论文信息 - Scaling considerations for circulating fluidized bed risers

Scaling considerations for circulating fluidized bed risers

Abstract The ratio between actual gas velocity to particle velocity in the hydrodynamically fully developed region of Circulating Fluidized Bed risers (CFB) may be approximated by ϕ=1+5.6/Fr+0.47Fr0.41t=Ug/ϵVp. This ratio, termed the slip factor, is about 2 at operating conditions characteristic of industrial risers several meters in diameter and agrees with observations of J. M. Matsen (in D. L. Keairns (ed.), Fluidization Technology, Vol. 2, Hemisphere, 1976, p. 135). The proposed relationship between the gas and solids velocity is an adequate first approximation to estimate gas and solids residence times, blower capacity and standpipe length.

[1] Nicolas Kalogerakis,et al. Modelling the internal flow structure of circulating fluidized beds , 1989 .

[2] H. Weinstein,et al. An evaluation of the actual density in the acceleration section of vertical risers , 1989 .

[3] Masayuki Horio,et al. The Clustering Annular Flow Model of Circulating Fluidized Beds , 1989 .

[4] Giorgio Rovero,et al. Theoretical and practical aspects of circulating fluidized bed reactors (CFBRs) for complex chemical systems , 1990 .

[5] S. Stemerding,et al. The pneumatic transport of cracking catalyst in vertical risers , 1962 .

[6] L. H. Chen,et al. Fluidized bed freeboard phenomena: Entrainment and elutriation , 1982 .

[7] W.P.M. van Swaaij,et al. Shear stresses on the wall of a dense gas—solids riser , 1970 .

[8] John R. Grace,et al. High-velocity fluidized bed reactors , 1990 .

[9] Michel Y. Louge,et al. Pressure and voidage gradients in vertical gas-solid risers , 1990 .

[10] B. Jazayeri. Optimize FCC riser design , 1991 .

[11] Octave Levenspiel,et al. Entrainment of solids from fluidized beds I. Hold-up of solids in the freeboard II. Operation of fast fluidized beds , 1990 .

[12] Filip Johnsson,et al. Radial voidage profiles in fast fluidized beds of different diameters , 1991 .