically coupled membranes , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[13]  M. Capanu,et al.  Design, fabrication, and testing of a bistable electromagnetically actuated microvalve , 2000, Journal of Microelectromechanical Systems.

[14]  A LOW-POWER, LOW-LEAKAGE, BI-STABLE PLANAR ELECTROLYSIS MICRO GATE VALVE , 2004 .

[15]  Kensall D. Wise,et al.  Thermally driven phase-change microactuation , 1995 .

[16]  Kensall D. Wise,et al.  A high-flow thermopneumatic microvalve with improved efficiency and integrated state sensing , 2003 .